GB/T 25343.1-2010 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25343.1-2010: Railway applications -- Welding of railway vehicles and components -- Part 1: General Status: Valid
Basic dataStandard ID: GB/T 25343.1-2010 (GB/T25343.1-2010)Description (Translated English): Railway applications -- Welding of railway vehicles and components -- Part 1: General Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: S30 Classification of International Standard: 45.060.01 Word Count Estimation: 6,653 Date of Issue: 2010-11-10 Date of Implementation: 2011-03-01 Quoted Standard: GB/T 3375; ISO 17659 Adopted Standard: EN 15085-1-2007, MOD Regulation (derived from): National Standard Approval Announcement 2010 No.8 (Total No.163) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the commitment of new and repair work welding manufacturer's qualification and quality requirements. Thus the series standard design process performance requirements. Production process to achieve high-quality welds, and linked through testing demonstrated the satisfactory quality. This link is defined by the security and by load factor in determining the quality level of the weld obtained by the design process. Quality defects and seam quality level classification is linked to guarantee the achievement of the desired quality level design. According to the weld quality level, provides enterprise certification level, weld inspection grades and welding personnel qualifications. This series of standards for welding rail vehicles and parts manufacturing and maintenance process of metallic materials. This section GB/T25343 rail vehicles and their components for welding gives the definition of the overall proposal and related terms. In addition to the special provisions of the contract, but in this section applies to all welding methods, including GB/T5185 defined in manual welding, semi-automatic welding, fully mechanized welding or automatic welding. This section applies to the welding of steel and aluminum, including the casting of welding. NOTE: This principle is also applicable to other parts of the material (e. g., copper and magnesium) welding. This series of standards does not involve product certification. The series of standards do not apply to special provisions piece of equipment, such as pressure vessels. GB/T 25343.1-2010: Railway applications -- Welding of railway vehicles and components -- Part 1: General---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Railway applications Welding of railway vehicles and components Part 1. General ICS 45.060.01 S30 National Standards of People's Republic of China Railway applications - welding rail vehicles and their components Part 1. General Part 1. General Issued on. 2010-11-10 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 25343 "Railway applications - welding rail vehicles and their components" is divided into five parts. --- Part 1. General; --- Part 2. Welding manufacturer's quality requirements and certification; --- Part 3. Design requirements; --- Part 4. Production requirements; --- Part 5. Inspection, testing and documentation. This section GB/T 25343 Part 1, corresponding to EN15085-1.2007 "Railway applications rail vehicles and their components Welding - Part 1. General. " The partial modification using EN15085-1.2007, the main changes are as follows. --- Remove the EN15085-1.2007's "Preface" and "Introduction." --- To EN15085-1. International Standard (ISO ) 2007 cited and European standards (EN), if the country has a corresponding national standard And all references to the corresponding national standards. --- Remove the EN15085-1.2007 in 3.7 "National security agencies nationalsafetyauthority" terms and definitions. --- Remove the EN15085-1.2007 in appendix A (informative) of. --- Adds three terms. the welding procedures, welding technology assessment reports and welding operators. This section proposed by the People's Republic of China Ministry of Railways. This section from south Qishuyan Locomotive Rolling Stock Technology Research Institute Co., Ltd. under the jurisdiction. This section is drafted. CSR Qishuyan Locomotive & Rolling Stock Technology Research Institute Co., Ltd., CSR Yangtze River Vehicles Co., Ltd., CSR Qishuyan Motorcycle Co., Ltd., CNR Changchun Railway Vehicles Co., Ltd., CSR Zhuzhou Electric Locomotive Co., Ltd., CSR Sifang Locomotive and Rolling Stock Shares Limited. The main drafters of this section. Li Yusheng, Li Jia Liang, Jiang Tian Fang, Fangrong Liang, Zhang Haicang, Hu Liguo, Mao Junming. Railway applications - welding rail vehicles and their components Part 1. General1 ScopeThis series of standards for the field of rail vehicle provides assume a new creation and maintenance of welding manufacturer's qualification and quality requirements. Thus this series of standards to the design process performance requirements, the production process to achieve high-quality welds, as well as through show satisfaction Quality together. This link is defined by security and by load factor determining the grade of weld quality in the design process and get. Quality defects The amount of grading and grade of weld quality is linked, in order to guarantee the achievement of the desired quality level design. According grade of weld quality, provides enterprise Authentication level, welding and weld inspection level qualification. This series of standards applies to welding rail vehicles and parts manufacturing, and maintenance of metallic materials. GB/T 25343 in this part of the welding rail vehicles and their components gives the definition of general recommendations and related terms. In addition to co With special provisions to the provisions of this section apply to all welding methods, including manual welding GB/T 5185 defined, semi-automatic welding, Fully mechanized welding or automatic welding. This section applies to the welding of steel and aluminum, as well as casting welding. Note. The principle of this section is also applicable to other materials (such as copper and magnesium) welding. This series does not involve certification standard. This series of standards do not apply to special regulations piece of equipment such as pressure vessels.2 Normative referencesThe following documents contain provisions which, through reference GB/T 25343 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 3375 Welding terminology ISO 17659 Welding - Multilingual terms for welded joints shown3 Terms and DefinitionsGB/T 3375, ISO 17659 and established the following terms and definitions apply to this section. 3.1 Manufacturer certification bodies manufacturercertificationbody By national authorities within the scope of this series of standards recognized and have the ability according to the GB/T 25343.2 requirements for manufacturers Authentication authority. 3.2 Authentication level certificationlevel (CP) for welding rail vehicles or parts according to criteria classification grade of weld quality. Authentication level is represented by "CL". 3.3 Grade of weld quality weldperformanceclass Welded joints based on stress level and determine the level of security and performance requirements of welded joints. Grade of weld quality with "CP" indicates. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25343.1-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25343.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25343.1-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25343.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
