GB/T 25314-2010 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25314-2010: Requirements of corrosion management program for mechanical equipment in nuclear power plants Status: Valid
Basic dataStandard ID: GB/T 25314-2010 (GB/T25314-2010)Description (Translated English): Requirements of corrosion management program for mechanical equipment in nuclear power plants Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F23 Classification of International Standard: 27.120�� Word Count Estimation: 6,661 Date of Issue: 2010-11-10 Date of Implementation: 2011-05-01 Regulation (derived from): Announcement of Newly Approved National Standards No. 8 of 2010 (total 163) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the nuclear power plant machinery and equipment corrosion management program content requirements, including corrosion risk analysis, critical equipment corrosion sensitive screening, preventive anti-corrosion and other content management and documentation system for nuclear power plant corrosion sensitive critical equipment corrosion management program development. GB/T 25314-2010: Requirements of corrosion management program for mechanical equipment in nuclear power plants---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Requirements of corrosion management program for mechanical equipment in nuclear power plants ICS 27.120 F23 National Standards of People's Republic of China Nuclear power plant machinery and equipment corrosion management program content requirements Issued on. 2010-11-10 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is proposed and managed by the China Electricity Council. This standard was drafted. Suzhou Institute of Thermal Engineering Co., Ltd. The main drafters of this standard. Liu Feihua, any love, Fick Xun, Chen Hanming, Zhao Wanxiang, aqua regia Yong, Zhang Zhongwei, Zhao Zhong Jiang, Li Yan. Nuclear power plant machinery and equipment corrosion management program content requirements1 ScopeThis standard specifies the contents of the nuclear power plant machinery and equipment corrosion management program requirements, including the risk of corrosion analysis, key equipment corrosion sensitive screen Election, anti-corrosion preventive and document management system and so on. This standard applies to nuclear power plant corrosion sensitive key equipment corrosion management program development.2 Terms and definitionsThe following terms and definitions apply to this standard. 2.1 Risk of corrosion corrosionrisk Under service conditions, mechanical equipment and the probability of occurrence of corrosion hazard. 2.2 Corrosion preventive management preventivecorrosionmanagement In order to avoid or mitigate the corrosion of equipment, machinery and equipment to carry out planned, periodic active anti-corrosion management activities. Including regular Corrosion inspection, corrosion defect treatment, corrosion assessment. 2.3 Corrosion sensitive key equipment keycorrosion-sensitiveequipment And high risk of corrosion and crew safety, reliability, economy-related machinery and equipment. 2.4 Corrosion management program corrosionmanagementprogram Collection of corrosion preventive management activities.3 General3.1 General Requirements 3.1.1 key equipment are susceptible to corrosion preventive corrosion management, should develop nuclear power plant machinery and equipment corrosion management program. 3.1.2 prior to the preparation of the corrosion management program to deal with the whole plant machinery and equipment to carry out the corrosion risk analysis. 3.1.3 Nuclear Power Plant machinery and equipment corrosion corrosion management program should be developed and implemented document management system. 3.1.4 should regularly evaluate the effectiveness of adaptive and corrosion management program, according to the experience feedback and effects of nuclear power plant machinery Equipment corrosion management program be revised. 3.2 Content Requirements 3.2.1 The basis for determining the content and methods of corrosion risk analysis. 3.2.2 determine the corrosion sensitive and critical equipment selection principles, establish corrosion sensitive critical device database. 3.2.3 determining corrosion preventive management approach and content. 3.2.4 determine the implementation of document management system corrosion, specify the contents and elements of various types of files that should be included.4 Corrosion Risk Analysis4.1 Corrosion Risk Analysis Background Corrosion risk analysis should be aware of at least the following information. a) nuclear power plant machinery and equipment in service conditions, including environmental and operating conditions; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25314-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25314-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25314-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25314-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
