Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 24797.3-2014 English PDF

Q: How long will the true-PDF of English version of GB/T 24797.3-2014 be delivered?

Upon your order, we will start to translate GB/T 24797.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 24797.3-2014_English with my colleagues?

Yes. The purchased PDF of GB/T 24797.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24797.3-2014: Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24797.3-2014	114	Add to Cart	3 days	Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)	Valid

Similar standards

GB/T 40125 GB/T 40126 GB/T 36089 GB/T 45481 GB/T 45599 GB/T 24797.2

Basic data

Standard ID: GB/T 24797.3-2014 (GB/T24797.3-2014)
Description (Translated English): Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G35
Classification of International Standard: 83.060
Word Count Estimation: 6,653
Date of Issue: 7/8/2014
Date of Implementation: 12/1/2014
Quoted Standard: GB/T 1633-2000; GB/T 19466.3-2004; GB/T 20220-2006; ISO 1872-1-1993
Adopted Standard: ISO 20299-3-2008, IDT
Regulation (derived from): 2014 National Standards Bulletin No. 18
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the material and physical properties of synthetic rubber used in non-peel-packaging film. This standard applies to ethylene - propylene - diene rubber (EPDM), acrylonitrile - butadiene rubber (NBR), hydrogenated acrylonitrile - but

GB/T 24797.3-2014: Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Film for wrapping rubber bales Part 3. Ethylene-propylene-diene rubber (EPDM), acrylonitrilebutadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM) ICS 83.060 G35 National Standards of People's Republic of China Rubber packaging film Part 3. an ethylene - propylene - diene rubber (EPDM), acrylonitrile - butadiene rubber (NBR), Hydrogenated acrylonitrile - butadiene rubber (HNBR), Vinyl acrylate rubber (AEM) and Acrylic rubber (ACM) Filmforwrappingrubberbales-Part 3. Ethylene-propylene-diene rubber (EPDM), acrylonitrilebutadienerubber (NBR), hydrogenated nitrile-butadienerubber (HNBR), acrylic-ethylenerubber (AEM) and acrylicrubber (ACM) (ISO 20299-3.2008, IDT) Issued on. 2014-12-01 2014-07-08 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 24797 "rubber packaging film" is divided into three parts. --- Part 1. Butadiene rubber (BR) and styrene - butadiene rubber (SBR); --- Part 2. natural rubber; --- Part 3. an ethylene - propylene - diene rubber (EPDM), acrylonitrile - butadiene rubber (NBR), hydrogenated acrylonitrile - butadiene rubber Rubber (HNBR), vinyl acrylate rubber (AEM) and acrylate rubber (ACM). This section GB/T Part of 324,797. This section drafted in accordance with GB/T 1.1-2009 given rules. This part identical with ISO 20299-3.2008 "ethylene - propylene - diene rubber (EPDM), acrylonitrile - butadiene rubber (NBR), Hydrogenated acrylonitrile - butadiene rubber (HNBR), vinyl acrylate rubber (AEM) and acrylate rubber (ACM) ". This part is proposed by the China Petroleum and Chemical Corporation. This portion of the rubber division Technical Committee (SAC/TC35/SC6) and by the National Standardization Technical Committee rubber products synthetic rubber. This section drafted by. China National Petroleum Corp. Oil Chemical Research Institute, Kaidi Northwest Rubber Co., Ltd. Ningbo Shun Rubber Co., Ltd. Ze. The main drafters of this section. Sun Lijun, Lu Yan, Li silver, Wang Chunlong, Wei Yuli, Li Shuping, Zhang Zhaoqing.

Introduction

In order to ensure the rubber during storage, can be separated from each gel alone does not stick to one another, usually in the right film for the rubber blocks package. Most common synthetic rubber is made of a rubber compound dried pressed into blocks, covering packaging films in automated procedures, the final outer Packaging, packaging films should thus have sufficient strength to withstand the packaging process are subjected to the force. Meanwhile, in the rubber during storage Cold, and therefore requires a packaging film should have sufficient strength to withstand the pressure of the cold flow of rubber produced by the process, in order to prevent breakage of the film Rubber and packaging cause adhesions. Before rubber mixing, if the packaging film on each strip of rubber on the package, both difficult and uneconomical, so the operator is usually connected directly to the rubber Kneaded together with its packaging film, which requires the film in the rubber mixing process can be well dispersed in rubber to it, it should be lower than the melting point of mixing The process temperature is reached (usually 120 ℃ ~ 160 ℃). There is no direct method for measuring dispersion. If an open roll mill mixing or adhesion process can not achieve the desired dispersion temperature, should be stripped of packaging film, or the use of a lower melting point Envelope. Rubber packaging film Part 3. an ethylene - propylene - diene rubber (EPDM), acrylonitrile - butadiene rubber (NBR), Hydrogenated acrylonitrile - butadiene rubber (HNBR), Vinyl acrylate rubber (AEM) and Acrylic rubber (ACM) Warning. Use of this standard should be familiar with general laboratory operations. This standard does not use the possible security problems do Any statement. Responsibility of the user to establish appropriate safety and health mechanisms and to ensure that countries with formal laboratory conditions.

1 Scope

This section GB/T 24797 specifies the physical properties of materials and synthetic rubber used in non-peel-packaging film. This section applies to ethylene - propylene - diene rubber (EPDM), acrylonitrile - butadiene rubber (NBR), hydrogenated acrylonitrile - butadiene rubber Rubber (HNBR), vinyl acrylate rubber (AEM) and acrylate rubber (ACM). This section does not apply required peelable film.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1633-2000 thermoplastics Vicat softening temperature (VST) is measured (ISO 306.1994, IDT) GB/T 19466.3-2004 plastic differential scanning calorimetry (DSC) - Part 3. melting and crystallization temperature and enthalpy determination (ISO 11357-3.1999, IDT) GB/T 20220-2006 plastic film and sheeting average sample thickness, volume average mass per unit area and thickness measurement Weighing France (weighing thickness) (ISO 4591.1992, IDT) ISO 1872-1.1993 Polyethylene (PE) molding and extrusion materials - Part 1. Designation system and basis [Polyethylene (PE) mouldingandextrusionmaterials-Part 1. Designationsystemandbasisforspecifications]

3 Materials

Packaging film should be prepared by one of the following materials. a) low-density polyethylene (of LDPE); b) low-density polyethylene and an ethylene - vinyl acetate polymer (EVAC,) blend; Ethylene c) appropriate specifications - vinyl acetate polymer (EVAC); Small non-olefin monomer content d) other 1-olefin monomer content of less than 50% (by mass) of the ethylene copolymer with functional groups and 3% (mass fraction) of the ethylene copolymer (see ISO 1872-1.1993). Note. there may be an antioxidant, a slip agent and a release agent. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24797.3-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24797.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24797.3-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24797.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.