GB/T 24380-2009 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24380-2009: Textile machinery and accessories -- Twin wire heads for weaving machines with head frames Status: Valid
Basic dataStandard ID: GB/T 24380-2009 (GB/T24380-2009)Description (Translated English): Textile machinery and accessories -- Twin wire heads for weaving machines with head frames Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: W90 Classification of International Standard: 59.120.30 Word Count Estimation: 6,674 Date of Issue: 2009-09-30 Date of Implementation: 2010-03-01 Adopted Standard: ISO 364-1983, MOD Regulation (derived from): National Standard Approval Announcement 2009 No.10 (Total No.150) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the size of the loom heald wire with ensemble, classification and labeling. This standard applies to the wire harness loom heald used. GB/T 24380-2009: Textile machinery and accessories -- Twin wire heads for weaving machines with head frames---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Textile machinery and accessories. Twin wire healds for weaving machines with heald frames ICS 59.120.30 W90 National Standards of People's Republic of China Textile machinery and accessories Mechanized loom heddle wire (ISO 364. 1983, MOD) Posted 2009-09-30 2010-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts the International Standard ISO 364. 1983 "Textile machinery and accessories mechanized loom heddle wire" (in English). This standard is based on ISO 364. 1983 redrafted. In order to adapt to China's national conditions, this standard when international standards have been modified, And gives a list of the technical differences and their reasons in Appendix A for reference. For ease of use, ISO 364. 1983 made the following editorial changes. a) "1" and the "scope" be replaced by "scope." "This International Standard" be replaced by "of this standard." b) "1" and the increase of the scope of this standard formulation. c) "2 dimension", add "the size of Table 1, Figure 1", "Size Chart" corresponding to "Table." d) "1", the code size between the defined text by "---" indicates. e) "1", the note "๎" "๎๎" instead Footnote "a" "b" represents. f) "3 flag", the "number of the international standard ISO 364" to "this standard number GB/T 24380". Appendix A of this standard is an informative annex. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Wuxi Textile Machinery Research Institute, Zhejiang Industrial Co. consciousness. The main drafters of this standard. Zhao Jiping, Wang consciousness, Zhang Yuhong. Textile machinery and accessories Mechanized loom heddle wire1 ScopeThis standard specifies the use of a loom heald frame size, classification and marking wire ensemble. This standard applies to the wire heald loom heddle used.2 DimensionsDimensions shown in Figure 1, Table 1. Chou --- Fully ear width; Chou 1 --- twisted into mechanized eye width; Chou 2 --- Fully insert eye width; L --- Fully two ears from the inner side; From the ear and the eye center of Fully mechanized Lb1 --- on. Note. For request, for the eye can offer mechanized diamond (FA type), O-long (FB type) wire ensemble. a preference should be given mechanized eye opening right (R) wire ensemble. b Normally, the eye is fully embedded into the center position in the ensemble, such as off-center distance between the ear and the fully mechanized eye center should be otherwise. Figure 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24380-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24380-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24380-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24380-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
