GB/T 24377-2009 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24377-2009: Textile machinery and accessories -- Metallic card clothing -- Definitions of dimensions, types and mounting
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24377-2009	279	Add to Cart	3 days	Textile machinery and accessories -- Metallic card clothing -- Definitions of dimensions, types and mounting	Valid

Similar standards

FZ/T 93048.1   FZ/T 93019   GB/T 24372   GB/T 24373   GB/T 24371   

Basic data

Standard ID: GB/T 24377-2009 (GB/T24377-2009)
Description (Translated English): Textile machinery and accessories -- Metallic card clothing -- Definitions of dimensions, types and mounting
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: W90
Classification of International Standard: 59.120.30
Word Count Estimation: 12,160
Date of Issue: 2009-09-30
Date of Implementation: 2010-03-01
Adopted Standard: ISO 5234-2005, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.10 (Total No.150)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides for a variety of metallic card clothing section and toothed rack, and provides the size definition, tooth and package volume.

GB/T 24377-2009: Textile machinery and accessories -- Metallic card clothing -- Definitions of dimensions, types and mounting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile machinery and accessories. Metalllic card clothing. Definitions of dimensions, types and mounting ICS 59.120.30 W90 National Standards of People's Republic of China Textile machinery and accessories metal needle cloth Size definition, tooth and wrapping (ISO 5234.2005, MOD) Posted 2009-09-30 2010-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 5234.2005 "Textile machinery and accessories metal needle cloth size definitions, tooth and wrapping" (in English). This standard is based on ISO 5234.2005 redrafted with ISO 5234.2005 technical differences are as follows. --- Increase "Figure 15 pairs of curved rack" and its graphics 3.4. Reason for the above technical differences are. the front and the back teeth teeth widely used internationally are curved rack, especially Astoria rack, Its capture, the ability to gather and transfer fiber excellent in applicability, and therefore be supplemented in this standard. For ease of use, this standard of ISO 5234.2005 made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) Remove ISO 5234 preface; c) by deleting ISO 5234 Figure 3, the "key" translation Figure 4; Appendix A of this standard is a normative appendix. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Qingdao Textile Clothing Co., Ltd. Changzhou reed, Kingland Branch Co., Guangshan white shark needle Cloth Co., Ltd. Shanghai Far East fillet limited liability company, Shaanxi Institute of textile equipment. The main drafters of this standard. Zhao Yusheng, Fu Xiaoyan, Chenyou Quan, Wu Jin, Zhou Jianping, Zhang Yonggang, LIANG Qing new, Chen Xianghong, Anguo Long. Textile machinery and accessories metal needle cloth Size definition, tooth and wrapping

1 Scope

This standard lists the metallic wire of various sections and toothed rack, and provides for the definition of size, tooth and wrapping. 2 cross-section of the metal rack 2.1 wrapping on the grooved rollers or roller without slot rack-sectional surface Common base rack size Figure 1 and Table A. 1. Note. The main dimensions see ISO 9903-1. Figure 1 Common base rack 2.2 wrapping on the drum rack sectional slotless Self-locking base (V-type) rack dimensions shown in Figure 2 and Table A. 1. Note. The main dimensions see ISO 9903-2. a reference line. 2 self-locking base (Vp-type) rack

3 tooth

3.1 Overview All forms of the rack (facing substrate) shown in Figure 3. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24377-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24377-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24377-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24377-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.