GB/T 24375-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24375-2009: Textile machinery and accessories -- Bottom flutter rollers for drafting systems
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24375-2009	139	Add to Cart	3 days	Textile machinery and accessories -- Bottom flutter rollers for drafting systems	Valid

Similar standards

FZ/T 93048.1   FZ/T 93019   GB/T 24372   GB/T 24373   GB/T 24371   

Basic data

Standard ID: GB/T 24375-2009 (GB/T24375-2009)
Description (Translated English): Textile machinery and accessories -- Bottom flutter rollers for drafting systems
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: W90
Classification of International Standard: 59.120.10
Word Count Estimation: 6,667
Date of Issue: 2009-09-30
Date of Implementation: 2010-03-01
Quoted Standard: GB/T 5459-2003
Adopted Standard: ISO 5233-1978, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.10 (Total No.150)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the spinning preparatory and spinning machinery drafting device face down roller diameter and width. This standard applies to the spinning preparatory and spinning machinery drafting device with bottom rollers.

GB/T 24375-2009: Textile machinery and accessories -- Bottom flutter rollers for drafting systems

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile machinery and accessories. Bottom fluter rollers for drafting systems ICS 59.120.10 W90 National Standards of People's Republic of China Textile machinery and accessories Under the draft device with rollers (ISO 5233. 1978, MOD) Posted 2009-09-30 2010-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts the International Standard ISO 5233. 1978 "Textile machinery and accessories under the roller drafting device" (in English). This standard is based on ISO 5233. 1978 redrafted. In order to adapt to the conditions of our country, the present standard of ISO 5233. 1978 made the following technical modifications. A) "Table 1", the increasing size of 28.5mm diameter, 28mm and preferred to size. b) "Table 1", the increase in size Face width 34mm. For ease of use, ISO 5233. 1978 made the following editorial changes. a) "this International Standard" be replaced by "of this standard." b) "Scope" be replaced by "scope", add "This standard applies to spinning preparatory and spinning mechanical drawing apparatus under rollers." c) "2 References" to "2 Normative references" to preserve ISO 94 (ie, GB/T 5459-2003), and increased specification References Lead files. d) due to ISO 3464 standard has been abolished, so cancel the standard reference. According to GB/T 1.1 requirements, the ISO 98 (GB/T 24376-2009 Textile machinery and accessories - Spinning preparatory and spinning machinery roller wrap on main dimensions) Incorporated by reference. e) "3 Dimensions" in Table 1 and Table 2 are combined in Table 1, increasing the header, and the unit of measure in the table on the right-table, with "Millimeters" means. f) "1", "2", the "cot" with two-dot chain line, "said Laura tooth" with Helical represented. The standard proposed by China Textile Industry Association. This standard by the national textile machinery and accessories for Standardization Technical Committee. This standard was drafted. Wuxi Textile Machinery Research Institute, and with the textile machinery manufacturing Co., Jingwei Textile Machinery Company Limited Yuci Branch, Jiangyin City, east Jie Textile Machinery Co., Ltd., Hengyang Textile Machinery Factory. The main drafters of this standard. Zhao Jiping, Cuigui Sheng, Xu Mei, Zangchen Dong Yang Yanling, Zhang Yuhong. Textile machinery and accessories Under the draft device with rollers

1 Scope

This standard specifies the spinning preparatory and spinning mechanical drafting device by the following roller diameter and face width. This standard applies to spinning preparatory and spinning mechanical drafting device by the following roller.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5459-2003 Textile machinery and accessories ring spinning and ring twisting machine spindle gauge (ISO 94. 1982, IDT)

3 Dimensions

Figure 1, Figure 2 and Table 1. Figure 1 roving machine spinning and bottom rollers Figure 2 bottom rollers spinning preparation machinery ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24375-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24375-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24375-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24375-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.