GB/T 23655-2009 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23655-2009: Test for the cure level of compound latex Status: Valid
Basic dataStandard ID: GB/T 23655-2009 (GB/T23655-2009)Description (Translated English): Test for the cure level of compound latex Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G40 Classification of International Standard: 83.140.99 Word Count Estimation: 8,839 Date of Issue: 2009-04-24 Date of Implementation: 2009-12-01 Regulation (derived from): PRC National Standard Approval Announcement 2009 No.6 (Total No.146) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the method with the determination of the extent of vulcanized latex method A, Method B. This standard applies to the preparation of natural latex with the determination of the degree of cure. Does not apply with adhesive curing degree of determination. GB/T 23655-2009: Test for the cure level of compound latex---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test for the cure level of compound latex ICS 83.140.99 G40 National Standards of People's Republic of China Determination of the degree of cure with latex Posted 2009-04-24 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products latex products Standardization Technical Committee Technical Committee (SAC/TC35/SC4) Centralized. This standard is mainly drafted by. Zhanjiang Exit Inspection and Quarantine, China Rubber Group Zhuzhou Industry Research and Design Institute of rubber, plastics, health Ansell Health products company. The main drafters of this standard. CSL, Deng Zhi, Xiao Lian. Determination of the degree of cure with latex1 ScopeThis standard specifies the method for the determination with vulcanized latex degree method A, method B. This standard applies to natural rubber latex formulated with the degree of vulcanization of the determination does not apply with adhesive curing degree of determination.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8290 Natural rubber latex concentrate sampling3 DeterminationDetermination of the degree of cure with latex into the method A, method B. 3.1 Method A degree of swelling method 3.1.1 Principle The degree of cure with different latex film whose degree of swelling in toluene are different, with smaller degree of swelling of the latex film, the more the degree of cure Deep, with the degree of vulcanization latex can be used to characterize the degree of swelling. 3.1.2 Instruments 3.1.2.1 mesh, 80 mesh. 3.1.2.2 ruler, precision 0.5mm. 3.1.3 Reagents 3.1.3.1 Toluene. chemically pure. 3.1.3.2 talc. 3.1.3.3 pigment. 3.1.4 Test procedure 3.1.4.1 screen filter used with latex. 3.1.4.2 according to GB/T 8290 with latex extract (3.1.4.1) about 20mL, and add 2 to 3 drops of paint, stirring with a glass rod until Latex uniform color. 3.1.4.3 along the edge of the glass sheet latex poured onto a clean glass plate level. 3.1.4.4 Stainless steel rod flat latex evenly on a flat glass plate, keeping a uniform film thickness. 3.1.4.5 The wet latex film of (a thickness of about 2mm) placed before the drying fan, the time for at least 10min. 3.1.4.6 In front of the latex film sprinkle talcum powder to remove it from the glass plate, then sprinkle talcum powder on the back, and finally the latex film Talc shaken off. 3.1.4.7 with a cutter and cut two test pieces. Each test piece using a ruler to measure the four directions, four times the diameter. Then calculate the average value of D1. 3.1.4.8 The wafer immersed 30min in a petri dish filled with toluene, the diameter of each wafer after swelling was measured with a ruler four four directions Second, calculate the average D2. Before a measurement of the pressure in carefully slide the specimen slide against the sample, the measurement should be ruler in culture Dish is measured. 3.1.5 Calculation Results With latex degree of swelling (%) by the formula (1). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23655-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23655-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23655-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23655-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
