GB/T 23651-2009 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23651-2009: Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23651-2009	194	Add to Cart	3 days	Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide	Valid

Similar standards

GB/T 24131.1   GB/T 20726   GB/T 24153   GB/T 18396   GB/T 15340   GB/T 23655   

Basic data

Standard ID: GB/T 23651-2009 (GB/T23651-2009)
Description (Translated English): Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G40
Classification of International Standard: 83.060
Word Count Estimation: 10,151
Date of Issue: 2009-04-24
Date of Implementation: 2009-12-01
Adopted Standard: ISO 18517-2005, IDT
Regulation (derived from): PRC National Standard Approval Announcement 2009 No.6 (Total No.146)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the vulcanized rubber or thermoplastic rubber hardness testing guidelines. Hardness is one of the indicators of material properties, the standard is intended to recognize its importance and helps select the appropriate hardness testing methods.

GB/T 23651-2009: Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide ICS 83.060 G40 National Standards of People's Republic of China GB/T 23651-2009/ISO 18517.2005 Vulcanized or thermoplastic rubber hardness testing Introduction and Guide (ISO 18517.2005, IDT) Posted 2009-04-24 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to international standards ISO 18517.2005 "vulcanized rubber or thermoplastic rubber hardness testing --- --- Introduction and means South "(in English). This standard is equivalent translation ISO 18517.2005. For ease of use, this standard made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) Remove the preface international standards; c) use a decimal point instead of a decimal comma ",". ","; d) Increased use Introduction to guide. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standards Commission rubber rubber physical and chemical test methods Technical Committee (SAC/TC35/SC2) centralized. This standard was drafted. Guangdong Institute of Metrology. Drafters of this standard. Chen Minghua, high Charming Tang Chang society. GB/T 23651-2009/ISO 18517.2005

Introduction

This standard vulcanized rubber or thermoplastic rubber hardness testing all aspects of providing general introduction and guide. This standard combines the GB/T 6031 (idtISO 48), GB/T 531.1 (idtISO 7619-1) and GB/T 531.2 (idtISO 7619-2) of ISO 18898 rubber hardness meter calibration and verification

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Select the appropriate hardness scale, hardness value 0 represents Young's modulus of the material is 0, the hardness value of 100 representatives of the Young's modulus of the material without Infinity. Note. The hardness values \u200b\u200bwithin the normal range, it should meet the following conditions. a) the incremental international rubber hardness is always expressed approximately the same percentage of the increment of the Young's modulus; b) For high elastic rubber, rubber hardness and international Shore A hardness of approximately the same value. 3.2 Standard thickness and having an area larger than the minimum sample size specified edge, operating procedures in accordance with GB/T 6031 provisions obtained GB/T 23651-2009/ISO 18517.2005 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23651-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23651-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23651-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23651-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.