GB/T 23565.4-2009 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23565.4-2009: Sliding guide steel-plate die sets of stamping dies -- Part 4: Four-pillar die sets Status: Valid
Basic dataStandard ID: GB/T 23565.4-2009 (GB/T23565.4-2009)Description (Translated English): Sliding guide steel-plate die sets of stamping dies -- Part 4: Four-pillar die sets Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J46 Classification of International Standard: 25.120.30 Word Count Estimation: 8,833 Date of Issue: 2009-04-02 Date of Implementation: 2010-01-01 Quoted Standard: GB/T 2861.1; GB/T 2861.3; GB/T 23562.4; GB/T 23566.4; JB/T 8050 Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the sliding guide die mold steel mold of four pillar dimensions and markings. This section applies to die sliding guide plate mold four pillar mold. GB/T 23565.4-2009: Sliding guide steel-plate die sets of stamping dies -- Part 4: Four-pillar die sets---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Sliding guide steel-plate die sets of stamping dies Part 4. Four-pillar die sets ICS 25.120.30 J46 National Standards of People's Republic of China Sliding guide die steel mold Part 4. Four pillar sets Posted 2009-04-02 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 23565 "die slide guide plate mold" is divided into four parts. --- Part 1. the rear pillar sets; --- Part 2. diagonal pillar sets; --- Part 3. intermediate pillar sets; --- Part 4. 4 post mold. This section GB/T Part of 423,565. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan Mold factory Nanhai District of Foshan City, Guangdong-metal plastic mold Limited. The main drafters of this section. WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Qi Wei root, Liang Da Zhi, Feng double. Sliding guide die steel mold Part 4. Four pillar sets1 ScopeThis section GB/T 23565 specifies the sliding guide plate mold die 4 post mold of dimensions and markings. This section applies to the sliding guide die steel mold four pillar sets.2 Normative referencesThe following documents contain provisions which, through reference GB/T 23565 in this section constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2861.1 Part 1 die guide. slide guide pillar GB/T 2861.3 Part 3 die guides. Slide guide bushings GB/T 23562.4 lower die plate mold base - Part 4. Four pillar lower die GB/T 23566.4 die mold base plate on the sliding guide - Part 4. Four die holder guide post JB/T 8050 Die mold technical conditions3 DimensionsSliding guide 4 post mold structure and dimensions shown in Figure 1, Table 1. 1 --- punch holder; 2 --- lower die; 3 --- pillar; 4 --- guide sleeve. Note. Allow the use of removable guide post. 1 sliding guide 4 post mold ...... |
