GB/T 23565.1-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23565.1-2009: Die steel mold sliding guide -- Part 1: the rear pillar mold
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23565.1-2009	139	Add to Cart	3 days	Die steel mold sliding guide -- Part 1: the rear pillar mold	Valid

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 23565.4   GB/T 23562.1   GB/T 23565.3   

Basic data

Standard ID: GB/T 23565.1-2009 (GB/T23565.1-2009)
Description (Translated English): Die steel mold sliding guide -- Part 1: the rear pillar mold
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 6,697
Date of Issue: 2009-04-02
Date of Implementation: 2010-01-01
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the sliding guide die mold steel mold of the rear pillar dimensions and markings. This section applies to die sliding guide plate mold rear pillar mold.

GB/T 23565.1-2009: Die steel mold sliding guide -- Part 1: the rear pillar mold

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Die steel mold sliding guide part 1. the rear pillar mold ICS 25.120.30 J46 National Standards of People's Republic of China Die - sliding steel plate mold Part 1. rear guide post mold 2009-04-02 release 2010-01-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released

Foreword

GB/T 23565 "die sliding guide steel plate mold" is divided into four parts. - Part 1. rear guide post mold; - Part 2. diagonal guide post mold; - Part 3. intermediate guide post mold; - Part 4. Four guide post molds. This part is part 1 of GB/T 23565. This part of the National Standardization Technical Committee of Mold (SAC/TC33) proposed and centralized. This part of the drafting unit. Guilin Institute of Electrical Science, Guilin University of Electronic Science and Technology, Hangzhou Xiaoshan precision molds standard Factory, Zhenjiang Chuanshan Mold factory, Foshan Nanhai District, Guangdong-metal plastic mold Co., Ltd. The main drafters of this part. Weng Shi-zhen, Liao Hongyi, Zhang Yuqin, Qi Weigen, Liang Dazhi, Feng Shuang. Die - sliding steel plate mold Part 1. rear guide post mold

1 Scope

This part of GB/T 23565 specifies the dimensions and marking of the rear guide post molds of the die slide guide steel mold frame. This part is applicable to the rear guide post mold of the die slide guide steel plate mold.

2 normative reference documents

The terms of the following documents are the terms of this part by reference to this part of GB/T 23565. Any reference to the date of the document, Any subsequent amendments (not including corrigenda) or revisions shall not apply to this part, however, it is encouraged to enter into an agreement under this Part The parties study whether the latest versions of these files can be used. For undated references, the latest edition applies to this section. GB/T 2861.1 Die guide devices - Part 1. Sliding guide posts Die - oriented devices - Part 3. Sliding guide bushings GB/T GB/T 23562.1 Die steel plate under the mold part of the first part. the rear guide column under the mold base GB/T 23566.1 Die for sliding guide plate on steel plate - Part 1. Die holder on rear side post JB/T 8050 die mold frame technical conditions

3 size specifications

Sliding guide rear side of the column structure and size specifications shown in Figure 1, Table 1. 1 --- on the mold base; 3 --- guide column; 2 --- under the mold base; 4 --- guide sleeve. Note. Allowable use of removable column. Figure 1 sliding guide rear guide column mold ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23565.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23565.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23565.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23565.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.