GB/T 23480.2-2009 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23480.2-2009: Small hole high speed drilling electro-discharge machines -- Part 2: Parameters
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23480.2-2009	189	Add to Cart	3 days	Small hole high speed drilling electro-discharge machines -- Part 2: Parameters	Valid

Similar standards

GB/T 38193   GB 16454   JB/T 8490   GB/T 14896.1   GB/T 45376   GB/T 23480   

Basic data

Standard ID: GB/T 23480.2-2009 (GB/T23480.2-2009)
Description (Translated English): Small hole high speed drilling electro-discharge machines -- Part 2: Parameters
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J59
Classification of International Standard: 25.080.99
Word Count Estimation: 8,863
Date of Issue: 2009-04-02
Date of Implementation: 2009-11-01
Quoted Standard: GB/T 14896.1; GB/T 14896.2; GB/T 19764-2005
Regulation (derived from): National Standard Approval Announcement 2009 No.4 (Total No.144)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides high-speed small hole EDM machine tool parameters. This section applies to the newly designed high-speed small hole EDM machine tools (hereinafter referred to as "Machine").

GB/T 23480.2-2009: Small hole high speed drilling electro-discharge machines -- Part 2: Parameters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Small hole high speed drilling electro-discharge machines Part 2. Parameters ICS 25.080.99 J59 National Standards of People's Republic of China High-speed small hole EDM machine tools Part 2. Parameters Posted 2009-04-02 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23480 "high speed small hole EDM machine tools" is divided into two parts. --- Part 1. Terminology and testing of accuracy; --- Part 2. parameter. This is Part 2 GB/T 23480 of. Please note that some of the content of this section may involve patents. This part of the release mechanism should not bear the responsibility to identify these patents. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee special machine tools (SAC/TC161) centralized. This section is drafted. Suzhou EDM Machine Tool Institute. The main drafters of this section. First Fu Sen, Yu Zhi three king should be. This section first release. High-speed small hole EDM machine tools Part 2. Parameters

1 Scope

This section GB/T 23480 specifies the high-speed small hole EDM machine tools parameters. This section applies to the newly designed high-speed small hole EDM machine tools (hereinafter referred to as the "Machine").

2 Normative references

The following documents contain provisions which, through reference GB/T 23480 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 14896.1 machine tools - Terminology - Part 1. Basic terminology GB/T 14896.2 machine tools - Terminology - Part 2. EDM machine GB/T 19764-2005 priority number and priority number of the entire value range of Selection Guide (ISO 497. 1973, IDT)

3 Terms and Definitions

GB/T 14896.1 and GB/T 14896.2 well established in the following terms and definitions apply to this part of the GB/T 23480 of. 3.1 Nose to worktable maximum distance guide.

4 Parameters

Machine of the type shown in Figure 1, the machine should be consistent with the parameters specified in Table 1. Coordinate systems and motion machine named reference GB/T 19660-2005 [1] regulations. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23480.2-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23480.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23480.2-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23480.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.