Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 22923-2008 PDF English

US$130.00 · In stock · Download in 9 seconds
GB/T 22923-2008: Determination of nitrogen, phosphorus and potassium for fertilizers by auto analyzer
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 22923-2008130 Add to Cart Auto, 9 seconds. Determination of nitrogen, phosphorus and potassium for fertilizers by auto analyzer Valid

Similar standards

GB 18382   GB/T 19203   GB/T 45891   

GB/T 22923-2008: Determination of nitrogen, phosphorus and potassium for fertilizers by auto analyzer


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT22923-2008
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 65.080 G 20 Determination of nitrogen, phosphorus and potassium for fertilizers by auto analyzer Issued on: DECEMBER 31, 2008 Implemented on: AUGUST 01, 2009 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Test methods ... 4

Foreword

This standard was proposed by the China Petroleum and Chemical Industry Association. This standard shall be under the jurisdiction of the National Standardization Technical Committee on Fertilizer and Soil Conditioner (SAC/TC 105). The drafting organizations of this standard. National Fertilizer Quality Supervision and Inspection Center (Shanghai), Tianji Coal Chemical Industry Group Co., Ltd., Shanghai Shengsheng Automation Analysis Instrument Co., Ltd. The main drafters of this standard. Zhang Minghong, Zhang Jiahong, Duan Lulu, Li Lihua, He Jianzhong, Wu Juan, Liu Wanqing. This standard is the first release. Determination of nitrogen, phosphorus and potassium for fertilizers by auto analyzer

1 Scope

This standard specifies the method for the determination of nitrogen, phosphorus and potassium in fertilizers using auto analyzers. This standard applies to the determination of nitrogen, phosphorus and potassium in fertilizers. Flow analyzer method is not applicable to the fertilizer containing organic matters, AND the nitrogen content determination method is not applicable to the fertilizer containing nitrogen of more than 40%.

2 Normative references

The provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard; however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. HG/T 2843 Chemical fertilizer products - Standard volumetric, standard, reagent and indicator solutions for chemical analysis

3 Test methods

The reagents, solutions and water used in this standard shall comply with the requirements of HG/T 2843, unless otherwise their specifications and preparation methods are indicated. 3.1 Determination of nitrogen content - Nitrogen analyzer method 3.1.1 Principle The nitrate in the acidic medium is reduced into the ammonium salt, which is digested by concentrated sulfuric acid in the presence of a mixed catalyst to convert the amide nitrogen into an ammonium salt. Ammonia is distilled from the alkaline solution, AND the ammonia is absorbed with boric acid absorption solution AND then titrated with the sulfuric acid standard titration solution. Automatic nitrogen analyzer can integrate such functions as distillation, titration, result display, or calculation, etc., to finish determination automatically and quickly. WEIGH the sample of total nitrogen content of about 100 mg and nitrate nitrogen content of less than 25 mg (accurate to 0.0002 g) in the digestion tube; ADD 0.5 g of chromium powder; USE a small amount of water to wash the tube wall; PLACE the digestion tube in a ventilation cabinet; ADD 5 mL of hydrochloric acid in the digestion tube; LET it stand at room temperature for at least 5 min, (BUT not exceeding 10 min). PLACE the digestion tube in the digestion furnace which has been heated to 300 °C in advance; INSERT in the pear-shaped glass funnel; HEAT to boil it for 1 min ~ 2 min; PAY attention to avoid drying it; COOL it down; RINSE the funnel and digestion tube wall. 3.1.4.3 Treatment of sample containing amide nitrogen and ammonium nitrogen WEIGH the sample containing nitrogen of about 100 mg (accurate to 0.0002 g) into the digestion tube; USE a small amount of water to wash the tube wall; PLACE the digestion tube in a ventilation cabinet; ADD 10 mL of sulfuric acid and 0.5 g of mixed catalyst; INSERT the pear-shaped glass funnel; HEAT it for 1 h in the digestion furnace at 340 °C; PAY attention to avoid drying it; COOL it down; RINSE the funnel and digestion tube wall. 3.1.4.4 Treatment of sample containing nitrate nitrogen and amide nitrogen WEIGH the sample of total nitrogen content of about 100 mg and nitrate nitrogen content of less than 25 mg (accurate to 0.0002 g) in the digestion tube; ADD 0.5 g of chromium powder; USE a small amount of water to wash the tube wall; PLACE the digestion tube in a ventilation cabinet; ADD 5 mL of hydrochloric acid in the digestion tube; LET it stand at room temperature for at least 5 min, (BUT not exceeding 10 min). PLACE the digestion tube in the digestion furnace which has been heated to 300 °C in advance; INSERT in the pear-shaped glass funnel; HEAT to boil it for 1 min ~ 2 min; PAY attention to avoid drying it; COOL it down; carefully ADD 10 mL sulfuric acid and 0.5 g of mixed catalyst; PLACE it into the digestion furnace again; INCREASE the temperature to 340 °C; HEAT it until the solution color changes into purple; PAY attention to avoid drying it; COOL it down; RINSE the funnel and digestion tube wall. 3.1.4.5 Treatment of organic-inorganic compound fertilizer sample containing no nitrate nitrogen WEIGH the sample containing nitrogen of about 100 mg (accurate to 0.0002 g) into the digestion tube which had been dried in advance; PLACE the digestion tube into the ventilation cabinet; ADD 10 mL of sulfuric acid and 0.5 g of mixed catalyst; INSERT the pear-shaped glass funnel; LET it stand for 10 min; PLACE the digestion tube over the digestion furnace to slowly heat it (if the reaction is intense to produce too much foam, MOVE it away from the digestion tube to cool it down for a moment); after the intense reaction finishes, INCREASE the temperature of the digestion furnace to 340 °C to continue digestion, until the solution is colorless or in light color. PAY attention to avoid drying it; COOL it down; RINSE the funnel and digestion tube wall. 3.2.1.3.2 Automatic digestion furnace, the temperature can be controlled within the range of 340 °C ± 5 °C; 3.2.1.3.3 Electric heating plate, the power is about 1.8 kW ~ 2.4 kW; 3.2.1.3.4 Digestion tube, the volume is about 350 mL; 3.2.1.3.5 Flow analyzer, it has the ammonium nitrogen channel and automatic injection device, with the ammonium nitrogen detection lower limit of 0.2 mg/L. 3.2.1.4 Preparation of sample solution MAKE parallel determinations against two set of materials. PREPARE laboratory samples in accordance with the corresponding product standards. 3.2.1.4.1 Treatment of sample containing ammonium nitrogen only. WEIGH the sample containing about 100 mg of nitrogen (accurate to 0.0002 g) into a 250-mL conical flask; ADD about 100 mL of water and 5 mL of sulfuric acid; HEAT to boil it for 15 min; COOL it down; quantitatively TRANSFER it to a 250-mL volumetric flask; USE water to dilute it to the mark; MIX it uniformly; dry FILTER it; DISCARD the initial filtrate. 3.2.1.4.2 Treatment of sampling containing amide nitrogen and ammonium nitrogen. Treatment of sample containing ammonium nitrogen only. WEIGH the sample containing about 100 mg of nitrogen (accurate to 0.0002 g) into a digestion tube; USE a small amount of water to rinse the tube wall; PLACE the digestion tube into the ventilation cabinet; ADD 5 mL of sulfuric acid; PLACE the digestion tube on the digestion furnace; HEAT it at 340 °C for 1 h; quantitatively TRANSFER it to a 250 mL volumetric flask; USE water to dilute it to the mark; MIX it uniformly; dry FILTER it; DISCARD the initial filtrate. 3.2.1.4.3 Preparation of blank solution. except for not adding sample, the rest procedures are same as the preparation of sample solution. 3.2.1.5 Analytical procedures 3.2.1.5.1 Drawing of working curves PIPETTE 0 mL, 0.5 mL, 1.0 mL, 2.0 mL and 4.0 mL of ammonium nitrogen (NH4+-N) standard solution respectively into five 100 mL volumetric flask; USE the corresponding blank solution to dilute it to the mark; MIX it uniformly. AND the concentrations of this standard solution are 0, 50 mg/L, 100 mg/L, 200 mg/L, and 400 mg/L, respectively. Before making the determination, with reference to the instrument instruction manual, SELECT the best working parameters. Then, PLACE the solution sucker of the flow analyzer into the buffer solution, sodium salicylate solution, and dichloroisocyanic acid solution respectively. At PREPARE laboratory samples in accordance with the corresponding product standards. WEIGH the sample contain the nitrate nitrogen of about 50 mg (accurate to 0.0002 g); PLACE it into a 250mL-conical flask; ADD about 100 mL of water; HEAT to boil it for 15 min; COOL it down; quantitatively TRANSFER it to a 250-mL volumetric flask; USE water to dilute it to the mark; MIX uniformly; dry FILTER it; DISCARD the initial part of the filtrate. Preparation of blank solution. except for not adding sample, the rest procedures are same as the preparation of sample solution. 3.2.2.5 Analytical procedures 3.2.2.5.1 Drawing of working curves PIPETTE 0 mL, 1.0 mL, 2.0 mL, 4.0 mL, and 8.0 mL of nitrate nitrogen... ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 22923-2008 be delivered?Answer: The full copy PDF of English version of GB/T 22923-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 22923-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22923-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 22923-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 22923-2008?

A step-by-step guide to download PDF of GB/T 22923-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 22923-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9