GB/T 22793.2-2008 English PDFUS$514.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22793.2-2008: Furniture -- Children high chair -- Part 2: Test methods Status: Obsolete
Basic dataStandard ID: GB/T 22793.2-2008 (GB/T22793.2-2008)Description (Translated English): Furniture -- Children high chair -- Part 2: Test methods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y81 Classification of International Standard: 97.140 Word Count Estimation: 13,123 Date of Issue: 2008-12-30 Date of Implementation: 2009-09-01 Adopted Standard: ISO 9221-2-1992, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.25 (Total No.138) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the assessment GB 22793. 1-2008 " furniture, children's high chairs-Part 1: Safety requirements" Test Methods Children's high chairs and multi-functional chair safety requirements. This section does not apply to variable replaced by low chairs, low chairs and low tables and racks with baby steps, push chair, additional features cars reclining chairs and a low chair high chair, rocking chair. This section describes the different parts of the high chair in a simulated normal use and reasonably foreseeable range of load test when misused. The trial was designed to evaluate the performance of the product, does not consider the material, design/construction or manufacturing process. This test is designed to apply to have assembled and ready for use product. The test results valid only for the tested samples. When the test results to be used for other similar products, the sample should be representative of such products. If the design of the structure of the specimen is not suitable for the standard test procedure, the test should be carried out in accordance with the procedures as specified in this standard, and pointed out that the list of differences between the provisions of the program. GB/T 22793.2-2008: Furniture -- Children high chair -- Part 2: Test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.. Furniture Children's high chair Part 2. Test methods ICS 97.140 Y81 National Standards of People's Republic of China GB/T 22793.2-2008/ISO 9221-2.1992 Furniture - High chairs - Part 2. Test methods (ISO 9221-2.1992, IDT) Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 1 General test requirements 4 Test apparatus 1 5 Test Procedure 3 6 Test reports 7 Appendix A (normative) visual inspection method 9 GB/T 22793.2-2008/ISO 9221-2.1992ForewordGB 22793 "Children's furniture, high chair" is divided into two parts. --- GB 22793.1 "Furniture - High chairs - Part 1. Safety requirements"; --- GB/T 22793.2 "Furniture - High chairs - Part 2. Test methods." This is part of the GB Part 222 793. This part identical with ISO 9221-2.1992 "Children's furniture, high chairs - Part 2. Test methods" with the original technology of international standards The content and structure of the text is identical, only to do the following editorial changes. --- Provisions "Normative references" in the introductory phrase by GB/T 1.1-2000 of; --- Use the decimal symbol instead of decimal symbol ",". ","; --- Use the "standard" instead of "this International Standard" by "this part of the standard" instead of "this part of this International Standard"; --- Delete international standards informative overview of elements (including the cover, directory, foreword and introduction); --- Added Appendix A (normative). This section of Appendix A normative appendix. This part is proposed by the China National Light Industry Council. This part of the furniture by the National Standardization Center centralized. This part mainly drafted by. Shanghai Institute of Quality Supervision, Inspection, Zhejiang Fangyuan Test Group Co., Ltd., Chengdu All Friends Furniture Co., Ltd., Dongguan City, Guangdong Province Quality and Technology Supervision of standards and codes, Shunde Standardization Research and Promotion Center. The main drafters of this section. Luoju Fen, Liu Yao country, beam Mega, the ancient Ming, Yu Fei Biao, Zhang Friends of the whole, Luo Yuetai, Yang Yining, Chen Bingfu. GB/T 22793.2-2008/ISO 9221-2.1992 Furniture - High chairs - Part 2. Test methods1 ScopeGB 22793 provisions of this part of the assessment of GB 22793.1-2008 "Furniture - High chairs - Part 1. Safety requirements" in the home Test methods for children and high chair multifunctional chair with safety requirements. This section does not apply to variable into low chairs, low chairs and a low infant and toddler having rack, push chairs, rocking chair, car seat and reclining chairs low Additional features high chair. This section describes the different parts of the high chair simulate normal use and reasonably foreseeable series of loading tests of misuse. These tests are designed to evaluate the performance of the product, does not consider the materials, design/construction or manufacturing processes. This test applies to design already assembled and ready for use product. The test results only test sample is valid. When the test results to be used for other similar products, the sample should be representative of such products. If the design of the structure of the specimen is not suitable for this standard test procedure, the test shall be conducted in accordance with the procedures as specified in this standard, and List indicates the difference with a predetermined program.2 Normative referencesThe following documents contain provisions which, through reference in this section GB 22793, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 22793.1-2008 furniture Children's high chairs - Part 1. Safety requirements (ISO 9221-1.1992, IDT) Standard environmental norms ISO 554 and quenching test ISO 2812-2 Paints and varnishes - Determination of resistance to liquid Part 2. Water immersion method ISO 4628-3 Paints and varnishes - Evaluation of degradation of coatings defects in the number, size and surface uniformity varying intensities logo Part 3. Rusty level assessment3 General test requirementsUnless otherwise specified, the measuring accuracy of all force value should be ± 0.5%, all mass measurement accuracy shall be ± 0.5%, all sizes Measurement accuracy should be ± 0.5mm. Before the test, the specimen should be stored for some time, in order to ensure a sufficient strength which, if the specimen timber or the like material glued together, After you create a good product after at least four weeks should be stored in a normal indoor environment, it can be tested. Prior to testing, in accordance with ISO 554, the specimen should be placed in a temperature of (23 ± 2) ℃, relative humidity of (50 ± 5)% of the standard ring Habitat in storage for at least a week. High chairs should deliver state tests for demountable, should be assembled according to the instructions delivered with the high chair. If the high chair has a different Assembly or a combination of the way, for each trial, should be the most unfavorable combination of ways. Before the test, removable hardware should be tightened. If the high chair structure with an angle adjustable backrest, all the strength and stability of the test should be back in the most unfavorable position were, Usually the backrest is fully reclining.4 Test Equipment4.1 Test Module A diameter of 200mm, 300mm high rigid cylinder, the quality of 15kg, 150mm above the center of gravity is located at the bottom, GB/T 22793.2-2008/ISO 9221-2.1992 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22793.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22793.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22793.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22793.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
