GB/T 22308-2008 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22308-2008: Standard test method for density of a sheet gasket material
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22308-2008	114	Add to Cart	3 days	Standard test method for density of a sheet gasket material	Valid

Similar standards

GB/T 24498   GB/T 14683   GB/T 13477.9   GB/T 13477.25   GB/T 22307   

Basic data

Standard ID: GB/T 22308-2008 (GB/T22308-2008)
Description (Translated English): Standard test method for density of a sheet gasket material
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q24
Classification of International Standard: 23.040.80
Word Count Estimation: 6,667
Date of Issue: 2008-08-20
Date of Implementation: 2009-04-01
Quoted Standard: GB/T 20671.1; ASTM E691
Adopted Standard: ASTM F1315-2000 (2006), IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies test methods gasket material density.

GB/T 22308-2008: Standard test method for density of a sheet gasket material

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for density of a sheet gasket material ICS 23.040.80 Q24 National Standards of People's Republic of China Sealing plate material density test method Posted 2008-08-20 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with the American Society for Testing Materials ASTM F1315-00 (2006 confirmation) "sealing plate material density test method". This standard is equivalent translation ASTMF1315-00 (2006 confirmed). Compared with ASTMF1315-00 (2006 confirmation), this standard the following modifications. --- Remove the first 1.2 "values \u200b\u200bgiven in parentheses are for reference only" the last sentence; --- Chapter 2, with the title "Normative References" instead of "reference", and added the introductory phrase; reference file directory with Chinese State Home Standard "GB/T 20671.1" instead of the American Society for Testing Materials ASTM standard "F104", the standard text accordingly Were substitution; --- Remove the British units and the value of all given in parentheses. The standard proposed by China Building Materials Federation. The standard and non-metallic mineral products by the National Standardization Technical Committee (SAC/TC406) centralized. This standard is drafted by. Xianyang Institute of non-metallic minerals. Participated in the drafting of this standard. Zhoushan seamounts sealed Material Co., Ltd., Chengdu Tianfu Gasket Co., Ltd., Chengdu-Jun Ma secret Feng Products Co., Ltd., Hebei Hengda Sealing Materials Co., Ltd., Jilin Province Haihong seal products. The main drafters of this standard. HEZE Shizhong Tang, Sketch, IRON, Fan Guoliang, Li Baojin, Sink Mark. This standard is the first release. Sealing plate material density test method

1 Scope

1.1 standard specifies the test methods gasket material density. 1.2 is the standard in International System of Units (SI) units. 1.3 standard does not address safety issues associated with their use. Responsibility of the user of this standard to consider health and safety issues, and the use of Regulatory limitations prior to determining the scope of application.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 20671.1 Non-metallic gasket materials Classification system and test methods - Part 1. Non-metallic gasket materials classification system ASTME691 laboratory test to determine the precision of the method of work instructions

3 Summary of Test Method

The die-cut samples were adjusted to measure the thickness, quality and size, then calculated and reported density. 4. Significance and Use 4.1 density is an important characteristic of the gasket material, and is inversely proportional to the volume of the material. Density commonly used in the specification associated therewith Tightness, compressibility, creep relaxation and tensile strength used to describe a grade gasket material. 4.2 is the ratio of the density of mass and volume, the balance and hence the thickness measuring device easily measured. To achieve high accuracy Scales, this method of test samples were adjusted 1h ~ 2d, but as a method for testing the product will reduce its effectiveness. If used Production monitoring is recommended in strict accordance with the thickness and quality of the measurement method.

5 Interference

Most pads because of damp sample mass increase and causing the material to expand. The right to adjust the sample to be controlled changes in humidity.

6 Test Equipment

With a thickness of 6.1 --- driven by its own weight load measuring device to measure the thickness, the specific requirements of Table 1. The device should be capable of measuring the thickness indication 1%. Indenter diameter should be 6.40mm ± 0.13mm. Anvil diameter greater than the diameter of the head. Table 1 applied pressure Model Material (The first six digital code base, see GB/T 20671.1) Pressure on the sample / kPa Indenter total pressure (reference) / 1,5 or 7 80.3 ± 6.9 2.50 2 or 4 35 ± 6.9 1.11 3 55 ± 6.9 1.75 0 and 9a 55 ± 6.9 1.75 Unless a drawing on other supplementary documents or where otherwise indicated. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22308-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22308-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22308-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22308-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.