GB/T 13477.25-2024 English PDFUS$369.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13477.25-2024: Test method for building sealants - Part 25: Determination of resistance to mold Status: Valid
Basic dataStandard ID: GB/T 13477.25-2024 (GB/T13477.25-2024)Description (Translated English): Test method for building sealants - Part 25: Determination of resistance to mold Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q24 Classification of International Standard: 91.100.50 Word Count Estimation: 18,132 Date of Issue: 2024-09-29 Date of Implementation: 2025-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 13477.25-2024: Test method for building sealants - Part 25: Determination of resistance to mold---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standard of the People's Republic of China ICS 91.100.50CCS Q 24 Test methods for building sealing materials Part 25.Determination of resistance to fungi Test method for building sealants- Part 25.Determination of resistance to mold 2024-09-29 Release 2025-04-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document is part 25 of GB/T 13477 Test methods for building sealing materials. GB/T 13477 has been published for the following part. -- Part 1.Requirements for test substrates; --Part 2.Determination of density; -- Part 3.Method for determining the extrudability of sealing materials using standard equipment; -- Part 4.Determination of extrudability of original packaging single-component sealing materials; -- Part 5.Determination of surface drying time; -- Part 6.Determination of fluidity; -- Part 7.Determination of low temperature flexibility; -- Part 8.Determination of tensile adhesion; -- Part 9.Determination of tensile adhesion after immersion in water; -- Part 10.Determination of fixed-stretch adhesion; -- Part 11.Determination of tensile adhesion after immersion in water; -- Part 12.Determination of adhesion after tension-compression cycles at the same temperature; -- Part 13.Determination of adhesion after cold drawing and hot pressing; -- Part 14.Determination of adhesion after immersion in water and tension-compression cycling; -- Part 15.Determination of adhesion after exposure to heat, artificial light through glass and water; -- Part 16.Determination of compression properties; -- Part 17.Determination of elastic recovery; -- Part 18.Determination of peel adhesion; -- Part 19.Determination of mass and volume change; --Part 20.Determination of contamination; -- Part 21.Determination of color change after artificial accelerated weathering; -- Part 22.Determination of curing characteristics; -- Part 23.Determination of durability after tension-compression cycles under artificial accelerated weathering; -- Part 25.Determination of resistance to fungi. Please note that some of the contents in this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Building Materials Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lightweight and Decorative Building Materials (SAC/TC 195). This document was drafted by. Shanghai Jianke Inspection Co., Ltd., Zhengzhou Zhongyuan Silande Hi-Tech Co., Ltd., Guangzhou Baiyun Technology Co., Ltd. Co., Ltd., Shenzhen Feiyang Junyan New Materials Co., Ltd., Kejian Polymer Materials (Shanghai) Co., Ltd., Hubei Tongcheng High-tech Materials Co., Ltd., Hebei Carpoly Coatings Co., Ltd., Meichao Group Co., Ltd., Chengdu Guibao Technology Co., Ltd., Henkel Adhesives Co., Ltd., Guangzhou Jitai Chemical Co., Ltd., Shandong Yulong Polymer Technology Co., Ltd., Gelianghao New Materials Co., Ltd., Keshun Waterproof Technology Co., Ltd., Sunlais (Shanghai) New Materials Co., Ltd., Gunuo (Tianjin) Industrial Co., Ltd., Zhejiang Xin'an Chemical Group Co., Ltd., Jiangsu Ruiyang Antai New Materials Technology Co., Ltd., Sunstar (Guangzhou) Chemical Co., Ltd., JCDecaux (Guangzhou) Building Materials Co., Ltd., Jiangxi Lanxing Xinghuo Silicone Co., Ltd., China Construction Southwest Design Institute Co., Ltd., Shanghai Niuyuan Industry and Trade Co., Ltd. Shanghai Duyu New Materials Technology Co., Ltd., Qingdao Lida Chemical Co., Ltd., Carbon Technology Group Co., Ltd., Guangdong Science and Technology Group Co., Ltd. Institute of Microbiology, Guangdong Provincial Microbiological Analysis and Testing Center, Jiangsu Kexing New Materials Co., Ltd., Hubei Junbang New Materials Technology Co., Ltd. Company, Hubei Yuhong Xingfa New Materials Co., Ltd., Dongguan Shanli Polymer Materials Research Co., Ltd., Hanning Chemical (Shanghai) Co., Ltd. Company, Guangdong Dimei Biotechnology Co., Ltd., Hangzhou Saiken New Materials Technology Co., Ltd., Shandong Wosai New Materials Technology Co., Ltd., Hangzhou Zhijiang Organic Silicone Chemical Co., Ltd., Shanghai Changken Testing Equipment (Group) Co., Ltd., Jiangsu Kailun Building Materials Co., Ltd., Sino-German Xinya Building Materials Co., Ltd., LANXESS Chemical (China) Co., Ltd., MCC Testing and Certification Co., Ltd., Shanghai Jianke Environmental Technology Co., Ltd., Jialifeng Technology Co., Ltd. and Sankeshu Paint Co., Ltd. The main drafters of this document are. Hu Xiaozhen, Zhang Yanhong, Niu Rong, Xu Yanhua, Zhu Longhui, Xie Xiaobao, Zou Mingxuan, Cao Lihua, Xiang Hua, Ye Caiping, Yi Lijiao, Xie Lin, Shi Wei, You Shuming, Qiao Xuedong, Gao Jue, Gong Xingyu, Zhang Lunsheng, Zhang Xiaochuan, Tan Li, Zhang Yaxian, Yuan Jialin, Li Bin, Dong Fengliang, Wang Hui, Xue Runze, Miao Ce, Yin Bingli, Wu Jinqin, Yang Liyan, Zhang Xiangqin, Li Jianfeng, Luo Shigang, Cai D, Zhang Xiancheng, Bi Shiming, Luo Weixiong, Liu Yonglong, Xu Mengxiang, Wang Tao, Zhang Yanqing, Xue Jun, Shen Yiyao, Wu Xuyan, Chen Bin, Wang Zhiang, Zhao Yu, Fan Na, and Wang Donghui.IntroductionBuilding sealing materials are a type of functional building materials that can withstand joint displacement to achieve airtightness and watertightness and are embedded in building joints. Materials are of great significance to improving the sealing, energy saving, waterproofing, sound insulation, and dustproofing of buildings. In response to the national priority development of new waterproof The planning outline requirements of water sealing materials, standardizing product quality, and guiding the healthy and orderly development of the product market, from the 1980s to the present, we China has gradually established a relatively complete standard system for building sealing materials. GB/T 13477 "Test methods for building sealing materials" is a standard for building sealing materials. The important components of the material standard system are mainly based on the international standard system documents corresponding to ISO /TC 59/SC 8, which have been issued and implemented. 24 sections. GB/T 13477 is a basic and universal test method standard for the performance testing of sealants used in construction and civil engineering in my country. GB/T 13477 is divided into 5 categories, which are classified into the following categories. The implementation consists of the following parts. --Test conditions (Part 1), which specifies the test substrate and other conditions; -- Construction performance category (Part 3~Part 6, Part 22), specifies the extrusion, application period, surface drying time, flow Determination methods of properties, curing characteristics, etc. --Physical/mechanical properties (Part 2, Part 7, Part 16, Part 17, Part 19), specifying the product's Determination methods of strength, low temperature flexibility, compression characteristics, elastic recovery rate, mass and volume changes, etc. -- Adhesion performance with substrate (Part 8 to Part 14, Part 18), which specifies the tensile adhesion and fixed extension adhesion of the product Determination methods of adhesion, adhesion after immersion in water, adhesion after tension-compression, peeling adhesion, and adhesion after high/low temperature treatment; -- Durability/aesthetics (Part 15, Part 20, Part 21, Part 23, Part 25), which specifies the durability of the product. Methods for determining weather aging, pollution, dust accumulation, appearance changes, and mildew resistance. This document is part 25 of GB/T 13477, belonging to the durability/aesthetics category, and gives the mildew resistance of sealants used in construction and civil engineering. The method for determining fungal resistance provides a reliable basis for selecting and evaluating the fungal resistance level of sealants, which is conducive to eliminating technical trade barriers and Better promote trade, exchanges and technological cooperation. Test methods for building sealing materials Part 25.Determination of resistance to fungi Warning. People who use this document should have practical experience in regular laboratory work. This document does not point out all possible safety issues. The user is responsible for taking appropriate safety and health measures and ensuring compliance with the conditions stipulated by relevant national laws and regulations.1 ScopeThis document describes the test principle, test conditions, test apparatus and materials, culture medium and test method for determining the mildew resistance of building sealants. reagents, specimen preparation, test procedures, result evaluation and test reports. This document is applicable to the determination of the mildew resistance of sealants used in construction and civil engineering, the mildew resistance of other sealing materials or joint materials Please refer to this document.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 6682-2008 Specifications and test methods for water used in analytical laboratories GB/T 19258.1-2022 Ultraviolet radiation sources for germicidal use Part 1.Low-pressure mercury vapor discharge lamps YY 0569 Class II Biological Safety Cabinet3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Building sealant A material that is embedded in the joints of buildings and civil engineering in a non-formed state and seals the joints by bonding to the joint surfaces. [Source. GB/T 14682-2006, 2.1.3, modified] 3.2 mold Filamentous fungi usually refer to fungi with well-developed mycelium that do not produce fleshy fruiting body structures. Note. The mold body is composed of vegetative hyphae and aerial hyphae. When some aerial hyphae develop to a certain stage, they differentiate into reproductive hyphae and produce mold spores. [Source. GB/T 35469-2017, 3.1, modified] 3.3 Resistance to mold The ability to tolerate, prevent or inhibit the growth and reproduction of mold spores and mycelium. [Source. GB/T 1741-2020, 3.1] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13477.25-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 13477.25-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13477.25-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13477.25-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
