GB/T 22237-2008 English PDFUS$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22237-2008: Surface active agents -- Determination of surface tension Status: Valid
Basic dataStandard ID: GB/T 22237-2008 (GB/T22237-2008)Description (Translated English): Surface active agents -- Determination of surface tension Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300; 71.100.40 Word Count Estimation: 12,115 Date of Issue: 2008-06-19 Date of Implementation: 2008-09-01 Quoted Standard: ISO 304-1985 Adopted Standard: BS EN 14370-2004, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the particular liquid surfactant solution surface tension method. This standard applies to the determination of static surface tension of liquid, such as inorganic or organic liquids and solutions. GB/T 22237-2008: Surface active agents -- Determination of surface tension---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Surface active agents. Determination of surface tension ICS 13.300; 71.100.40 A80 National Standards of People's Republic of China Determination of the surface tension of the surfactant Posted 2008-06-19 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is equivalent to using BSEN14370.2004 "Determination of surfactants --- surface tension" (in English). For ease of use, this standard made the following editorial changes. a) delete the original standard foreword and introduction; b) delete the original standard directory; c) with a decimal point '. 'Instead of as a decimal comma', '. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard was drafted. the Chemical Institute of Standardization, Jiangsu CIQ. The main drafters of this standard. Tang Lijun, Wang Xiaobing, Liu Junfeng, Mei Jian, Chen, Zhou Wei, Wang Hongsong, Xi Zhang Jun, Wang Rong. This standard is the first release. Determination of the surface tension of the surfactant1 ScopeThis standard specifies the liquid surface, especially a surfactant solution Determination of tension. This standard applies to the determination of static surface tension of liquid, such as inorganic or organic liquids and solutions.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 304. 1985 Determination of the surface tension of the detergent --- --- ring up liquid films Principle 3 3.1 Measurement and perpendicular to the liquid in contact and are completely wetted flat surface tension F (static method) or measuring the level of a suspension stirrup Ring-shaped objects or pull the liquid surface desired surface tension F (class static method), see reference [1] and [2]. By surface tension The formula is calculated, see Chapter 8. 3.2 In the static method, to ensure that the plate is in a fixed state in order to get a balance. Class static method needs to be moved during the measurement process stirrup Or ring-shaped objects, so the measurement process by a very small and slow moving stirrup or ring-shaped objects will deviate from the equilibrium level Minimized.4 Instrument4.1 tonometer Tonometer be based on experiments in flat, stirrup or ring was designed, generally consists of the following major components. Small horizontal platform a) for supporting a sample container, and the platform can be moved up and down, as measured by a micrometer spiral move up and down. b) means for measuring flat, stirrup-shaped objects or means on the force generated by the ring. Uncertainty of measurement must not exceed ± 10-6N, The maximum relative mass measurement error ± 0.1mg. NOTE. You can use a steelyard or an electronic balance (laboratory balances, analytical balance or microbalance) instead of the torsion balance. In order to obtain greater efficiency and Repeatability can be used with a balance, automatic lifting automatic tension meter platform and evaluation device. 4.2 Tablet Flat sheet or by platinum platinum/iridium sheet is made, about 20mm long, 0.2mm thick, 10mm high and the surface should be at least to mention rough It is high wetting effect. NOTE. To achieve the desired effect of the rough, you can use sandblast, emery grinding. We need to become flat as the center axis of the suspension one o'clock, and the effective height of at least 10mm to minimize wetting errors, as shown in Figure 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22237-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22237-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22237-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22237-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
