GB/T 21862.2-2008 English PDF

US$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21862.2-2008: Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 21862.2-2008	174	Add to Cart	3 days	Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method	Valid

Similar standards

GB/T 21617   GB 23350   GB/T 21622   GB/T 21862.5   GB/T 21844   GB/T 21862.4   

Basic data

Standard ID: GB/T 21862.2-2008 (GB/T21862.2-2008)
Description (Translated English): Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A80
Classification of International Standard: 13.300
Word Count Estimation: 9,997
Date of Issue: 2008-05-12
Date of Implementation: 2008-09-01
Quoted Standard: GB/T 3186-2006; GB/T 20777-2006
Adopted Standard: ISO 2811-2-1997, IDT
Regulation (derived from): Announcement of Newly Approved National Standards 2008 No. 8 (No. 121 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the falling ball method for the determination paints, varnishes and related products density approach. This section applies to low or medium viscosity adhesive material suitable for production process control.

GB/T 21862.2-2008: Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Paints and varnishes Determination of densit Part 2. Immersed body (plummet) method ICS 13.300 A80 National Standards of People's Republic of China GB/T 21862.2-2008/ISO 2811-2.1997 Paints and varnishes - Determination of density Part 2. Falling Ball Method (ISO 2811-2.1997, IDT) Posted 2008-05-12 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 21862 "Paints and varnishes - Determination of density" includes the following four parts. --- Part 2. Falling Ball Method; --- Part 3. vibration method; --- Part 4. Pressure cup method; --- Part 5. hydrometer method. This is Part 2 GB/T 21862 of. This section is equivalent to using the ISO 2811-2.1997 "Paints and varnishes - Determination of density - Part 2. Falling Ball Method" (in English). This part of ISO 2811-2.1997 compared to do the following editorial changes. --- With "this Part" instead of "ISO 2811 part of this"; --- Use has been tantamount to the adoption of national standards instead of into the corresponding international standards or foreign standards; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete international standards foreword. GB/T 21862 "Paints and varnishes - Determination of density," the relevant standards. GB/T 6750-2007 test "Paints and varnishes density Given pycnometer method "(ISO 2811-1.1997, IDT). Appendix A of this section is normative appendix, Appendix B is an informative annex. This part of the National Chemicals Management Standardization Technical Committee dangerous (SAC/TC251) and focal points. This section is responsible for drafting. Jiangsu Entry-Exit Inspection and Quarantine Bureau. Participated in the drafting of this section. the Chemical Institute of Standardization, Marine Chemicals Research Institute, China National Chemical Construction Corporation of Changzhou coating Power Research Institute. The main drafters of this section. Suppliers expensive celery, Mei Jian, He Songtao, WANG Gui-rong, Zhu Yan, Pan Shenglin, Zhao Ling. This section is the first release. GB/T 21862.2-2008/ISO 2811-2.1997 Paints and varnishes - Determination of density Part 2. Falling Ball Method

1 Scope

This section provides the falling ball method Paints, varnishes and related products density method. This section applies to low or medium viscosity adhesive material suitable for production process control.

2 Normative references

The following documents contain provisions which, through reference GB/T 21862 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT) GB/T 20777-2006 Paints and varnishes examination and preparation of samples (ISO 1513.1992, IDT)

3 Terms and Definitions

The following terms and definitions apply to this section. 3.1 The ratio of material quality and volume, expressed in grams per milliliter (g/mL). Principle 4 This method is based on Archimedes' principle. In the test, to a container placed on the balance, a certain volume of the sample is loaded, the Safety Mounted on a tripod falling ball immersed in the test sample, before and after recording falling ball submerged balance readings. Density of the sample by the falling ball before immersion After the balance reading is calculated.

5 Temperature

5.1 relative filling properties, the effect of temperature on the density is large, and with the product type. 5.2 part of the provisions of 23 ℃ ± 0.5 ℃ as the standard temperature. In some specific cases, use other identification such as temperature measurement 20 ℃ ± 0.5 ℃ (see Appendix B). 5.3 Throughout the test, the sample and falling ball should remain at a particular temperature, and should ensure that throughout the test, The change in temperature of no more than 0.5 ℃.

6 Instruments

Routine laboratory equipment and glassware and the following instruments. Falling Ball 6.1 It made of corrosion-resistant metals, such as copper and zinc alloy (brass), stainless steel or aluminum, the shape shown in Figure 1. Figure 1 volume drop ball Can 10mL or 100mL. Each ball drop should show its volume, standard temperature reference liquid surface tension and density of concrete GB/T 21862.2-2008/ISO 2811-2.1997 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21862.2-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21862.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21862.2-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21862.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.