GB/T 21629-2008 English PDFUS$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21629-2008: Dangerous goods -- Bullet impact test method of division 1.6 article Status: Valid
Basic dataStandard ID: GB/T 21629-2008 (GB/T21629-2008)Description (Translated English): Dangerous goods -- Bullet impact test method of division 1.6 article Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300 Word Count Estimation: 5,519 Date of Issue: 2008-04-01 Date of Implementation: 2008-09-01 Adopted Standard: UNECE ST/SG/AC.10/11, NEQ Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the dangerous goods 1. 6 The principle of the method bullet impact test, test equipment, test procedures and results are shown. This standard applies to dangerous goods 1. 6 items tested. GB/T 21629-2008: Dangerous goods -- Bullet impact test method of division 1.6 article---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dangerous goods. Bullet impact test method of division 1.6 article ICS 13.300 A80 National Standards of People's Republic of China Dangerous goods 1.6 Bullet impact test method Posted 2008-04-01 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis corresponds to the standard of the United Nations "on the Recommendations on the Transport of Dangerous Goods. Manual of Tests and Criteria" (fourth revised edition), its consistency Cheng Degree is not equivalent. Its technical content and said full agreement on a standard text format according to GB/T 1.1-2000 done editing Modifications. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard is drafted by. Jiangxi CIQ. Participated in the drafting of this standard. the Chemical Institute of Standardization. The main drafters of this standard. Huang Lili, Mei Jian, Boyan Gang, Yang Chunhua, Wang Xiaobing, Guo Ping, Zhang Jun Xi. This standard was first formulated. Dangerous goods 1.6 Bullet impact test method1 ScopeThis standard specifies the method of dangerous goods 1.6 Principle bullet impact test items, test equipment, test procedures and results are shown. This standard applies to dangerous goods 1.6 test items.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 19455 civilian explosives inspection of hazardous properties of dangerous goods safety regulations GB 19458 safety inspection of hazardous properties of dangerous goods - General specifications United Nations "on the Recommendations on the Transport of Dangerous Goods. Model Regulations" (fourteenth revised edition)3 Terms and DefinitionsGB 19455, GB 19458, the United Nations' Recommendations on the Transport of Dangerous Goods. Model Regulations "(fourteenth revised edition) established the following The terms and definitions apply to this standard. 3.1 All substances or articles simultaneously explode. 3.2 In a very short time, releasing large amounts of energy to produce heat, and emit large amounts of gas, causing a chemical reaction in the surrounding pressure or status change The phenomenon. 3.3 The extremely low-mass explosion hazard insensitive articles. This item includes contain only extremely insensitive detonating substances and cause an explosion or accidental The probability of the spread of negligible items. 3.4 Solid or liquid material, under external action (such as heat, pressure, impact, etc.) can be dramatic chemical reactions, produce large amounts of gas instantaneous And body heat, so that a sharp rise in pressure around the explosion, causing damage to the surrounding environment of items, including no mass explosion hazard, with burning Burning, projectile and less dangerous explosives.4 principle of the methodThe reaction by the transfer of kinetic energy to impact and penetration test items for specific energy generated to determine whether it is 1.6 items.5 Test Equipment5.1 Bullet Standard 12.7mm armor-piercing projectile weight 0.046kg. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21629-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21629-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21629-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21629-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
