GB/T 21612-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21612-2008: Dangerous goods -- Test method of self-heating for flammable solids Status: Valid
Basic dataStandard ID: GB/T 21612-2008 (GB/T21612-2008)Description (Translated English): Dangerous goods -- Test method of self-heating for flammable solids Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300 Word Count Estimation: 5,524 Date of Issue: 2008-04-01 Date of Implementation: 2008-09-01 Quoted Standard: UNITAR ST/SG/AC.10/1, UNECE ST/SG/AC.10/11 Adopted Standard: UNITAR ST/SG/AC.10/1, UNECE ST/SG/AC.10/11, NEQ Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the dangerous flammable solids from the thermal test equipment, test procedures and test reports. This standard applies to flammable solids of dangerous goods carried out self-heating test measures. GB/T 21612-2008: Dangerous goods -- Test method of self-heating for flammable solids---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dangerous goods. Test method of self heating for flammable solids ICS 13.300 A80 National Standards of People's Republic of China Flammable solid dangerous self-heating test method Posted 2008-04-01 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis corresponds to the standard of the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "was built on the Transport of Dangerous Goods Recommendations Manual of Tests and Criteria ", with its non-equivalent. Its technical content and said full agreement in the standard text The present format press GB/T 1.1-2000 made editorial changes. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard is drafted by. Tianjin Inspection and Quarantine Institute of Science and Technology. Participated in the drafting of this standard. Jiangnan University, the Chemical Institute of Standardization, Tianjin CIQ. The main drafters of this standard. Wangli Bing, Lining Tao, Zhao Qing, Li Xue Yang, Wang Xiaobing, Zhou Lei. This standard is the first release. Flammable solid dangerous self-heating test method1 ScopeThis standard specifies the equipment, test procedures and test reports dangerous flammable solids self-heating test. This standard applies to dangerous flammable solid, self-heating test measures.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" United Nations "on the Recommendations of the Transport of Dangerous Goods Manual of Tests and Criteria"3 Terms and DefinitionsUnited Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations", the United Nations' Recommendations on testing and standard transport of dangerous goods Associate Handbook "and established the following terms and definitions apply to this standard. 3.1 Flammable solids are readily combustible solids which may cause fire or friction solid.4 Test Equipment4.1 Hot air circulation oven, the internal volume greater than 9L, temperature control accuracy of 100 ℃ ± 2 ℃, 120 ℃ ± 2 ℃, 140 ℃ ± 2 ℃. 4.2 cubic side length of 25mm and 100mm of the sample container, made of stainless steel mesh side length of 0.05mm, the open top of the container. Chrome aluminum 4.3 two 0.3mm diameter thermocouple.5 test procedure5.1 powdery or granular material put into the sample test sample container, filled to the rim, and the container tapped several times. As the sample sink, following Continued addition of the sample, the sample piled high after trimming flattened, covering the container with a cover, hanging in the center of the oven. 5.2 two thermocouples were used to measure oven temperature testing center. 5.3 Take a side length of 100mm cube sample at 140 ℃ conditions tested and maintained 24h, continuous record of the sample temperature and the oven temperature. 5.4 Take a side length of 25mm cube sample at 140 ℃ conditions tested and maintained 24h, continuous record of the sample temperature and the oven temperature. 5.5 substance to a volume greater than 0.45m3, less than 3m3 of container transport, take the edge length of 100mm cube 120 ℃ conditions Under test and maintain 24h, continuous record of the sample temperature and the oven temperature. 5.6 substance to be less than 0.45m3 in volume, taking the side length of the test conditions at 100mm cube 100 ℃ and holding 24h, even Continued recording the sample temperature and the oven temperature.6 Test Result Description6.1 If self-heating within 24h test time or the sample temperature is higher than the oven temperature 60 ℃, the test substance is considered as self-heating substances, Recorded as a positive result. Otherwise, record the result is negative. 6.2 Test substances if they meet the following conditions, for the non-material 4.2. a) a negative result is obtained when the test 100mm3 cube sample at 140 ℃; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21612-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21612-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21612-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21612-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |