GB/T 21601-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21601-2008: Dangerous goods -- Test method for bale handle and drop handle strength of packaging Status: Valid
Basic dataStandard ID: GB/T 21601-2008 (GB/T21601-2008)Description (Translated English): Dangerous goods -- Test method for bale handle and drop handle strength of packaging Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300 Word Count Estimation: 5,550 Date of Issue: 2008-04-01 Date of Implementation: 2008-09-01 Quoted Standard: GB/T 13040 Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the steel pail bucket of dangerous goods packaging, put the ring strength test equipment, test procedures and test reports. This standard applies to the opening of dangerous goods to be loaded and closed steel pails steel pails steel pails wrap up its beams, lifting bail strength tests. GB/T 21601-2008: Dangerous goods -- Test method for bale handle and drop handle strength of packaging---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Dangerous goods. Test method for bale handle and drop handle strength of packaging ICS 13.300 A80 National Standards of People's Republic of China Ring strength test method for packaging of dangerous goods Gantry mention Posted 2008-04-01 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis corresponds to the standard of the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations", with its non-equivalent. It has Off the technical content of the above-mentioned full agreement on a standard text format according to GB/T 1.1-2000 made editorial changes. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard is drafted by. Tianjin Inspection and Quarantine Institute of Science and Technology. Participated in the drafting of this standard. Jiangnan University, the Chemical Institute of Standardization, Tianjin CIQ. The main drafters of this standard. Chi Yu Feng, Wangli Bing, Xiongzhong Jiang, Xu came, Wang Xiaobing, Zhao Lihua. This standard was first formulated. Ring strength test method for packaging of dangerous goods Gantry mention1 ScopeThis standard specifies the dangerous goods packaging steel pails Gantry, bails test equipment strength tests, test procedures and test reports. This standard applies to the opening intended to contain dangerous goods in steel pails and steel pails closed its steel pail bucket of packaging, bails strength test.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 13040 metal container packaging terminology3 Terms and DefinitionsGB 13040 and established the following terms and definitions apply to this standard. 3.1 Flat or convex cylindrical container made of metal, fiber, both ends of the plastic, plywood or other suitable material is. 3.2 Smaller capacity containers made of sheet metal, there are two types of sealed and unsealed, generally with tinplate, chrome-plated steel sheet, aluminum, etc. production. 3.3 Plus a handle metal drums, there are two kinds of open and closed. 3.4 One kind of attachment on the container for carrying or gripping. 3.5 On both ends by the mounting brackets attached to the barrel body of semicircular metal handle. 3.6 One kind of the mounting brackets on the tub, you can freely rotate the small loop handle. 3.7 Fixed to the barrel body, can make the same handle as the rotation of the metal hinge connecting member.4 Test Equipment4.1 level suspension. 4.2 deflection testing device (error test device shall be accurate to ± 1mm). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21601-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21601-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21601-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21601-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
