GB/T 21596-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21596-2008: Dangerous goods -- Pressure test method for portable tank Status: Valid
Basic dataStandard ID: GB/T 21596-2008 (GB/T21596-2008)Description (Translated English): Dangerous goods -- Pressure test method for portable tank Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300 Word Count Estimation: 5,524 Date of Issue: 2008-04-01 Date of Implementation: 2008-09-01 Quoted Standard: GB 19454.1; UNITAR ST/SG/AC.10/1 Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the dangerous goods portable tank pressure test equipment, test procedures and test reports. This standard applies to dangerous goods in portable tanks pressure test. GB/T 21596-2008: Dangerous goods -- Pressure test method for portable tank---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dangerous goods. Pressure test method for portable tank ICS 13.300 A80 National Standards of People's Republic of China Dangerous goods in portable tanks Pressure test methods Posted 2008-04-01 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis corresponds to the standard of the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations", with its non-equivalent. It has Off the technical content of the above-mentioned full agreement on a standard text format according to GB/T 1.1-2000 made editorial changes. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard is drafted by. Tianjin Inspection and Quarantine Institute of Science and Technology. Participated in the drafting of this standard. Jiangnan University, the Chemical Institute of Standardization, Tianjin CIQ. The main drafters of this standard. Wangli Bing, Lining Tao, Zhao Qing, Li Xue Yang, Wang Xiaobing, Zhou Lei. This standard is the first release. Dangerous goods in portable tanks Pressure test methods1 ScopeThis standard specifies the test equipment, test procedures and test report dangerous goods portable tank pressure test. This standard applies to dangerous goods in portable tank pressure test.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 19454.1 Dangerous Goods Safety code for inspection of portable tanks General United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations"3 Terms and DefinitionsGB 19454.1 and the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" and established the following terms and definitions apply To this standard. 3.1 Used for the transport of Class 3 to Class 9 substances multimodal tank capacity greater than 450L. Portable tank shell fitted with transport Dangerous goods necessary auxiliary equipment and structural equipment. 3.2 Holds portable tank being transported material portion (the tank itself), including openings and their closures, but does not include service equipment or external junction Device configuration. 3.3 Measuring instruments and filling, discharge, venting, safety, heating, cooling and insulation. 3.4 Pressure values \u200b\u200bused to calculate a recognized pressure vessel code in. Design pressure shall not be less than the maximum pressure of the following persons. The maximum a) at the loading or unloading, allowed in the shell effective gauge pressure; b) the sum of the following three pressures. --- Substance at 65 ℃ (if it is higher than 65 ℃ under high temperature materials in transport, loading, unloading or transport of the highest temperature Degree) absolute vapor substance Yajian 100kPa; --- Air tanks unfilled space and the partial pressure of other gases (kPa), the partial pressure of the space is not filled with the best 65 ℃ Degree) expansion of the liquid caused by the decision; --- In accordance with the direction of twice the maximum permissible gross mass multiplied by the acceleration due to gravity, and the direction perpendicular to the direction of maximum horizontal Permissible gross mass (when the direction is not clear, is twice the maximum permissible gross mass) multiplied by the acceleration due to gravity, hanging up Straight direction maximum permissible gross mass times the acceleration due to gravity, the downward vertical direction twice the maximum permissible gross mass (including ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21596-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21596-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21596-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21596-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
