GB/T 21591-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21591-2008: Dangerous goods -- Test method for tear of intermediate bulk containers (IBCs) Status: Valid
Basic dataStandard ID: GB/T 21591-2008 (GB/T21591-2008)Description (Translated English): Dangerous goods -- Test method for tear of intermediate bulk containers (IBCs) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300 Word Count Estimation: 5,514 Date of Issue: 2008-04-01 Date of Implementation: 2008-09-01 Quoted Standard: GB/T 4122.1; GB 19433.1; GB 19434.1 Adopted Standard: UNITAR ST/SG/AC.10/1, NEQ Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides a flexible intermediate bulk containers of dangerous goods tear test equipment, the number of samples, sample preparation, test procedures and test reports. This standard applies to flexible intermediate bulk containers of dangerous goods tear test. GB/T 21591-2008: Dangerous goods -- Test method for tear of intermediate bulk containers (IBCs)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dangerous goods. Test method for tear of intermediate bulk containers (IBCs) ICS 13.300 A80 National Standards of People's Republic of China Dangerous goods IBC tear test method Posted 2008-04-01 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis corresponds to the standard of the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations", with its non-equivalent. It has Off the technical content of the above-mentioned full agreement on a standard text format according to GB/T 1.1-2000 made editorial changes. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard is drafted by. Tianjin Inspection and Quarantine Institute of Science and Technology. Participated in the drafting of this standard. Jiangnan University, the Chemical Institute of Standardization, Tianjin CIQ. The main drafters of this standard. in Yanjun, Wangli Bing, Xiongzhong Jiang, Xu came, Wang Xiaobing, Zhao Lihua. This standard was first formulated. Dangerous goods IBC tear test method1 ScopeThis standard specifies the flexible intermediate bulk containers of dangerous goods tear test equipment, the number of samples, sample preparation, test procedures and test report. This standard applies to tear test flexible intermediate bulk containers of dangerous goods.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4122.1 Packaging term basis GB 19433.1 inspection of packaging of dangerous goods by air safety regulations General GB 19434.1 dangerous goods safety inspection IBC General specifications3 Terms and DefinitionsGB/T 4122.1 and GB 19434.1 and established the following terms and definitions apply to this standard. 3.1 Also known as medium-sized bulk containers, rigid or flexible means movable container outside a predetermined range of GB 19433.1, these containers. a) has the following capacity. --- Fitted Ⅱ Packing and packaging group Ⅲ solids and liquids not more than 3.0m3; --- Class Ⅰ packaging solid, such as mounted on a flexible, rigid plastic, the composite, fibreboard and wooden IBCs not more than 1.5m3; --- Ⅰ type of packaging solid, such as mounted on the metal intermediate bulk containers of not more than 3.0m3; b) Design of mechanical handling; c) be able to withstand handling and transportation stresses generated, the stress is determined experimentally. 3.2 Also known as flexible intermediate bulk containers, which are consistent with GB 19434.1 defined in intermediate bulk containers, a film, woven fibers, textiles and He flexible material tank, and combinations thereof, can be added to the coating or lining and an auxiliary equipment and handling apparatus constructed as necessary Bulk containers. Flexible intermediate bulk container has the following types. a) 13H1 without coating or liner woven plastics b) 13H2 woven plastics coated c) 13H3 woven plastics with liner d) 13H4 woven coated and lined with plastic e) 13H5 plastics film f) 13L1 textile without coating or liner material g) 13L2 coated textiles h) 13L3 textile with liner i) 13L4 coated and textile lining ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21591-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21591-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21591-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21591-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
