GB/T 21182-2022 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 21182-2022: Scraps of cemented carbide Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 21182: Historical versions
Similar standardsGB/T 21182-2022: Scraps of cemented carbide---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT21182-2022GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.120 CCS H 69 Replacing GB/T 21182-2007 Scraps of cemented carbide ISSUED ON: OCTOBER 12, 2022 IMPLEMENTED ON: MAY 01, 2023 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 5 4 Classification ... 5 5 Technical requirements ... 6 6 Test methods ... 7 7 Inspection rules ... 7 8 Marking, packaging, transportation, storage and accompanying documents ... 8 9 Order form content... 9 Appendix A (Informative) Reference pictures of conventional bulk scraps of cemented carbide ... 10ForewordThis document was drafted in accordance with the rules given in GB/T 1.1-2020, Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents. This document replaces GB/T 21182-2007 Scraps of cemented carbide; compared with GB/T 21182-2007, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Change the scope of application (see Chapter 1; Chapter 1 of the 2007 edition); b) Change some normative references (see Chapter 2; Chapter 2 of the 2007 edition); c) Add instructions for classification (see Chapter 4); d) Add “profiles” to the group of “conventional bulk scraps of cemented carbide”, including four varieties of “bars”, “boards”, “tubes” and “micro-drills” (see Chapter 4); e) Add the general requirements (see 5.1); f) Add the requirements for appearance quality (see 5.2); g) Change the requirements for chemical composition (see 5.3; 3.2 of the 2007 edition); h) Change the sampling method (see 7.4; 5.4 of the 2007 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying patents. This document was proposed by the China Nonferrous Metals Industry Association. This document shall be under the jurisdiction of National Technical Committee 243 on Nonferrous Metals of Standardization Administration of China (SAC/TC 243). Drafting organizations of this document: Zigong Great Wall CRD New Material Co., Ltd., Xiamen Golden Heron Special Alloy Co., Ltd., Zhuzhou Cemented Carbide Group Co., Ltd., Nanchang Cemented Carbide Co., Ltd. Chief drafting staffs of this document: Liu Zhi, Yang Hao, Dong Zhiping, Liu Jiang, Chen Chengyi, Xie Haiwei, Liang Hong, Gong Bin, Huang Shuai, Wu Xiaogang. This document was first published in 2007, and this is the first revision. Scraps of cemented carbide1 ScopeThis document specifies the classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order form for scraps of cemented carbide. This document applies to the recyclable residues and wastes containing tungsten and cobalt generated during the production and use of cemented carbide products (hereinafter referred to as scraps of cemented carbide).2 Normative referencesThe following documents are normatively referenced in this document and are indispensable for its application. For dated references, only the version corresponding to that date is applicable to this document; for undated references, the latest version (including all amendments) is applicable to this document. GB/T 4324.11, Methods for chemical analysis of tungsten - Part 11: Determination of aluminum content - Inductively coupled plasma atomic emission spectrometry GB/T 4324.12, Methods for chemical analysis of tungsten - Part 12: Determination of silicon content - Chlorination-molybdenum blue spectrophotometry GB/T 5124.1, Methods for chemical analysis of hardmetals - Determination of total carbon content - Gravimetric method GB/T 5124.2, Methods for chemical analysis of hardmetals - Determination of insoluble (free) carbon content - Gravimetric method GB/T 5158 (all parts), Metallic powders - Determination of oxygen content by reduction methods GB/T 5314, Powders for powder metallurgical purposes - Sampling GB/T 20255.1, Methods for chemical analysis of hardmetals - Determination of calcium, potassium, magnesium and sodium contents - Flame atomic absorption spectrometric method GB/T 26050, Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method6 Test methods6.1 General requirements The general requirements for scraps of cemented carbide are visually inspected or measured with a measuring tool of corresponding precision. 6.2 Appearance quality The appearance quality of scraps of cemented carbide is visually inspected. 6.3 Chemical composition 6.3.1 The detection of W, Co, Fe, Ni, Ti, Ta, Nb, V, Cr, Mn, Mo element content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 26050. 6.3.2 The detection of the total carbon content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 5124.1. 6.3.3 The detection of free carbon content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 5124.2. 6.3.4 The detection of Al element content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 4324.11. 6.3.5 The detection of Si element content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 4324.12. 6.3.6 The detection of Ca and Mg element content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 20255.1. 6.3.7 The detection of oxygen content in the chemical composition of scraps of cemented carbide shall be carried out according to the provisions of GB/T 5158 (all parts).7 Inspection rules7.1 Inspection and acceptance 7.1.1 Scraps of cemented carbide shall be inspected by the supplier or a third party, to ensure that the quality complies with the provisions of this document and the order form. 7.1.2 The buyer can inspect the received scraps of cemented carbide in accordance with the provisions of this document and the order form. If the inspection results are inconsistent with the provisions of this document and the order form, they shall be sealed separately, and submitted to the supplier within one month from the date of receipt, and negotiated by both parties. 7.2 Batch Scraps of cemented carbide shall be submitted for acceptance in batches, and each batch shall consist of scraps of the same type and composition. 7.3 Inspection items Each batch of scraps of cemented carbide shall be inspected for general requirements and appearance quality, as well as chemical composition when it is specified in the order form. 7.4 Sampling The sampling for testing the chemical composition of scraps of cemented carbide shall be representative. Each batch of bulk scraps can be divided into 2 ~ 3 types according to the principle of similar appearance, shape and size. For each type, take one sample, which is about 100 g. For powder scraps, after mixing evenly, take 2 ~ 3 parts according to the provisions of GB/T 5314. If there are special requirements, it shall be determined by the supplier and the buyer through negotiation. 7.5 Determination of the test result 7.5.1 When the inspection result of the general requirements or the appearance quality of scraps of cemented carbide is unqualified, judge the batch of scraps as unqualified. 7.5.2 When the inspection result of chemical composition of scraps of cemented carbide is unqualified, double sampling is allowed for repeated inspection. If any result of the repeated inspection is unqualified, judge the batch of scraps as unqualified.8 Marking, packaging, transportation, storage andaccompanying documents 8.1 Marking Each batch of scraps of cemented carbide shall be labeled and indicated with: a) name of the supplier; b) category, variety; c) batch number; d) weight. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 21182-2022 be delivered?Answer: The full copy PDF of English version of GB/T 21182-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 21182-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21182-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 21182-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 21182-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21182-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 21182-2022?A step-by-step guide to download PDF of GB/T 21182-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 21182-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
