GB/T 20441.1-2010 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20441.1-2010: Electroacoustics -- Measurement microphones -- Part 1: Specifications for laboratory standard microphones
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20441.1-2010	194	Add to Cart	3 days	Electroacoustics -- Measurement microphones -- Part 1: Specifications for laboratory standard microphones	Valid

Similar standards

GB/T 20247   GB/T 19889.1   GB/T 19890   GB/T 20441.8   GB/T 20441.7   GB/T 20441.2   

Basic data

Standard ID: GB/T 20441.1-2010 (GB/T20441.1-2010)
Description (Translated English): Electroacoustics -- Measurement microphones -- Part 1: Specifications for laboratory standard microphones
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A59
Classification of International Standard: 17.140.50
Word Count Estimation: 10,152
Date of Issue: 2010-12-01
Date of Implementation: 2011-05-01
Older Standard (superseded by this standard): GB/T 11670-1989
Quoted Standard: IEC 60050-801-1994; ASME B1.1-1989
Adopted Standard: IEC 61094-1-2000, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2010 (No. 164 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the condenser microphone used as a laboratory standard mechanical dimensions and acoustic properties, making the sound pressure value to be realized, and allows measurement of sound pressure to achieve the highest measurement accuracy. This specification ensures simple reciprocity law for primary -level calibration. This section provides laboratory standard condenser microphones by the mechanical dimensions and electro-acoustic characteristics established classification system, in order to standardize calibration method to achieve inter-laboratory comparison, the same microphones in different laboratories, including calibration and a given calibration microphone system interchangeability.

GB/T 20441.1-2010: Electroacoustics -- Measurement microphones -- Part 1: Specifications for laboratory standard microphones

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electroacoustics Measurement microphones Part 1. Specifications for laboratory standard microphones ICS 17.140.50 A59 National Standards of People's Republic of China Replacing GB/T 11670-1989 Electric acoustic measurement microphone Part 1. Laboratory standard microphones Part 1. Specificationsforlaboratorystandardmicrophones (IEC 61094-1.2000, IDT) Issued on. 2010-12-01 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 20441 "electric acoustic measurement microphone" is divided into seven sections. --- Part 1. Laboratory standard microphones; --- Part 2. Method using the original grade reciprocity technique of laboratory standard microphones sound pressure calibration; --- Part 3. Method using the original grade reciprocity technique of laboratory standard microphones free-field calibration; --- Part 4. Specifications for working standard microphones; --- Part 5. working standard microphones calibration by comparison method; --- Part 6. Determination of the frequency response of the electrostatic actuator; --- Part 7. difference between laboratory standard microphones free-field sensitivity and sound pressure sensitivity between. This section GB/T 20441 Part 1. This section identical with IEC 61094-1.2000 "Measurement microphones - Part 1. Laboratory standard microphones" (in English). At the same time according to GB/T 1.1-2000 requirements of this section of IEC 61094-1.2000 made the appropriate editorial changes. the IEC Foreword Introduction to the country. This Part replaces GB/T 11670-1989 "characteristic acoustic laboratory standard condenser microphones and norms." This portion of the GB/T 11670-1989 main differences. a) by deleting the CB1aP and CB2aP dimensions series. b) laboratory standard microphones by the letters "LS" (or "standard laboratory" in English initials) that, instead of her "CB". c) an increase LS2P and technical indicators. This part of the National Standardization Technical Committee electro-acoustics (SAC/TC23) and focal points. This part mainly drafted by. Institute of Acoustics, Hengyang Heng Instrument Electric Co., Ltd., China Institute of Metrology, China Electronics Technology Group Corporation Institute. The main drafters of this section. Zhang Yu Wei, Li Xiaodong, Liu Xiangheng, Chen Jianlin, Wengtai Lai, Luyang. This Part replaces the previous release case. --- GB/T 11670-1989. Electric acoustic measurement microphone Part 1. Laboratory standard microphones

1 Scope

This section provides the mechanical dimensions and acoustic properties used as a laboratory standard condenser microphone, so that the magnitude of the sound pressure can be achieved, and Sound pressure measurements can achieve the highest measurement accuracy. This specification to ensure that the reciprocity law for simple primary-level calibration. This section provides press mechanical dimensions and electrical characteristics of acoustic laboratory standard condenser microphones established classification system in order to standardize calibration Methods to achieve inter-laboratory comparison, including the same in the calibration microphone and a microphone to a given calibration system under mutual different laboratories Transsexual.

2 Normative references

The following documents contain provisions which, through reference GB/T 20441 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. IEC 60050 (801).1994 International Electrotechnical Vocabulary Chapter 801. Acoustics and electro-acoustics ASMEB1.1. 1989 Unified inch screw threads (UN and UNR thread form)

3 Terms and Definitions

The following terms and definitions apply to this section. Note. The underlined plural. 3.1 Condenser microphone condensermicrophones The use of the microphone capacitance change work. NOTE. condenser microphone work is achieved through a constant charge, the constant charge polarization voltage obtained from the outside, by a suitable polarization voltage having a high internal Power generating resistance. 3.2 Laboratory standard microphones laboratorystandardmicrophone Available original level calibration method, such as a sealed coupling cavity reciprocity law, to a high accuracy calibration of condenser microphone. Consider stability over time And dependent on environmental conditions, the mechanical dimensions and acoustic properties to meet stringent requirements. 3.3 Open circuit voltage open-circuitvoltage In addition to a microphone connected to its ground shield structure (the structure described in 7.2), no other electrical load, measured using the insert voltage technique Of the AC voltage electrical output of the microphone for the open circuit voltage. Unit. V, V. NOTE. The end voltage condenser microphone relating to its load, the load generated by the microphone to the unit mechanical and electrical pre-amplifier. and so Used to measure the open circuit voltage microphone preamplifier should meet the requirements of 7.2. 3.4 Microphone pressure sensitivity pressuresensitivityofamicrophone For a given frequency and given to a sinusoidal acoustic environmental conditions, the microphone open-circuit voltage and uniformly applied on microphone diaphragm (ie microphone ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20441.1-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20441.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20441.1-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20441.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.