GB/T 1962.2-2001 PDF EnglishUS$70.00 · In stock · Download in 9 seconds
GB/T 1962.2-2001: Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment -- Part 2: Lock fittings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 1962.2-2001: Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment -- Part 2: Lock fittings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1962.2-2001 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 11.040.20 C 31 GB/T 1962.2-2001 / idt ISO 594-2.1998 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 2. Lock fittings Issued on. SEPTEMBER 18, 2001 Implemented on. FEBRUARY 01, 2002 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the PRC Table of ContentsForeword... 3 ISO Foreword... 4 1 Scope... 5 2 Reference standards... 5 3 Dimensions... 6 4 Requirements... 10 5 Test methods... 12ForewordThis Standard is identical to ISO 594-2.1998 "Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 2.Lock fittings". This Standard was proposed by National Medical Products Administration. This Standard shall be under the jurisdiction of National Technical Committee 95 on Injector for Medical Purpose of Standardization Administration of China. Drafting organization of this Standard. Shanghai Centre for Medical Equipment Quality Supervision and Testing, National Medical Products Administration. Main drafters of this Standard. Fu Guobao, Zhao Jing.ISO ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 594-2 was prepared by Technical Committee ISO/TC 84, Medical devices for injections. This second edition of ISO 594-2 cancels and replaces the first edition (ISO 594-2.1991), of which it constitutes a minor revision. Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment – Part 2.Lock fittings1 ScopeThis Standard specifies dimensions, requirements, test methods for conical lock fittings with a 6 % (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use, e.g. transfusion equipment.2 Reference standardsThe following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard. At the time of publication of this Standard, the editions shown are valid. All standards will be revised. Parties using this Standard shall explore the possibility of using the latest editions of the following standards.3 DimensionsThe dimensions of male and female lock fittings made of rigid materials shall be as shown in Figures 1 to 4 and as given in Table 1.4 RequirementsWhen the fitting is tested in accordance with 5.2, there shall be no leakage sufficient to form a falling drop. When the fitting is tested in accordance with 5.8, there shall be no evidence of stress cracking of the fitting.5 Test methodsOther test methods may be used if good correlation is shown with the reference test given in 5.3.2 or 5.3.3.In cases of dispute, the methods given in this Standard shall be the referee methods. Follow the same test procedure as specified in 5.3.2, but using a syringe with a male reference fitting, the dimensions of which are in accordance with those shown in Figure 7, to mate with the female fitting under test. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 1962.2-2001 be delivered?Answer: The full copy PDF of English version of GB/T 1962.2-2001 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 1962.2-2001_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1962.2-2001_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1962.2-2001 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 1962.2-2001?A step-by-step guide to download PDF of GB/T 1962.2-2001_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 1962.2-2001". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
