GB/T 1962.1-2015 PDF EnglishUS$125.00 · In stock · Download in 9 seconds
GB/T 1962.1-2015: Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment -- Part 1: General requirement Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 1962.1: Historical versions
Similar standardsGB/T 1962.1-2015: Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment -- Part 1: General requirement---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1962.1-2015 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 11.040.20 C 31 GB/T 1962.1-2015 / ISO 594-1.1986 Replacing GB/T 1962.1-2001 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1. General requirement (ISO 594-1.1986, IDT) Issued on. DECEMBER 10, 2015 Implemented on. JANUARY 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Dimensions... 5 4 Requirements... 7 5 Test methods... 8 Annex A... 14ForewordGB/T 1962 Conical fittings with a 6%(Luer) taper for syringes, needles and certain other medical equipment consists of two parts. - Part 1.General requirement; - Part 2.Lock fittings. This Part is the first part of GB/T 1962. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 1962.1-2001 Conical fittings with a 6%(Luer) taper for syringes, needles and certain other medical equipment - Part 1.General requirement. This Part uses translation method and identically adopts ISO 594-1.1986 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1.General requirements. The Chinese documents which have consistency with the international normative reference in this Part are as follows. GB 15810-2001 Sterile hypodermic syringes for single use (eqv ISO 7886- 1.1993) YY 0573.3-2005 Sterile hypodermic syringes for single use (ISO 7886- 3.2005, IDT) YY 0573.4-2010 Sterile hypodermic syringes for single use - Part 4.Syringes with re-use prevention feature (ISO 7886-4.2006, IDT) This Part makes the following editorial modifications. - deleted Clause 1 “Introduction” of ISO 594-1.1986. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The issuing authority shall not be held responsible for identifying any or all such patent rights. This Part was proposed by State Food and Drug Administration. This Part shall be under the jurisdiction of National Technical Committee on Medical Syringe (Needle) of Standardization Administration of China (SAC/TC 95). The drafting organization of this Part. Shanghai Institute of Medical Instrumentation. Main drafter of this Part. Lu Liyuan. This Part was issued for the first time in September, 2001. Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1. General requirement1 ScopeThis part of GB/T 1962 specifies requirements for conical fittings with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use such as transfusion and infusion sets.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7886 Sterile hypodermic syringes for single use3 DimensionsThe dimensions of male and female conical fittings shall be as given in the table and as shown in figure 1.4 RequirementsThere shall be no leakage sufficient to form a falling drop of water under the test conditions described in 5.2. The conical fitting under test shall remain attached to the test fixture, under the test conditions described in 5.4. There shall be no evidence of stress cracking of the conical fitting, under the test conditions described in 5.5.5 Test methodsThe procedure shall be carried out as specified in 5.3.1.1 to 5.3.1.7. Conduct the test as for 5.3.1 but using a syringe with a steel male reference fitting in accordance with figure 5 to mate with the female fitting under test. The procedure shall be carried out as specified in 5.5.1 to 5.5.3. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 1962.1-2015 be delivered?Answer: The full copy PDF of English version of GB/T 1962.1-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 1962.1-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1962.1-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1962.1-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 1962.1-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1962.1-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 1962.1-2015?A step-by-step guide to download PDF of GB/T 1962.1-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 1962.1-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
