GB/T 19314.9-2019 English PDF

US$1324.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19314.9-2019: Small craft -- Hull construction and scantlings -- Part 9: Sailing craft appendages
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 19314.9-2019	1324	Add to Cart	6 days	Small craft -- Hull construction and scantlings -- Part 9: Sailing craft appendages	Valid

Similar standards

JT/T 258   GB/T 37348   GB/T 37335   GB/T 19314.10   GB/T 19314.3   GB/T 19314.4   

Basic data

Standard ID: GB/T 19314.9-2019 (GB/T19314.9-2019)
Description (Translated English): Small craft -- Hull construction and scantlings -- Part 9: Sailing craft appendages
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U18
Classification of International Standard: 47.080
Word Count Estimation: 70,783
Date of Issue: 2019-05-10
Date of Implementation: 2019-12-01
Quoted Standard: GB/T 19314.5-2019; GB/T 19314.6-2019; ISO 898-1; ISO 3506-1; ISO 8666; ISO 12215-3; ISO 12217-2
Adopted Standard: ISO 12215-9-2012, IDT
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the loads and dimensions of the appendages of monohull sailing yachts with a hull degree not greater than 24m measured in accordance with ISO 8666, including: design stress; structural parts to be evaluated; load conditions and Design load cases; calculation methods and model building requirements; measures to meet requirements.

GB/T 19314.9-2019: Small craft -- Hull construction and scantlings -- Part 9: Sailing craft appendages

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Small craft--Hull construction and scantlings--Part 9. Sailing craft appendages ICS 47.080 U18 National Standards of People's Republic of China Boat structure and component size Part 9. Sailboat possession Part 9. Sailingcraftappendages (ISO 12215-9.2012, IDT) Published on.2019-05-10 2019-12-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 symbol 2 5 design stress 3 6 Structural components to be evaluated 5 7 working conditions 5 8 Calculation method 12 9 Compliance 13 Appendix A (Normative) Application Statement 14 Appendix B (informative) Metal information and fastening and welding of accessories and fasteners 15 Appendix C (informative appendix) Ballast keel structure arrangement 25 Appendix D (informative) Algorithm for keel fin strength (fixed or inclined) and bolted to fixed ballast keel 36 Appendix E (informative) Geometric characteristics of some typical appendage airfoils 50 Appendix F (informative) Simplified fatigue strength assessment 53 References 64

Foreword

GB/T 19314 "Small boat hull structure and component size" is divided into 9 parts. --- Part 1. Materials. thermosetting resins, glass fiber reinforced plastics, reference laminates; --- Part 2. Materials. core materials for embedded structures, embedded materials; --- Part 3. Materials. steel, aluminum alloy, wood, other materials; --- Part 4. Workshop and manufacturing; --- Part 5. Determination of design pressure, design stress and component size of single vessel; --- Part 6. Structural arrangements and details; --- Part 7. Determination of the dimensions of multi-hull ship components; --- Part 8. Rudder; --- Part 9. Sailboat possession. This part is the ninth part of GB/T 19314. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the translation method equivalent to ISO 12215-9.2012 "Small boat hull structure and component dimensions - Part 9. Sail boats Attached. The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---GB/T 19916-2005 Main data of small boats (ISO 8666.2002, IDT) --- GB/T 19314.3-2019 dinghy structure and component dimensions - Part 3. Materials. steel, aluminium alloy, timber and His materials (ISO 12215-3.2002, IDT) --- GB/T 20895.2-2007 Assessment and classification of stability and buoyancy of boats - Part 2. hull length not less than 6 m Sail boat (ISO 12217-2.2002, IDT) This part is proposed and managed by the National Small Boat Standardization Technical Committee (SAC/TC241). This section drafted by. China Shipbuilding Industry Comprehensive Technology and Economic Research Institute, China Shipbuilding Corporation, the 708th Institute. The main drafters of this section. Zhu Jiashuai, Li Jun, Li Jiangtao, Liu Xinyu. Boat structure and component size Part 9. Sailboat possession

1 Scope

This part of GB/T 19314 specifies the load and ruler of a single sail boat with a length of not more than 24m as measured by ISO 8666. Inch, including. ---Design stress; ---Structural parts to be evaluated; ---The working condition and design load of the load on the middle insert plate and keel; --- Calculation methods and model construction requirements; --- Measures to meet the requirements.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 19314.5-2019 hull structure and component dimensions - Part 5. singular design pressure, design stress, Determination of dimensions (ISO 12215-5.2008, IDT) GB/T 19314.6-2019 hull structure and component dimensions - Part 6. Structural arrangements and details (ISO 12215-6. 2008, IDT) Mechanical properties of carbon steel and alloy steel fasteners - Part 1. Bolts, screws and screws with special performance grades Column coarse thread and fine pitch thread (Mechanicalpropertiesoffastenersmadeofcarbonsteelandaloysteel- Part 1.Bolts,screwsandstudswithspecifiedpropertyclasses-Coarsethreadandfinepitchthread) Mechanical properties of corrosion resistant stainless steel fasteners - Part 1. Bolts, screws and studs (Mechanical Propertiesofcorrosionresistantstainlesssteelfasteners-Part 1.Bolts,screwsandstuds) ISO 8666 dinghy main data (Smalcraft-Principaldata) ISO 12215-3 hull structure and component dimensions - Part 3. Materials. steel, aluminium alloy, timber and other materials (Smal craft-Hulconstructionandscantlings-Part 3. Materials-Steel, aluminiumaloys, wood, otherma- Terials) ISO 12217-2 Assessment and classification of stability and buoyancy of boats - Part 2. Sailboats with a hull length not less than 6 m (Smal craft-Stabilityandbuoyancyassessmentandcategorization-Part 2.Sailingboatsofhullength Greaterthanorequalto6m)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Design category designcategories According to the applicable sea conditions and wind power, the design of the boat assessed according to this standard is divided. Assume that the boat is driving correctly, speed and main sea conditions ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19314.9-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19314.9-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19314.9-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19314.9-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.