GB/T 19283-2010 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19283-2010: Dimensions series of container ship passing -- The lock of Three Gorges Dam
Status: Obsolete

GB/T 19283: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 19283-2010	279	Add to Cart	3 days	Dimensions series of container ship passing -- The lock of Three Gorges Dam	Obsolete
GB/T 19283-2003	199	Add to Cart	2 days	Dimensions series of container ship passing the lock of three gorges dam	Obsolete

Similar standards

JT/T 258   GB/T 37348   GB/T 37335   GB/T 17872   GB/T 30007   GB 38030.1   

Basic data

Standard ID: GB/T 19283-2010 (GB/T19283-2010)
Description (Translated English): Dimensions series of container ship passing -- The lock of Three Gorges Dam
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U10
Classification of International Standard: 47.020
Word Count Estimation: 7,754
Date of Issue: 2011-01-14
Date of Implementation: 2011-06-01
Older Standard (superseded by this standard): GB/T 19283-2003
Regulation (derived from): National Standard Approval Announcement 2011 No.2
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the Three Gorges Passing of Container Ship master scale series. This standard applies to the Yangtze River Three Gorges and Gezhouba Project by container ship.

GB/T 19283-2010: Dimensions series of container ship passing -- The lock of Three Gorges Dam

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dimensions series of container ship passing. The lock of Three Gorges Dam ICS 47.020 U10 National Standards of People's Republic of China Replacing GB/T 19283-2003 Three gorges dam Container Ships Series Issued on. 2011-01-14 2011-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 19283-2003 "three gorges dam Container Ships' series." This standard and GB/T 19283-2003 compared to the main changes are as follows. --- Press ballast tank on the order to classify; according to the new navigation conditions adjusted (see Table 1) for all types of ship principal. --- LOA is a variation range (see Table 1). --- New 300TEU corresponding main scale (see Table 1). The standard proposed by the Ministry of Transport of the People's Republic of China. This standard by the National Standardization Technical Committee riverboats (SAC/TC130) centralized. This standard was drafted. Wuhan University, Wuhan, China Classification Society Institute specification. The main drafters of this standard. Chen Shunhuai, Wang Lizheng, Zhangzheng Bo, Yu Jinsheng, Li Junmin. This standard replaces the standards previously issued as follows. --- GB/T 19283-2003. Three gorges dam Container Ships Series

1 Scope

This standard specifies the three gorges dam of Container Ship Principal Dimensions series. This standard applies to the Yangtze River Three Gorges and Gezhouba Project by container ship.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 Overall Length overal length Hull (including permanent fixed structure including) among the forefront to the rearmost surface perpendicular to the direction of the station amidships measure distance. Symbol. LOA. 2.2 Overall width overal breadth From one side to the other side of the vertical center line plane of the ship in the direction of measurement (measured to the outside of the outer hull plate, fenders or the edge trim) Maximum distance from. Symbol. BOA. 2.3 Breadth breadth The maximum width of the hull planking is not included, including, freeboard deck extending width not included. Symbol. B.

3 three gorges dam of Container Ship Principal Dimensions Series

Three gorges dam of Container Ship Principal Dimensions series should be consistent with the requirements of Table 1. Table 1 three gorges dam of Container Ship Principal Dimensions Series Ballast tank middleweight TEU Total Length LOA/m Breadth B/m Reference Design draft T/m 50 62 to 64 10.8 2.0 - 2.4 ~ 6067 ~ 70 13.0 2.0 2.6 10 072 ~ 75 3.0 ~ 13.0 2.6 15 085 ~ 90 3.2 ~ 13.6 2.8 20085 ~ 90 14.8 16.2 2.8 to 3.2 3.0-3.5 92-98 105-110 16.2 3.5 to 4.0 3.5 to 4.0 300 105 110 17.2 ~ 3.5 ~ 4.0 Note 1. The above container capacity to load 20 feet standard containers (TEU) container loading capacity, cargo box average weight of 13 t/T EU. Note 2. This series adopts plate-type fenders ship, the ship should meet the total length, breadth specified requirements. Note 3. The ship's draft restrictions meet the requirements of the competent authority. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19283-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19283-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19283-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19283-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19283-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19283-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.