GB/T 18968-2019 English PDFUS$1559.00 ยท In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18968-2019: Terms of wall materials Status: Valid GB/T 18968: Historical versions
Basic dataStandard ID: GB/T 18968-2019 (GB/T18968-2019)Description (Translated English): Terms of wall materials Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q15 Classification of International Standard: 91.100.01 Word Count Estimation: 78,776 Date of Issue: 2019-08-30 Date of Implementation: 2020-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 18968-2019: Terms of wall materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terms of wall materials ICS 91.100.01 Q15 National Standards of People's Republic of China Replace GB/T 18968-2003 Wall material terminology Published on.2019-08-30 2020-07-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 basic term 1 3 Product Name 8 4 raw materials 21 5 Production Process 30 6 main production equipment 33 7 Application materials 38 8 Product Performance 39 9 Other related terms 46 Reference 49 Index 50ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 18968-2003 "Wall Material Terminology". Compared with GB/T 18968-2003, except editorial modification The technical changes are as follows. --- Added 93 terms from Chapter 2 to Chapter 9 (see Chapters 2 through 9); --- Removed non-sintered ordinary clay bricks (see 3.4 of.2003 edition), thermal bridges, cold bridges (see 8.5.28 of the.2003 edition); --- Revised wall material (see 2.1,.2003 edition 2.2), perforated brick (see 2.2.1.7,.2003 edition 2.2.1.7), hollow brick (See 2.2.1.8, 2.2.1.8 of the.2003 edition), bricks (see 2.2.1.15, 2.2.1.16 of the.2003 edition), and core panels (see 2.2.3.10, 2.2.3.10) of the.2003 edition, side (see 2.3.8, 8.1.8 of the.2003 edition), top surface (see 2.3.9, 8.1.9 of the.2003 edition), End face (see 2.3.10, 8.1.10 of the.2003 edition), paving surface (see 2.3.11, 8.1.11 of the.2003 edition), sitting on the pulp surface (see 2.3.12, 8.1.12 of the.2003 edition, holes (see 2.3.28, 8.1.25 of the.2003 edition), sintered ordinary bricks (see 3.1,.2003) Version 3.1), sintered clay ordinary brick (see 3.1.1,.2003 edition 3.3.1), sintered shale ordinary brick (see 3.1.2,.2003 edition) 3.1.2), sintered gangue ordinary brick (see 3.1.3,.2003 version 3.1.3), sintered fly ash ordinary brick (see 3.1.4,.2003) 3.1.4) of the annual edition, sintered clay perforated bricks (see 3.2.1, 3.2.1 of the.2003 edition), sintered shale porous bricks (see 3.2.2,.2003) 3.2.2) of the annual edition, sintered gangue porous brick (see 3.2.3, 3.2.3 of.2003 edition), sintered fly ash perforated brick (see 3.2.4, 2003 version 3.2.4), sintered shale hollow bricks (see 3.3.2,.2003 edition 3.3.2), sintered coal gangue hollow bricks (see 3.3.3, 3.3.3) of the.2003 edition, autoclaved aerated concrete blocks (see 3.15.10, 3.16.8 for the.2003 edition), cement (see 4.7.1, 4.2.1) of the.2003 edition, splitting (see 8.1.6, 8.3.11 of the.2003 edition), underfire (see 8.1.17.1, 8.4.1 of the.2003 edition), Over-fire (see 8.1.17.2, 8.4.2 of the.2003 edition), drying cycle (see 9.17, 8.5.2 of the.2003 edition), drying system (see 9.18,.2003 edition of 8.5.24), drying curve (see 9.19, 8.5.25 of the.2003 edition). This standard was proposed by the China Building Materials Federation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Wall and Roof Building Materials (SAC/TC285). This standard was drafted. Henan Building Materials Research and Design Institute Co., Ltd., Hefei Jiaan Building Materials Co., Ltd., Hefei Wushan Building Materials Co., Ltd., Henan Institute of Hydraulic Research, Jilin Province Wall Materials Innovation and Building Energy Conservation Office, Xi'an Wall Materials Research and Design Institute Limited. The main drafters of this standard. Chen Shengqiang, Chen Hongjun, Li Wenli, Li Jun, Li Jun, Cheng Lijun, Sun Huaqi, Guan Hongbo, Gao Ge, Zheng Wenheng. The previous versions of the standards replaced by this standard are. ---GB/T 18968-2003. Wall material terminology1 ScopeThis standard defines the basic terms, product names, raw materials, production processes, main production equipment and application packages of wall materials and products. Definition and meaning of materials, product performance, and other related terms. This standard applies to teaching, research, design, production and application, trade, writing and translation technical documents.2 basic terms2.1 Wall material walmaterials The product unit that constitutes the wall of the building. There are mainly bricks, blocks, plates and so on. 2.2 Types of wall materials 2.2.1 Brick brick Artificial small blocks for construction. The appearance is mostly a right-angled hexahedron, but also various shapes. Its length does not exceed 365mm, the width is not More than 240mm, the height does not exceed 115mm. 2.2.1.1 Ordinary brick commonbrick Standard brick normalbrick Nine-five brick A brick having a size of 240 mm x 115 mm x 53 mm. 2.2.1.2 Eight-five brick 81/2brick Bricks measuring 216 mm x 105 mm x 43 mm. 2.2.1.3 Shaped brick specialshapedbrick Shapes are not rectangular hexahedral bricks. Often named after shapes, such as knife-edge bricks, axe bricks, fan-shaped bricks, etc. 2.2.1.4 With brick auxiliarybrick Brick used in conjunction with the main specification brick during masonry. Such as half bricks, seven points, and so on. 2.2.1.5 Solid brick solidbrick Bricks with no holes or holes with a porosity of less than 25%. 2.2.1.6 Microporous brick porousbrick Microporous bricks are formed in the brick by firing into a pore forming material such as polystyrene beads, sawdust, and the like. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18968-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 18968-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18968-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18968-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18968-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18968-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
