GB/T 18883-2022 PDF EnglishUS$635.00 · In stock · Download in 9 seconds
GB/T 18883-2022: Standards for indoor air quality Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 18883: Historical versions
Similar standardsGB/T 18883-2022: Standards for indoor air quality---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18883-2022GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.040.01 CCS C 51 Replacing GB/T 18883-2002 Standards for Indoor Air Quality Issued on: JULY 11, 2022 Implemented on: FEBRUARY 1, 2023 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and Definitions... 6 4 Requirements for Indoor Air Quality... 7 5 Determination and Evaluation of Indoor Air Quality Indicators... 8 Appendix A (normative) Technical Guideline for Indoor Air Quality Indicator Testing ... 10 Appendix B (normative) Determination of Formaldehyde... 18 Appendix C (normative) Determination of Benzene, Toluene and Xylene... 23 Appendix D (normative) Determination of Total Volatile Organic Compounds (TVOC) ... 39 Appendix E (normative) Determination of Benzo [a] pyrene in Inhalable Particulate Matter... 48 Appendix F (normative) Determination of Inhalable Particulate Matter and Fine Particulate Matter... 53 Appendix G (normative) Determination of Total Number of Bacteria... 57 Appendix H (normative) Determination of Radon... 59 Bibliography... 681 ScopeThis document specifies the physical, chemical, biological and radioactive indicators and requirements of indoor air quality, and describes the determination methods of each indicator. This document is applicable to residential and office buildings. Other indoor environments may take this document as a reference.2 Normative ReferencesThe contents of the following documents constitute indispensable clauses of this document through the normative references in this text. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB 3095-2012 Ambient Air Quality Standard GB/T 12372 Standard Method for Examination of Nitrogen Dioxide in Air of Residential Areas - Modified Saltzman Method GB/T 14669 Air Quality - Determination of Ammonia - Ion Selective Electrode Method GB/T 15435 Ambient Air - Determination of Nitrogen Dioxide - Saltzman Method GB/T 16128 Standard Method for Hygienic Examination of Sulfur Dioxide in Air of Residential Areas - Formaldehyde Solution Sampling - Pararosaniline Hydrochloride Spectrophotometric Method GB/T 16129 Standard Method for Hygienic Examination of Formaldehyde in Air of Residential Areas - Spectrophotometric Method GB/T 18204.1 Examination Methods for Public Places - Part 1.Physical Parameters GB/T 18204.2 Examination Methods for Public Places - Part 2.Chemical Pollutants GB/T 27476.5 Safety in Testing Laboratories - Part 5.Chemical Aspects GB/T 32465 Requirements for Verification & Validation of Detection Methods and Internal Quality Control on Chemical Analysis HJ 93 Specifications and Test Procedures for PM10 and PM2.5 Sampler HJ/T 167 Technical Specifications for Monitoring of Indoor Air Quality HJ 533 Air and Exhaust Gas - Determination of Ammonia - Nessler’s Reagent Spectrophotometry HJ 590 Ambient Air - Determination of Ozone - Ultraviolet Photometric Method3 Terms and DefinitionsWhat is defined in GB 3095-2012, and the following terms and definitions are applicable to this document. 3.1 Indoor Air Quality Indicator Indoor air quality indicator refers to physical, chemical, biological and radioactive indicators related to human health in indoor air. 3.2 Inhalable Particulate Matter; PM10 Inhalable particulate matter refers to the particulate matter suspended in the air with a particle size (aerodynamic equivalent diameter) less than or equal to 10 m. [source. GB 3095-2012, 3.3, modified] 3.3 Fine Particulate Matter; PM2.5 Fine particulate matter refers to the particulate matter suspended in the air with a particle size (aerodynamic equivalent diameter) less than or equal to 2.5 m. [source. GB 3095-2012, 3.4, modified] 3.4 Total Volatile Organic Compounds; TVOC Total volatile organic compounds refer to the volatile organic compounds which are sampled by Tenax TA or equivalent packed adsorption tube, analyzed through non-polar or weakly polar capillary column (polarity index less than 10), and with a retention time between n-hexane and n-hexadecane.4 Requirements for Indoor Air Quality4.1 The indoor air shall be non-toxic, harmless, and with no abnormal odor. 4.2 The indoor air quality indicators and requirements shall comply with the stipulations of Table 1.5 Determination and Evaluation of Indoor Air QualityIndicators 5.1 The determination of indoor air quality indicators shall be carried out in accordance with Appendix A ~ Appendix H. 5.2 When the determination results of all physical, chemical, biological and radioactive indicators comply with the requirements of this document, it shall be evaluated that the indoor air quality complies with this document. When the determination result of any indicator fails to reach the requirements of this document, it shall be evaluated that the indoor air quality doesAppendix A(normative) Technical Guideline for Indoor Air Quality Indicator Testing A.1 Overview This guideline specifies the point layout, sampling time and frequency, sampling instruments, sampling methods, sampling records, sample transportation and storage, inspection methods, quality assurance measures, result calculation and expression, and laboratory safety of indoor air quality indicator testing. If there are clarified requirements in the determination methods of the various indoor air quality indicators, the determination methods shall prevail; if there are no requirements, this guideline may be taken as a reference. A.2 Point Layout A.2.1 Environmental requirements Before sampling, the doors and windows, air purification equipment and fresh air system shall be closed for at least 12 h. During sampling, the doors and windows, air purification equipment and fresh air system shall remain closed. In the indoor environment where the air conditioner is used, the air conditioner shall be kept in normal operation. The measurement of physical indicators and indoor radon measurement (solid nuclear track measurement method), as well as other measurements that fail to satisfy the aforementioned requirements shall be carried out under the normal use of the house. A.2.2 Number of sampling points The number of sampling points shall be determined in accordance with the indoor area and site conditions being monitored to correctly reflect the level of indoor air pollutants. For a single room with an area less than 25 m2, 1 point shall be set; for a single room with an area 25 m2 ~ 50 m2 (not included), 2 ~ 3 points shall be set; for a single room with an area 50 m2 ~ 100 m2 (not included), 3 ~ 5 points shall be set; for a single room 100 m2 and above, at least 5 points shall be set. A.2.3 Layout mode For single-point sampling, lay out the point in the center of the house; for multi-point sampling, the points shall be evenly distributed diagonally or in a quincunx pattern. The sampling point shall avoid ventilation openings and heat sources; the distance from the wall shall be greater than 0.5 m; the distance from the doors and windows shall be greater than 1 m. A.2.4 Height of sampling point In principle, it shall be consistent with the height of the adult’s breathing zone, and the relative height shall be between 0.5 m ~ 1.5 m. If conditions permit, in consideration of the breathing height of the sitting and lying state and the child’s height, the sampling at a relative height of 0.3 m ~ 0.6 m shall be added. A.3 Sampling Time and Frequency For the annual average concentration (for example, radon), conduct the sampling for at least 3 months (including winter); for the 24-hour average concentration (such as. benzo [a] pyrene, PM2.5 and PM10, etc.), conduct the sampling for at least 20 h; for the 8-h average concentration, conduct the sampling for at least 6 h; for the 1-h average concentration, conduct the sampling for 45 min; in accordance with different determination methods, continuous or interval sampling can be conducted. A.4 Sampling Instrument In accordance with the existence of the various indicators in the indoor air, select an appropriate equipment. The noise of the instrument and equipment shall generally be less than 50 dB(A); if the noise is too loud, the indoor noise shall be reduced through the mode of installing sound- absorbing boxes. A.5 Sampling Methods A.5.1 General requirements The sampling methods of the various indicators shall take the specific stipulations in the determination method as a reference. On the basis of the method applicability verification, the sampling method parameters, including sampling volume, sampling flow rate and sampling time, can be appropriately adjusted to satisfy the testing requirements for the indoor air quality indicators. The annual average and 8-hour average indicators are required. If the determination method allows, the screening method can be adopted first for the sampling. If the test results comply with the requirements of the indicators, they can be directly evaluated; if they fail to comply with the requirements, the cumulative method shall be adopted for the sampling. For benzo [a] pyrene, PM2.5 and PM10 that adopt the 24-h average, due to the limitation of the determination method, the screening method cannot be adopted, and the cumulative method needs to be directly adopted. A.5.2 Sampling with screening method For the screening method, the sampling should be conducted for 45 min. If a direct-reading instrument is used, the sampling interval is 10 min ~ 15 min; each point is monitored at least 4 ~ 5 times; the final result is expressed as a time-weighted average. Under special circumstances (for example, radon), in accordance with the requirements of different determination methods, the sampling shall be conducted for at least 24 h (consecutive measurement method) or 2 d ~ 7 d (activated carbon box measurement method). A.5.3 Sampling with cumulative method For the cumulative method, in accordance with the requirements of annual average, 24-h average and 8-h average, and different determination methods, consecutive or interval sampling can be conducted; the final result of interval sampling is expressed as a time-weighted average. Radon shall be sampled by the solid nuclear track measurement method. A.6 Sampling Records During sampling, the respond to on-site conditions, possible pollution sources, detection indicators, sampling date, time and location, number of sampling points, point layout modes, atmospheric pressure, temperature, relative humidity, wind velocity, sampling No. (sampling point, sampler and sampling tube, etc.) and sampling personnel shall be recorded in detail and delivered to the laboratory together with the samples. A.7 Sample Transportation and Storage After checking the samples in accordance with the sampling records, assign special personnel to transport the samples. During the transportation, the samples shall be effectively handled and protected, so as to prevent changes in components and contents due to the influence of physical, chemical, biological and other factors. After the samples arrive, they shall be handed over and registered with the reception personnel. Pay attention to the storage conditions and conduct laboratory tests in time. A.8 Determination Methods For the inspection of the various indicators of indoor air, the method specified in Table A.1 shall be preferably selected. Before use, method verification shall be performed in accordance with GB/T 32465.If the method specified in this document is not used, before use, the method shall be confirmed in accordance with GB/T 32465, and compared with the specified determination method, so as to ensure the consistency of the test results obtained by different determination methods. If there are two or more determination methods for the same indicator in this document, in accordance with different scopes of application, the corresponding determination method shall be selected. If the scope of application is the same, select the method in accordance with the technical conditions and actual situation, and the first method shall be taken as the arbitration method. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 18883-2022 be delivered?Answer: The full copy PDF of English version of GB/T 18883-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 18883-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18883-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 18883-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 18883-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18883-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 18883-2022?A step-by-step guide to download PDF of GB/T 18883-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 18883-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
