GB/T 18455-2022 PDF EnglishUS$185.00 · In stock · Download in 9 seconds
GB/T 18455-2022: Packaging recycling marking Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 18455: Historical versions
Similar standardsGB/T 18455-2022: Packaging recycling marking---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18455-2022NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 55.020 CCS A 80 Replacing GB/T 18455-2010 Packaging recycling marking Issued on. JULY 11, 2022 Implemented on. FEBRUARY 01, 2023 Issued by. State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 6 4 Packaging recycling marking... 7 5 Labeling requirements... 11 Annex A (informative) Examples of packaging recycling marking size... 13 Bibliography... 18ForewordThis document was drafted in accordance with the rules given in GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". This document replaces GB/T 18455-2010 "Package recycling marking". Compared with GB/T 18455-2010, in addition to the structural and editorial changes, the main technical changes are as follows. a) Change the application scope of the standard. Add "glass and consolidated packaging" in "Scope" (see Chapter 1 of this Edition, Chapter 1 of Edition 2010); b) Change the definition for "supplier". Delete "packaging components" and "consolidated packaging materials". Add three terms. "packaging material", "packaging component" and "consolidated packaging" (see Chapter 3 of this Edition, Chapter 3 of Edition 2010); c) Add the description of recycling marking for plastic products other than commonly used plastics and definition of single-material plastic packaging products (see 4.3.2, 4.3.3 of this Edition); d) Delete "recycling marking for biodegradable plastic packaging" (see 4.2.2 of Edition 2010); e) Change the recycling marking for "iron packaging". Add the recycling marking for "steel packaging" (see 4.4 of this Edition, 4.1 of Edition 2010); f) Add the recycling marking for "glass packaging" (see 4.5 of this Edition); g) Change the method for determining primary materials in consolidated packaging. Add the recycling marking for "consolidated packaging" (see 4.6 of this Edition, 4.3 of Edition 2010); h) Add "specifications and dimensions" of recycling marking (see 5.2 of this Edition); i) Add "color" of recycling marking (see 5.3 of this Edition); j) Change "quantity" of recycling marking (see 5.4 of this Edition, 5.2, 5.3 of Edition 2010); k) Add "position" of recycling marking (see 5.5 of this Edition); l) Change the "production" requirements for recycling marking (see 5.6 of this Edition, 5.5 of Edition 2010). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority shall not be held responsible for identifying any or all such patent rights. This document was proposed by and shall be under the jurisdiction of National Technical Committee on Packaging of Standardization Administration of China (SAC/TC 49). The drafting organizations of this document. Jiangsu Caihua Packaging Group Co., Ltd., Institute of Microbiology of Guangdong Academy of Sciences, Guangzhou Minghui Machinery Co., Ltd., Henan Yinjinda New Materials Co., Ltd., China Export Commodities Packaging Research Institute, Zhongshan Tiantu Fine Chemical Co., Ltd., Foshan Nanhai Lida Printing and Packaging Co., Ltd., Sichuan Yibin Plus Packaging Materials Co., Ltd., Jinan Quanhua Packaging Products Co., Ltd., Foshan Nanfang Packaging Co., Ltd., Hebei Shangdong Packaging Technology Co., Ltd., Guangdong Chaozhou Quality Measurement Supervision and Inspection Institute, Ganjiang New Materials Co., Ltd., Shandong Institute of Product Quality Inspection, Dongguan Mingfeng Packaging Co., Ltd., Jiaxing Xingyue Packaging Materials Co., Ltd., Jinan Dikerui Instrument Co., Ltd., Shanghai Ruoyi New Material Technology Co., Ltd., Jilin Provincial Institute of Product Quality Supervision and Inspection, Hangzhou Xingdian Packaging Materials Co., Ltd., Shanghai Ocean University, Guangdong Eurasian Packaging Co., Ltd., Shanghai Bojiang New Material Technology Co., Ltd., Shenzhen Yutong Packaging Technology Co., Ltd., Zhejiang Fangyuan Testing Group Co., Ltd., Donnelly (China) Investment Co., Ltd., China Packaging Federation, Xiamen Luhai Environmental Protection Co., Ltd., Qingdao Yongchang Plastic Industry Co., Ltd., Xinjiang Uygur Autonomous Region Product Quality Supervision and Inspection Research Institute, Jiangsu Tailai Packaging Engineering Group Co., Ltd., Zhanjiang Cigarette Packaging Materials Printing Co., Ltd., Hubei Beijing Shan Light Industry Machinery Co., Ltd., China Material Recycling Association, Chaozhou Chaoan District Meida Printing Industry Co., Ltd., Tianjin Huaheng Packaging Materials Co., Ltd., Shanghai University Jue Packaging Products Co., Ltd., Xiamen Jufu Plastic Products Co., Ltd., Fujian Kaida Group Co., Ltd. Main drafters of this document. Guo Zhenmei, Xia Yu, Wu Haijiao, Chen Guilan, Liu Guishen, Xue Haiyan, Zhong Jianchang, Luo Chaowei, Liang Gaojian, Zhang Qigang, Xing Wenbin, Gao Lingqiang, Wu Xiaoqing, Xu Yulin, Xing Xianqing, Yu Xiaoqin, Zhang Guixiang, Wang Canjun, Wu Fangping, Xu Chao, Lai Shijun, Hu Zhengyang, Li Li, Wang Tianyou, Qiu Kai, Deng Guirong, Ma Jing, Li Yuanyue, Mao Bing, Wei Liming, Qi Ji, Duan Jianyong, Song Zhifu, Zhang Yaoping, Li Yongfeng, Lan Xi, Huang Rong, Shen Jie, Cui Yan, Chen Mingzhe, Jiang Fengfeng, Wu Kunkun, Li Run Miao, Zhou Yang, Zhang Jian, Xie Yibin, Zhao Chunhua, Jiang Bin, Wang Yan, Fan Min, Guo Xubin, Liu Xiang, Xiong Lulu, Chen Jianchao, Guo Tao. Versions of standard substituted by this document are. - It was GB 18455-2001 that was issued in 2001 for the first time. The first revision was in 2010; - This is the second revision. Packaging recycling marking1 ScopeThis document specifies the types, basic graphics and labelling requirements for packaging recycling marking. This document applies to the design, production, trade and recycling of recyclable packaging containers, packaging products or packaging components such as paper, plastic, metal, glass and consolidated materials.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 16288, Marking of plastics products GB/T 16716.1, Packaging and the environment - Part 1.General rules GB/T 16716.2, Packaging and the environment - Part 2.Optimization of the packaging system3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. 3.1 supplier An operator responsible for packaging or packaged products placed on the market or delivered for use. NOTE. It refers to the owner of the product and its packaging before it is sold, or the manufacturer or seller indicated on the label, or more specifically, the operator who voluntarily implements this document. When the packaging used by the supplier is provided by other manufacturers, the supplier can trace the relevant technical information. 3.2 packaging material A general term for materials (such as. wood, metal, plastic, glass and paper) used to manufacture packaging containers and constitute product packaging. 3.3 packaging component Components of a package that can be disassembled by hand or by simple physical means. 3.4 consolidated packaging A package made of a composite material formed by laminating two or more layers of materials together.4 Packaging recycling marking4.1 Basic graphics See Table 1 for the names of commonly used packaging materials and the basic graphics of recycling marking. 4.2 Paper packaging The recycling marking for paper packaging products such as paper boxes and cartons consists of basic graphics and texts. An example of the recycling marking is shown in Figure 1. 4.3 Plastic packaging 4.4 Metal packaging The recycling marking for aluminium, iron and steel packaging products consist of basic graphics, letters and words. In addition to the letters in the steel packaging graphics using "ST", the letters in other graphics are chemical element symbols, located in the center of the graphics. "Aluminum", "Iron" or "Steel" can be marked below the graphics. The recycling markings are shown in Table 3. 4.5 Glass packaging The recycling marking for glass packaging container consists of basic graphics and letters. The "GL" in the graphic stands for "glass labelling", 4.6 Consolidated packaging Consolidated packaging is marked with a recycling marking for the primary material of all constituent materials. The main material refers to one or two materials with the largest proportion of mass in the consolidated material. Its recycling marking consists of basic graphics, letters and words.5 Labeling requirements5.1 Conditions that allow labeling Suppliers shall pre-assess whether the packaging containers or packaging components put on the market can be recycled according to GB/T 16716.1 and GB/T 16716.2.When it is determined that recycling is feasible, the packaging recycling marking shall be marked. 5.2 Specifications and dimensions The specifications of the packaging recycling marking shall be determined according to the product size. If it needs to be enlarged or reduced, it shall be enlarged or reduced equally according to the ratio given by the recycling marking. 5.3 Color Packaging recycling marking graphics shall be clear and eye-catching, not easy to fade and fall off. The printed recycling marking shall have sufficient contrast with the base color of the substrate. 5.4 Quantity 5.5 Position The position of the packaging recycling marking shall be located in a conspicuous place where the packaging is easily identifiable. The rectangular packaging recycling marking shall be located on the front or the lower part of the side of the packaging. T 5.6 Production Packaging recycling marking can be made by printing, spraying, labeling, molding. It shall not damage the performance of the product. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 18455-2022 be delivered?Answer: The full copy PDF of English version of GB/T 18455-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 18455-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18455-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 18455-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 18455-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18455-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 18455-2022?A step-by-step guide to download PDF of GB/T 18455-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 18455-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
