GB/T 18453.4-2023 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18453.4-2023: Cranes - Maintenance manual - Part 4: Jib cranes
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 18453.4-2023	359	Add to Cart	4 days	Cranes - Maintenance manual - Part 4: Jib cranes	Valid

Similar standards

GB/T 20062   GB/T 20303.1   GB/T 20303.5   GB/T 45374   GB/T 23723.5   

Basic data

Standard ID: GB/T 18453.4-2023 (GB/T18453.4-2023)
Description (Translated English): Cranes - Maintenance manual - Part 4: Jib cranes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J80
Classification of International Standard: 53.020.20
Word Count Estimation: 17,115
Date of Issue: 2023-05-23
Date of Implementation: 2023-12-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 18453.4-2023: Cranes - Maintenance manual - Part 4: Jib cranes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 53:020:20 CCSJ80 National Standards of People's Republic of China Crane Maintenance Manual Part 4: Jib cranes Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Representation method of manual 2 5 Maintenance 2 6 Lubricating and hydraulic fluids3 7 Safety measures for maintenance work 4 Appendix A (informative) Maintenance item example 5 Reference 12

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is part 4 of the Crane Maintenance Manual series of standards: The following parts of this series of standards have been published: --- Part 1: General; --- Part 4: Jib cranes: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the Ministry of Transport of the People's Republic of China: This document is under the jurisdiction of the National Hoisting Machinery Standardization Technical Committee (SAC/TC227): This document was drafted by: Water Transport Research Institute of the Ministry of Transport, Tianjin Port (Group) Co:, Ltd:, Shanghai Maritime University, Yang Ge Technology Co:, Ltd: Co:, Ltd:, Taiyuan University of Science and Technology, Shanghai Zhenhua Heavy Industry (Group) Co:, Ltd:, Wuhan Gangdi Intelligent Technology Co:, Ltd:, Shandong Luhai Heavy Industry Co:, Ltd:, Weite Technology Co:, Ltd:, Dalian University of Technology: The main drafters of this document: Ning Weiting, Zhang Dewen, Wang Xuan, Mei Xiao, Yang Guangping, Wen Hao, Zhou Huiqin, Zhang Tao, Chen Yanping, Liu Long, Dong Dashan, Sun Lijie, Miao Wenfeng, Wu Qiang, Liu Yan, Teng Rumin, Wang Quanwei, Zhang Xinrui, Shi Liangzhong, Huang Wendong, Cai Xiaoyu, Zhao Wei:

Introduction

Jib cranes are widely used in ports, shipyards and equipment manufacturing, hydropower construction, nuclear power construction, railways, bridges and other fields: according to The ISO /TC96 standard system divides cranes into four categories: mobile cranes, tower cranes, jib cranes, bridge and gantry cranes: Category, the "Crane Maintenance Manual" series standards are proposed to be composed of five parts: --- Part 1: General: The purpose is to specify the general requirements for the presentation method and content of crane maintenance manuals: --- Part 2: Mobile cranes: The purpose is to specify the general requirements for the expression method and content of mobile crane maintenance manuals: --- Part 3: Tower cranes: The purpose is to specify the general requirements for the expression method and content of the tower crane maintenance manual: --- Part 4: Jib cranes: The purpose is to specify the general requirements for the expression method and content of the jib crane maintenance manual: --- Part 5: Bridge and gantry cranes: The purpose is to specify the expression method and content of maintenance manuals for bridge and gantry cranes General requirements: Crane Maintenance Manual Part 4: Jib cranes

1 Scope

This document specifies the expression method, maintenance, lubrication and hydraulic oil, safety measures for maintenance operations, etc: of the jib crane maintenance manual General requirements for writing: This document applies to the preparation of maintenance manuals for jib cranes defined in GB/T 6974:4:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 18453-2001 Crane Maintenance Manual Part 1: General Rules GB/T 31052:1-2014 Inspection and Maintenance Procedures for Lifting Machinery Part 1: General Rules

3 Terms and Definitions

The following terms and definitions apply to this document: 3:1 maintenance A series of work performed to maintain or restore the crane to a state capable of performing its specified functions: Note 1: Maintenance is divided into planned maintenance and unplanned maintenance: Note 2: Maintenance work includes maintenance and repair: [Source: GB/T 31052:1-2014, 3:5, modified] 3:2 In order to ensure the normal and safe operation of the crane, the necessary work is carried out according to the plan: Note: Maintenance includes cleaning, lubrication, fastening, adjustment, anti-corrosion, etc: [Source: GB/T 31052:1-2014, 3:6, modified] 3:3 repair repair For daily or abnormal reasons that cause equipment damage and failure that affect the normal operation of the crane, repair or replace the damaged A series of work to restore the function of the equipment: [Source: GB/T 31052:1-2014, 3:7] 3:4 planned maintenance planned maintenance In order to reduce the probability of crane failure or performance degradation, maintenance is carried out according to the established periodic table and corresponding specifications: [Source: GB/T 31052:1-2014, 3:8] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18453.4-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18453.4-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18453.4-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18453.4-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.