GB/T 23723.5-2025 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23723.5-2025: Cranes - Safe use - Part 5: Bridge and gantry cranes Status: Valid
Basic dataStandard ID: GB/T 23723.5-2025 (GB/T23723.5-2025)Description (Translated English): Cranes - Safe use - Part 5: Bridge and gantry cranes Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J80 Classification of International Standard: 53.020.20 Word Count Estimation: 14,132 Date of Issue: 2025-01-24 Date of Implementation: 2025-08-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 23723.5-2025: Cranes - Safe use - Part 5: Bridge and gantry cranes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 53.020.20 CCSJ80 National Standard of the People's Republic of China Safe use of cranes Part 5.Bridge and gantry cranes Released on 2025-01-24 2025-08-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Safe working system 1 5 Personnel competencies and responsibilities 2 6 Security 3 7 Selection of cranes 5 8 Crane Setup 5 9 Installation and removal 6 10 Working procedures and safety precautions 6 11 Working Condition 7 12 Lifting and load handling 8 13 Testing, inspection and condition monitoring 8 14 Evaluation and Retirement 8ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 5 of GB/T 23723 "Safe use of cranes". GB/T 23723 has been published in the following parts. --- Part 1.General; --- Part 3.Tower cranes; --- Part 4.Jib cranes; --- Part 5.Bridge and gantry cranes. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lifting Machinery (SAC/TC227). This document was drafted by. Beijing Kezhengping Engineering Technology Testing Institute Co., Ltd., Beijing Hoisting and Conveying Machinery Design and Research Institute Co., Ltd. Shanghai Zhenhua Heavy Industries Co., Ltd., Shanghai Jinyi Testing Technology Co., Ltd., Zhejiang Seaport Investment and Operation Group Co., Ltd. China Yangtze Power Co., Ltd., Taiyuan Heavy Industry Co., Ltd., Zhejiang Special Equipment Science Research Institute, Shanghai Special Equipment Supervision and Inspection Technology Research Institute, Henan Weihua Heavy Machinery Co., Ltd., Henan Mining Crane Co., Ltd., Hangzhou Guodian Machinery Equipment Design Research Institute Co., Ltd., Zhejiang China Construction Road and Bridge Equipment Co., Ltd., Eurocrane Heavy Industries Co., Ltd., Dalian Borui Heavy Industries Co., Ltd., Zhongantai Safety Technology Co., Ltd., Nanjing Special Equipment Safety Supervision and Inspection Institute, Ningbo Special Equipment Inspection Institute, Sany Hai Yangzhou Heavy Industry Co., Ltd., Jiangxi Hoisting Machinery General Factory Co., Ltd., Henan Dafang Heavy Machinery Co., Ltd., Qingdao Qianwan Container Terminal Co., Ltd. Limited Liability Company, Taizhou Branch of Jiangsu Special Equipment Safety Supervision and Inspection Institute, Weite Technology Co., Ltd., Henan Institute of Science and Technology, Guangdong Province Shunde Testing Institute of Special Equipment Testing Institute, Zhengzhou Xindafang Heavy Industry Technology Co., Ltd., Henan Xinke Crane Co., Ltd., Hubei Yichang Branch of Special Equipment Inspection and Testing Institute, Beijing Beiqiyiouti Intelligent Technology Co., Ltd., Henan Zhengda Hoisting Equipment Co., Ltd., Nanjing Switchgear Co., Ltd., Shandong Shenzhou Machinery Co., Ltd., Zhangjiagang Branch of Jiangsu Special Equipment Safety Supervision and Inspection Institute, Ningbo Daxie Container Terminal Co., Ltd., China Railway 11th Bureau Group Hanjiang Heavy Industry Co., Ltd., Qingdao Port Equipment Manufacturing Co., Ltd., Xi'an Special Equipment Inspection and Testing Institute, China Railway Seventh Bureau Group Wuhan Engineering Co., Ltd., China Construction Sixth Bureau (Suzhou) Construction Engineering Co., Ltd., China Communications Construction Road and Bridge Huadong Engineering Co., Ltd., China Railway No. 9 Bridge Engineering Co., Ltd., Ningbo Beilun Third Container Terminal Co., Ltd., China Communications Construction Road and Bridge Construction Co., Ltd. company. The main drafters of this document are. Bian Shujun, Lu Jianhu, Liu Wusheng, Xu Wenbin, Li Jicheng, Zhang Pei, Lin Weiguo, Feng Hualong, He Xiaoping, Zhou Liangliang, Wang Xinjing, Jiang Jianfeng, Xu Haixiang, Cui Peng, Fu Yixiao, Huang Jingen, Tong Jucang, Yuan Xiufeng, Li Ning, Zhou Guoyi, Wang Shuang, Zhang Yiyi, Liu Munan, Zou Xudong, Cao Xiangyang, Liu Yang, Xu Feng, Xie Bangtian, Nie Fuquan, Wen Qingshan, Dai Yu, Sun Detao, Cai Xiaojie, Deng Daijun, Sun Cheng, Hu Jianhong, Wu Yiguo, He Hui, Zhang Weibin, Liu Da, Liu Xiao, Sun Hua, Li Hongchang, Wang Xueqiang, Qiu Feng, Zhou Jijun, Liang Hui, Zhang Hailong, Zhong Xiaohui, and Zhang Fenghuang.IntroductionThis document is formulated to regulate the safe use of bridge and gantry cranes in my country and to reduce safety accidents involving bridge and gantry cranes. GB/T 23723 "Safety in the Use of Cranes" is planned to consist of 5 parts. --- Part 1.General principles. The purpose is to specify the general principles for the safe use of cranes. --- Part 2.Mobile cranes. The purpose is to specify the requirements for the safe use of mobile cranes. --- Part 3.Tower cranes. The purpose is to specify the requirements for the safe use of tower cranes. --- Part 4.Jib cranes. The purpose is to specify the requirements for the safe use of jib cranes. --- Part 5.Bridge and gantry cranes. The purpose is to specify the requirements for safe use of bridge and gantry cranes. Safe use of cranes Part 5.Bridge and gantry cranes1 ScopeThis document specifies the safe work system for bridge and gantry cranes, personnel competence and responsibilities, safety, crane selection, crane Installation, installation and disassembly, working procedures and safety precautions, working conditions, lifting and load handling, testing, inspection and condition monitoring, evaluation Safety use requirements such as evaluation and scrapping. This document applies to bridge and gantry cranes defined in GB/T 6974.5. This document does not apply to human-driven (not power-driven) bridge and gantry cranes.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2893 (all parts) Graphical symbols, safety colors and safety signs GB/T 5082 Crane hand signals GB/T 6974.1 Crane terminology Part 1.General terms GB/T 6974.5 Crane terminology Part 5.Bridge and gantry cranes GB/T 15052 General principles for crane safety signs and hazard graphic symbols GB/T 20303.1 Crane cab and control station Part 1.General GB/T 20303.5 Crane operator's cab and control station Part 5.Bridge and gantry cranes GB/T 22416.1-2008 Crane maintenance Part 1.General GB/T 23722 Qualification requirements for crane drivers (operators), riggers, commanders and assessors GB/T 23723.1-2009 Safe use of cranes Part 1.General principles GB/T 36697 Scrap conditions for casting cranes GB 39800.1 Specification for personal protective equipment Part 1.General GB/T 41098 Crane safety lifting equipment GB/T 41510 General requirements for safety assessment of lifting machinery3 Terms and definitionsThe terms and definitions defined in GB/T 6974.1, GB/T 6974.5 and GB/T 23723.1-2009 apply to this document. 4.Safety work system 4.1 The user shall determine the type and complexity of the bridge crane and gantry crane (hereinafter referred to as “crane”) used, as well as the specific The safety work system should comply with the requirements of 4.1 of GB/T 23723.1-2009. It shall also meet the requirements of 4.2 to 4.8. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23723.5-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 23723.5-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23723.5-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23723.5-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
