GB/T 1845.2-2021 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1845.2-2021: Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Status: Valid

GB/T 1845.2: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1845.2-2021	359	Add to Cart	4 days	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties	Valid
GB/T 1845.2-2006	439	Add to Cart	3 days	Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties	Obsolete

Similar standards

GB/T 1844.2   GB/T 1844.1   GB/T 1844.3   GB/T 1845.1   

Basic data

Standard ID: GB/T 1845.2-2021 (GB/T1845.2-2021)
Description (Translated English): Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G31
Word Count Estimation: 18,180
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 1845.2-2021: Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2.Preparation of test specimens and determination of properties ICS 83.080.20 CCSG31 National Standards of People's Republic of China Replace GB/T 1845.2-2006 Plastic polyethylene (PE) molding and extrusion materials Part 2.Sample preparation and performance measurement (ISO 17855-2.2016,MOD) Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 2 of GB/T 1845 "Plastic Polyethylene (PE) Molding and Extrusion Materials". GB/T 1845 has been released The following parts. ---Part 1.Naming system and classification basis; ---Part 2.Sample preparation and performance measurement. This document replaces GB/T 1845.2-2006 "Plastic Polyethylene (PE) Molding and Extrusion Materials Part 2.Sample Preparation and Performance Compared with GB/T 1845.2-2006, except for structural adjustments and editorial changes, the main technical changes are as follows. a) Add "In Table 3 and Table 4, when the injection molding method is used to prepare the samples separately, the injection molding method is used for all materials in the melt flow rate range. Requirements for "plastic specimens" (see 4.3, 3.2 of the.2006 edition); b) Amend "Table 3 and Table 4 separately specify that when the compression molding method is used to prepare samples, the compression molding method is used for all materials in the range of melt flow rate. Requirements for "plastic specimens" (see 4.4, 3.3 of the.2006 edition); c) State adjustment time "at least 40h but not more than 96h" is modified to "at least 16h but not more than 96h" (see Chapter 5, Chapter 4 of the.2006 edition); d) The standard environment of the test is specified separately for the filled sample and the unfilled sample (see Chapter 6, Chapter 5 of the.2006 edition); e) The standard environmental relative humidity of the test "50%±5%" is modified to "50%±10%" (see Chapter 6, Chapter 5 of the.2006 edition); f) The items of mold shrinkage and glass transition temperature have been added to the general performance (see Table 3, Table 3 of the.2006 edition); g) The size of the combustible sample is divided into two types. thickness 1.5mm and thickness greater than 1.5mm (see Table 3,.2006 edition of Table 3); h) The size of the electrical strength sample is modified to "≥60×≥60×1" (see Table 3,.2006 edition of Table 3); i) The size of the comparative tracking index sample is modified to "≥20×≥20×4" (see Table 3,.2006 edition of Table 3); j) The samples for relative permittivity, dielectric loss factor, resistivity and electrical strength are modified to compression molding preparation (see Table 3,.2006 edition table 3); k) The additional performance adds the use of small tensile specimens for tensile testing (see Table 4); l) The item of brittleness temperature is added to the additional performance (see Table 4). This document uses the redrafting method to modify and adopt ISO 17855-2.2016 Plastic Polyethylene (PE) Molding and Extrusion Materials Part 2 Sub. Sample Preparation and Performance Measurement. Compared with ISO 17855-2.2016, this document has made the following structural adjustments. A chapter "Terms and Definitions" has been added to this document. Compared with ISO 17855-2.2016, this document has technical differences. The main technical differences and their reasons are as follows. ---Regarding the normative reference documents, this document has made adjustments with technical differences to adapt to the technical conditions of our country. Adjustment The situation is collectively reflected in Chapter 2 "Normative Reference Documents". For specific adjustments, see Appendix A; ---Add "In Table 3 and Table 4, when the injection molding method is used to prepare the sample separately, the injection molding method is used for all materials in the melt flow rate range. The requirements of “plastic specimen” to make the standard regulations more clear (see 4.3); --- Amend "Table 3 and Table 4 separately indicate that when preparing samples by compression molding method, all materials in the range of melt flow rate shall be compressed. "Plastic sample" requirements to make the standard regulations more clear (see 4.4); ---Added the standards that the sample state adjustment and test environment should meet to make the standard provisions more clear (see Chapter 5 and Chapter 6); ---The state adjustment time "at least 16h" is modified to "at least 16h but not more than 96h" to make the standard provisions more reasonable (see Chapter 5); --- In the general performance, the penetration energy and maximum penetration force sample size increased by ϕ60×2 discs, in line with the requirements of the method standard (see Table 3); ---In the general performance, increase the requirement that the density sample is taken from the middle part of the injection molded or compression molded sample to make the standard provisions more clear (see table 3); ---The item of brittleness temperature is added to the additional performance, so that the standard requirements can meet the requirements of use (see Table 4); --- Modify the additional performance density test standards to make the standard provisions more reasonable (see Table 4). This document has also made the following editorial changes. ---The symbol of nominal strain at tensile fracture is modified to "εtb", the symbol of tensile fracture stress is modified to "σb", and the symbol of tensile fracture strain is modified to "Εb", the penetrating energy symbol is modified to "EP" (see Table 3); ---Delete ISO 17855-2.2016 informative appendix A "Density comparison test carried out in accordance with ISO 1183-1 immersion method". This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15). Drafting organizations of this document. Beijing Yanshan Petrochemical High-Tech Technology Co., Ltd., China Petroleum & Chemical Corporation Beijing Yanshan Branch Company, China Petroleum & Chemical Corporation Qilu Branch, Shandong Dawn Polymer Materials Co., Ltd., and China Petroleum & Chemical Corporation Limited company Tianjin Petrochemical Branch, China Petroleum & Chemical Corporation Yangzi Petrochemical Branch. The main drafters of this document. Wang Xiaoli, Cui Guanghong, Cheng Zhiling, Hao Wenpeng, Zheng Huiqin, Cheng Hong, Wei Wenxue, Liang Yahui, Pang Haiping, Zhao Lei, Wu Yanjin. This document was first published in.2006, and this is the first revision.

Introduction

GB/T 1845 is the basic standard for the classification and naming of polyethylene resins, sample preparation and performance determination. Provided support. The revision of this standard adopts the ISO series of standards. Due to the changes in the guidelines of the ISO standard, the naming system has The test method standards closely related to equipment and performance measurement have been revised, and there are technical differences, so this series of standards are revised. GB/T 1845 "Plastic Polyethylene (PE) Molding and Extrusion Materials" consists of two parts. ---Part 1.Naming system and classification basis; ---Part 2.Sample preparation and performance measurement. This document is Part 2 of GB/T 1845.This document specifies the preparation of compression moulding and injection moulding samples for polyethylene moulding and extrusion materials Conditions, items, methods, procedures and test conditions for performance measurement, as well as the treatment of test materials and materials before molding and samples before testing The requirements of state adjustment. All the provisions of sample preparation, condition adjustment, sample size and test conditions are to make the test results have Reproducibility and comparability, with a platform for data comparison. Plastic polyethylene (PE) molding and extrusion materials Part 2.Sample preparation and performance measurement

1 Scope

This document specifies the methods and conditions for the preparation and performance determination of polyethylene (PE) molding and extrusion material samples. This document also provides Requirements for pretreatment of test materials and state adjustment of samples before testing. This document is suitable for characterizing the performance of polyethylene molding and extrusion materials and the selection of test methods. These properties are from GB/T 19467.1 Selected in general test methods. This document also lists other test methods that are widely used or have special significance for molding and extrusion materials. And the measurement method of naming performance in Part 1. In order to ensure the reproducibility and repeatability of the test results, the method of sample preparation and condition adjustment specified in this document can be used, as well as the regulations. Determine the sample size and test method. The test data obtained by using specimens prepared under different conditions or using specimens of different sizes may not Unanimous.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 1033.1 Determination of the density of plastic non-foam plastics Part 1.Immersion method, liquid pycnometer method and titration method (GB/T 1033.1-2008, ISO 1183-1.2004, IDT) GB/T 1033.2 Determination of the density of plastic non-foam plastics Part 2.Density gradient column method (GB/T 1033.2-2010, ISO 1183-2.2004, MOD) GB/T 1033.3 Determination of the density of plastic non-foam plastics Part 3.Gas pycnometer method (GB/T 1033.3-2010, ISO 1183-3.1999, IDT) GB/T 1034 Determination of Water Absorption of Plastics (GB/T 1034-2008, ISO 62.2008, IDT) GB/T 1040.2 Determination of tensile properties of plastics Part 2.Test conditions for molding and extrusion plastics (GB/T 1040.2- 2006, ISO 527-2.1993, IDT) GB/T 1043.1 Determination of impact performance of plastic simply supported beams Part 1.Non-instrumented impact test (GB/T 1043.1- 2008, ISO 179-1..2000, IDT) GB/T 1043.2 Determination of impact performance of plastic simply supported beams Part 2.Instrumental impact test (GB/T 1043.2- 2018, ISO 179-2.1997, IDT) GB/T 1408.1 Insulating material electric strength test method Part 1.Test under power frequency (GB/T 1408.1-2016, IEC 60243-1.2013, IDT) GB/T 1409 measures the permittivity and dielectric loss factor of electrical insulating materials at power frequency, audio frequency, and high frequency (including meter wave wavelength) Recommended method (GB/T 1409-2006, IEC 60250.1969, MOD) GB/T 1632.3 Plastics use capillary viscometer to determine the viscosity of polymers in dilute solutions. Part 3.Polyethylene and polypropylene (GB/T 1632.3-2010, ISO 1628-3.2001, MOD) GB/T 1634.2 Determination of plastic load deformation temperature Part 2.Plastics and hard rubber (GB/T 1634.2-2019, ISO 75-2.2013, MOD) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1845.2-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1845.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1845.2-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1845.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 1845.2-2021?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1845.2-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.