GB/T 1844.1-2022 PDF EnglishUS$410.00 · In stock · Download in 9 seconds
GB/T 1844.1-2022: Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 1844.1: Historical versions
Similar standardsGB/T 1844.1-2022: Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1844.1-2022 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.080.01 CCS G 31 Replacing GB/T 1844.1-2008 Plastics - Symbols and abbreviated terms - Part 1.Basic polymers and their special characteristics (ISO 1043-1.2011, MOD) Issued on: OCTOBER 12, 2022 Implemented on: OCTOBER 12, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 6 4 Use of symbols and abbreviated terms... 7 5 Abbreviated terms for homopolymers, copolymers and natural polymers... 7 6 Symbols for indication of special characteristics... 15 7 Symbol for plastics recycled... 18 8 Examples of the use of symbols... 18 Annex A (informative) Guide for preparing new abbreviated terms for basic polymers, mixtures of polymers and related terms... 20 Annex B (informative) List of symbols used for components of abbreviated terms.. 22 Annex C (informative) Abbreviated terms for plastics grouped by type... 27 Bibliography... 31ForewordThis document was drafted in accordance with the rules given in GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". This document is Part 1 of GB/T 1844 "Plastics - Symbols and abbreviated terms". The following parts of GB/T 1844 have been issued. - Part 1.Basic polymers and their special characteristics; - Part 2.Fillers and reinforcing materials; - Part 3.Plasticizers; - Part 4.Tables of hardness values. This document replaces GB/T 1844.1-2008 "Plastics - Symbols and abbreviated terms - Part 1.Basic polymers and their special characteristics". Compared with GB/T 1844.1- 2008, in addition to the structural adjustments and editorial modifications, the main technical changes in this document are as follows. - Add abbreviations HBV, PBS, PBSA, PCO, PES, PHA, PHB, PLA, PS-S, PS-ST (see Clause 5 of this Edition); - Add symbols A (adipic acid) and ST (syndiotactic) indicating characteristic properties. Delete the symbols E (elastomer) and H (homogeneous) indicating characteristic properties (see Clause 6 of this Edition; Clause 6 of Edition 2008); - Add symbols for recycled plastics (see Clause 7 of this Edition). The modification of this document uses ISO 1043-1.2011 "Plastics - Symbols and abbreviated terms - Part 1.Basic polymers and their special characteristics". The technical differences between this document and ISO 1043-1.2011 and their reasons are as follows. - In Clause 1, add the content of "applicable limits" to comply with the provisions of GB/T 1.1-2020; - Use normative reference GB/T 2035 to replace ISO 472 (see Clause 3) to adapt to the technical conditions in China. The following editorial changes have been made to this document. - Incorporate the amendments of ISO 1043-1.2011/AMD 1.2016.The outer margins of the clauses covered are marked with vertical double lines (ǁ);4 Use of symbols and abbreviated terms4.1 Abbreviated terms for homopolymers, copolymers and natural polymers are given in Clause 5, symbols for special characteristics are given in Clause 6, the symbol for plastics recycled is given in Clause 7, and examples of the use of symbols are given in Clause 8. 4.2 Additional symbols and guidelines for their use are provided to distinguish the essential molecular characteristics of a given general plastic material. If they are difficult to distinguish, the use of such symbols describing performance shall be avoided to avoid confusion. 4.3 The abbreviated terms are primarily intended to be a convenient shorthand for chemical names in publications and other written matter. The abbreviated terms are also useful for indicating the type of basic polymer in materials and products, such as ABS moulding material, PA film, PE sheeting and PVC pipe. 4.4 Only capital letters shall be used for symbols and abbreviated terms. 4.5 When an abbreviation appears for the first time in the text, the corresponding term shall be stated in full, followed by the corresponding abbreviation in parentheses. 4.6 When the prefix "poly" is used with the English names of multiple monomers, the International Union of Pure and Applied Chemistry (IUPAC) rules for traceable naming of polymers recommend the use of brackets. NOTE. This document adopts this rule, but in ordinary use the parentheses are often omitted. 4.7 It is not the purpose of this document to systematize polymer abbreviations in a formal manner. In the field of natural and synthetic polymers, terminology and formula names for scientific literature are carefully developed by the IUPAC Macromolecular Nomenclature Committee. In general, abbreviations used in this document are generally consistent with abbreviations published by the committee.5 Abbreviated terms for homopolymers, copolymers and naturalpolymers The following list gives the preferred abbreviated terms for plastics materials, using the component symbols given in Annex B. For some established materials, the abbreviated terms are supplemented by symbols for special characteristics as defined in Clause 6. Other abbreviations for certain polymers often occur and are listed after the material name for ease of reference. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 1844.1-2022 be delivered?Answer: The full copy PDF of English version of GB/T 1844.1-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 1844.1-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1844.1-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1844.1-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 1844.1-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1844.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 1844.1-2022?A step-by-step guide to download PDF of GB/T 1844.1-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 1844.1-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
