GB/T 17304-2009 English PDF

US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17304-2009: Specification for CAD general technology
Status: Valid

GB/T 17304: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 17304-2009	649	Add to Cart	5 days	Specification for CAD general technology	Valid
GB/T 17304-1998	919	Add to Cart	6 days	Specification for CAD general technology	Obsolete

Similar standards

GB/T 38633   GB/T 38666   GB/T 38672   GB/T 45228   GB/T 45241   GB/T 45341   

Basic data

Standard ID: GB/T 17304-2009 (GB/T17304-2009)
Description (Translated English): Specification for CAD general technology
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L67
Classification of International Standard: 35.240.50
Word Count Estimation: 28,236
Date of Issue: 2009-05-06
Date of Implementation: 2009-11-01
Older Standard (superseded by this standard): GB/T 17304-1998
Quoted Standard: GB/T 13016
Regulation (derived from): Announcement of Newly Approved National Standards No. 6, 2009 (No. 146 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides a common CAD technology standardized content and technology should be used to achieve a common CAD standards. This standard applies to CAD software development, product design and CAD CAD technology application conformance testing, but also for other related field reference.

GB/T 17304-2009: Specification for CAD general technology

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for CAD general technology ICS 35.240.50 L67 National Standards of People's Republic of China Replacing GB/T 17304-1998 CAD General technical specifications Posted 2009-05-06 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 3.1 Terms and definitions 3.2 Abbreviations 1 Overview 4 1 5 CAD software development 2 5.1 computer graphics systems standard 2 5.2 CAD Technical Drawing Standard 2 5.3 Product technical standards for data 3 5.4 CAD file management and archiving standard 3 5.5 Other standard 4 5.6 Related Standards 4 6 CAD Technology 5 6.1 CAD Technical Drawing Standard 5 6 6.2 Product technical standards for data 6.3 CAD electronic documents and archiving standards 6 6.4 Other criteria 6 6.5 Related Standards 7 7 7 Conformance Testing 7.1 The basic principles and methods Standard 7 7.2 CAD Technical Drawing Standard 7 7.3 Product technical standards for data 8 7.4 CAD Chinese system standard 8 7.5 CAD file storage system standard 8 7.6 computer graphics system standard 8 Appendix A (Informative Appendix) CAD universal standard framework 10 Appendix B (Informative Appendix) CAD General Standard Listing 13 Annex C (informative) standardization trends CAD 17 References 22

Foreword

This standard replaces GB/T 17304-1998 "CAD General technical specifications." This standard and GB/T 17304-1998 major change compared to Of the following. --- Amend the foreword; --- Increased introduction; --- According to GB/T 1.1-2000 requirements of Chapter 2 has been modified; --- The GB/T 17304-1998 in Chapters 3 and 4 are combined into Chapter 3; --- 5.2.3 modify the contents; --- 5.4.3 modify the contents; --- 5.6.1.3 modified contents; --- 5.6.2.3 modified contents; --- Revised Appendix B B. Content 5; --- Revised Appendix B B. Content 6; --- Revised Appendix C content. --- CAD technology applications; --- CAD conformance testing. The three parts of the standard should be implemented in the case of overlap, but the angle of the standard consumer standard of interest is different. Such as CAD drawings concerned enterprise software to draw compliance with national technical drawing standard, developers will focus on technical details of each How to achieve standards. Therefore, this standard different sections will be repeated the same content, but will be in the description of each part of the application With emphasis on the application will be described. Due to the special nature of this standard, it listed a number of national and international standards and CAD-related in its content. These standards National Library of Standards Administration of Quality Supervision, Inspection and Quarantine belongs can be found. CAD General technical specifications

1 Scope

This standard provides standardized content CAD common technology and common standards of CAD technology should be used. This standard applies to CAD software development, product design and application of CAD technology CAD conformance testing, but also for other relevant areas Domain reference.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 13016 standard system preparation principles and requirements 3 Terms, definitions and abbreviations 3.1 Terms and Definitions The following terms and definitions apply to this standard. 3.1.1 Test test product treated in accordance with the specific features of the standard set forth in order to determine the degree of consistency of the product as the consistency of implementation. [GB/T 16656.31-1997] 3.1.2 Data sets and programs are identified, it can generate a set of parts information. [GB/T 17645.1-2008] 3.1.3 In the formal description of product data technology and data products on the exchange of information. Note. The "Product data representation and exchange" is the official name of ISO 10303. Correspondingly, our standard number is GB/T 16656. The standard has a Widely used but unofficial name. product model data exchange standards StandardfortheExchangeofProductModelData (STEP) 3.2 Acronyms The following abbreviations apply to this standard. CAD. Computer Aided Design ComputerAidedDesign CAx. Computer Aided Test Tool ComputerAidedTools PLIB. Library PartsLibrary STEP. product model data exchange standards StandardfortheExchangeofProductModelData

4 Overview

This standard consists of three parts, namely the development of CAD software, CAD and CAD technology application compliance testing. For ease of explanation, rationale Solutions, references, and the use of this standard, the above various parts of the standard adopted a unified narrative, consists of the following components. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17304-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17304-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17304-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17304-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 17304-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17304-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.