Home   Cart   Quotation   Policy   About-Us
www.ChineseStandard.net
SEARCH

GB/T 17095-1997 PDF English

US$110.00 · In stock · Download in 9 seconds
GB/T 17095-1997: Hygienic standard for inhalable particulate matter in indoor air
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 17095-1997110 Add to Cart Auto, 9 seconds. Hygienic standard for inhalable particulate matter in indoor air  

Similar standards

GB/T 18204.1   GB 18078.1   GB/T 18202   GB/T 11730   

GB/T 17095-1997: Hygienic standard for inhalable particulate matter in indoor air

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17095-1997
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.0404.20 C 51 Hygienic Standard for Inhalable Particulate Matter in Indoor Air APPROVED ON: NOVEMBER 11, 1997 IMPLEMENTED ON: DECEMBER 1, 1998 Issued by: State Bureau of Technical Supervision

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Definitions ... 4 3 Sanitary Requirements ... 4 4 Supervision and inspection ... 4 Appendix A (Normative) Method for Determination of Inhalable Particulate Matter in Indoor Air - Impacting Weighting Method ... 5

Foreword

Urban and rural residents spend 70% of their time indoors, therefore the quality of the indoor air is closely related to their health. The formulating staffs prepared this standard on the base of the scientific achievements (data) in the indoor air pollution and health effect of urban and rural residents in China, by reference to the hygienic standard for inhalable particles in ambient air of residential areas specified in GB 11667-89. This standard adopts the relevant requirements on the grain size specified in GB 11667-89 "Hygienic Standard for Inhalable Particles in Ambient Air of Residential Areas". The average concentration value hereof is determined according to the current concentration level, toxicity, and possibility in China. The daily average maximum allowable concentration stated by this standard is based on the human health hazard level, and specified relatively strictly, but thus value target can be reached with efforts, and enforced gradually. This standard was implemented on December 1, 1998. Appendix A in this standard is normative. This standard was proposed by the Ministry of Health of the People's Republic of China. The Environmental Health and Sanitary Engineering Institute of the China Academy of Preventive Medicine is responsible for drafting this standard. Chief drafting staffs: Cao Shouren, Wang Juning, Ji Rongdi, Zhang Yue. The technical jurisdiction department Chinese Academy of Preventive Medicine, entrusted by Ministry of Public Health, is in charge of the interpretation of this standard. Hygienic Standard for Inhalable Particulate Matter in Indoor Air

1 Scope

This standard specifies the requirements on daily average maximum allowable concentration and sampler for inhalable particulate matter in indoor air. This standard is applicable to monitoring and evaluating the indoor air but productive indoor environment.

2 Definitions

For the purposes of this standard, the following definitions apply. 2.1 Inhalable particulate matter It refers to particulate with a mass median diameter of 10μm (D50=10μm) that can access to respiratory tract. 2.2 Aerodynamic diameter It refers to the diameter of the particulate with same end fall rate with the unit density bulb in low-Reynolds-number gas flow.

3 Sanitary Requirements

The daily average maximum allowable concentration of inhalable particulate matter in indoor air is 0.15 mg/m3, and the mass median diameter is 10 μm.

4 Supervision and inspection

4.1 Sampler: D50≤10±1μm; geometrical standard deviation δg=1.5±0.1. 4.2 The method for determination of inhalable particulate matter in indoor air is detailed in Appendix A (Normative).

Appendix A

(Normative) Method for Determination of Inhalable Particulate Matter in Indoor Air - Impacting Weighting Method A1 Principle Collect the particulates with a size of larger than or equal to 10μm with a two-section inhalable particulate matter sampler (D50=10μm, δg=1.5) at a flow rate of 13 L/min , to the glass fibre filter on the impact plate; collect the particulates with a size of smaller than or equal to 10μm onto a glass fibre filter of constant weight; weigh the mass of the particulates, divide the mass of the particulates with a size of 10μm by the sampling standard volume, leaving the concentration of the inhalable particulate matter. The inspection lower limit is 0.05 mg. A2 Instrument A2.1 Inhalable particulate matter sampler: D50≤10±1μm, geometrical standard deviation δg=1.5±0.1. A2.2 Balance: 1/10000 or 1/100000. A2.3 Soap-film flowmeter. A2.4 Stopwatch. A2.5 Glass fibre filter: 50mm in diameter; 53mm in external-cycle diameter or 40mm in inner-cycle diameter. A2.6 Dryer. A2.7 Tweezers. A3 Flowmeter Calibration Calibrate the sampler flowmeter with the soap-film flowmeter; connect the flowmeter, the soap-film meter and the air pump as shown in Figure A1 and conduct the calibration; record the volume (mL) and the passing time of the soap-film meter between two scales; convert the above volume to the volume (Vs) under the normal condition according to Formula (A1); and draw the flow-scale curve (figure). ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 17095-1997 be delivered?Answer: The full copy PDF of English version of GB/T 17095-1997 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 17095-1997_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17095-1997_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17095-1997 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 17095-1997?

A step-by-step guide to download PDF of GB/T 17095-1997_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17095-1997".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9