GB/T 1687.4-2021 English PDF

US$344.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1687.4-2021: Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1687.4-2021	344	Add to Cart	3 days	Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer	Valid

Similar standards

GB/T 1683   GB/T 1689   GB/T 1690   GB/T 1685.2   GB/T 1687.3   GB/T 1687.1   

Basic data

Standard ID: GB/T 1687.4-2021 (GB/T1687.4-2021)
Description (Translated English): Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G40
Word Count Estimation: 20,282
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 1687.4-2021: Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4.Constant-stress flexometer ICS 83.060 CCSG40 National Standards of People's Republic of China Temperature rise and fatigue resistance of vulcanized rubber in flexural test Determination of performance. Part 4.Constant stress flexural test (ISO 4666-4.2018, IDT) Released on 2021-10-11 2022-05-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is part 4 of GB/T 1687 "Determination of Temperature Rise and Fatigue Resistance of Vulcanized Rubber in Flexural Test". GB/T 1687 has released the following parts. ---Part 1.Basic principles; ---Part 3.Compression flexion test (constant strain type); ---Part 4.Constant stress flexion test. This document uses the translation method equivalent to ISO 4666-4.2018 ``Determination of Temperature Rise and Fatigue Resistance of Vulcanized Rubber in Flexural Test Part 4.Constant Stress Flexural Test. The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 1687.1-2016 Determination of temperature rise and fatigue resistance of vulcanized rubber in flexural test Part 1.Basic Principle (ISO 4666-1.2010, IDT); ---GB/T 2941-2006 Rubber physical test methods, general procedures for sample preparation and adjustment (ISO 23529.2004, IDT); ---GB/T 9870.1-2006 Determination of dynamic properties of vulcanized rubber or thermoplastic rubber Part 1.General rules (ISO 4664- 1.2005, IDT). Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is organized by the General Test Methods Subcommittee of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35/SC2) Focus. Drafting organizations of this document. Yiweiyi Rubber Research Institute Co., Ltd., Wanli Tire Co., Ltd., Guizhou Tire Co., Ltd., Gao Twell Scientific Instruments (Qingdao) Co., Ltd., Qingdao Junxiang Technology Co., Ltd., Anhui Jiatong Passenger Radial Tire Co., Ltd., Sailun (East Operation) Tire Co., Ltd., Triangle Tire Co., Ltd., Jiangsu Mingzhu Testing Machinery Co., Ltd., Shanghai Hongpu Instrument Technology Co., Ltd. Company, Shandong Yanggu Huatai Chemical Co., Ltd., Shanghai Fasen Testing Technology Co., Ltd., Beijing Rubber Industry Research and Design Institute Co., Ltd. The main drafters of this document. Chen Xiaojie, Liu Aiqin, Han Xiao, Shang Weijun, Feng Ping, Wang Peng, Sheng Entian, Zuo Jiqiang, Wang Zhiye, Liu Zhijiang, Wu Xianhe, Gao Liting, Li Xiaoxuan, Ma Xiuju, Xu Qiuhuan, Bao Dafei, Jin Zhuyin, Ma Delong, Li Yunfeng, Gong Jianming, Zhang Zhiyuan, Xie Junfang, Sun Siwen.

Introduction

The purpose of GB/T 1687 is to establish a test method for determining the temperature rise and fatigue resistance of vulcanized rubber in a flexural test. It is intended to consist of three parts. constitute. ---Part 1.Basic principles. The purpose is to explain the general principle of vulcanized rubber flexing test, and define the Terms and definitions. ---Part 3.Compression flexion test (constant strain type). The purpose is to specify the vulcanized rubber in the constant strain amplitude flexural test Method for measuring temperature rise and fatigue resistance. ---Part 4.Constant stress flexion test. The purpose is to specify the temperature rise and resistance of vulcanized rubber in the constant stress amplitude flexural test Method for measuring fatigue performance. This document gives a method for compressive flexion test by applying a constant amplitude dynamic load. Its characteristics and significance are as follows. a) In order to accurately simulate the heat-generating behavior of rubber products in use, selecting the appropriate temperature measurement point is an important consideration. and GB/T 1687.3 measures the different surface temperature of the sample, and the constant stress flexural testing machine uses a needle-shaped temperature detector to directly measure the sample The temperature of the inner center (this part is a hot spot). b) During the test, the dynamic performance of the rubber (viscoelastic Parameter) as a function of time. c) Through continuous information feedback, it was once considered difficult to detect the initial stage or initial stage of damage due to heat generation. Signs become possible. Compared with the result of the test according to the method described in GB/T 1687.3, the temperature rise of the constant stress compression flexion test is compared with the rise of the tire temperature. High has a good correlation. Temperature rise and fatigue resistance of vulcanized rubber in flexural test Determination of performance. Part 4.Constant stress flexural test Warning 1---The personnel using this document should have practical experience in formal laboratory work. This document does not indicate all possible safety Questions, users are responsible for taking appropriate safety and health measures, and to ensure that they meet the requirements of relevant national laws and regulations. Warning 2-Certain steps specified in this document may involve the use or generation of certain wastes, which may cause harm to the local environment. The relevant documents shall stipulate appropriate safe operation and waste disposal clauses after use.

1 Scope

This document describes the method of measuring the temperature rise and fatigue resistance of vulcanized rubber using a constant stress flexing tester. Many rubber products (such as tires and conveyor belts) require periodic dynamic loads with constant amplitude during testing. In order to make the experiment The laboratory test results have a good correlation with the actual operating conditions of the product. This document gives the corresponding test methods under the above conditions. This document does not apply to vulcanized rubber with a hardness above 85IRHD.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. ISO 4664-1 Determination of dynamic properties of vulcanized rubber or thermoplastic rubber Part 1.General (Rubber, vulcanizedor thermoplastic-Determinationofdynamicproperties-Part 1.Generalguidance) ISO 4666-1 Determination of temperature rise and fatigue resistance of vulcanized rubber in a flexural test Part 1.Basic principles (Rubber, vulcanized-Determinationoftemperatureriseandresistancetofatigueinflexometertesting-Part 1. Basicprinciples) ISO 18899.2013 Rubber-Guide to the calibration of test equipment (Rubber-Guide to the calibration of test equipment) ISO 23529 Rubber-General proceduresforpre- paringandconditioningtestpiecesforphysicaltestmethods)

3 Terms and definitions

The terms and definitions defined in ISO 4666-1 and ISO 4664-1 apply to this document. The addresses of the terminology databases maintained by ISO and IEC for standardization are as follows.

4 Principle

On a cylindrical specimen with a pre-static load, a periodic dynamic load with a constant amplitude is applied for compression, and the temperature of the specimen can be measured. appreciation. The fatigue life of the sample is given by the number of cycles when failure occurs or the test time. Specimen height change (creep) and dynamic characteristics Can be measured as a function of time. After the test, measure the compression set of the sample. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1687.4-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1687.4-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1687.4-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1687.4-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.