GB/T 16722.3-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16722.3-2008: Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process
Status: Valid

GB/T 16722.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 16722.3-2008	169	Add to Cart	3 days	Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process	Valid
GB/T 16722.3-1996	199	Add to Cart	2 days	Technical product documentation--Handling of computer-based technical information--Phases in the product design process	Obsolete

Similar standards

GB/T 17851   GB/T 16892   GB/T 15823   GB/T 19799.3   GB/T 16722.4   GB/T 16722.1   

Basic data

Standard ID: GB/T 16722.3-2008 (GB/T16722.3-2008)
Description (Translated English): Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 01.100.01
Word Count Estimation: 7,76
Date of Issue: 2009-01-01
Date of Implementation: 2009-01-01
Older Standard (superseded by this standard): GB/T 16722.3-1996
Quoted Standard: GB/T 13361; GB/T 15751; GB/T 16722.1
Adopted Standard: ISO 11442-2006, NEQ
Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the documents required to develop a new product design process guidelines. This section applies to computer-aided design (including units within and communication between units, quality assurance, acquisition and development of technology management system), manual design may be used.

GB/T 16722.3-2008: Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical product documentation. Handling of computer-based technical information. Phases in the product design process ICS 01.100.01 J04 National Standards of People's Republic of China Replacing GB/T 16722.3-1996 Technical product documentation Computer Aided Technology Information Processing Product design process state (ISO 11442.2006, Technicalproductdocumentation- Documentmanagement, NEQ) Posted 2009-01-01 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

In GB/T 16722 "Technical product documentation - computer-aided information processing technology" This general heading comprises the following four components. --- GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements --- GB/T 16722.2 Technical product documentation computer-aided technical information - Original documentation --- GB/T 16722.3 Technical product documentation - computer-aided information processing technology product design process state --- GB/T 16722.4 Technical product documentation computer-aided technical information - Document management and retrieval system This section is based on the International Organization for Standardization ISO 11442.2006 "Technical Product File Management" in Chapter 5, "Design Files series System work in all stages "and" typical rule "Annex A compiled file revision, revise the international standards on the use of technical content, On a non-equivalent with consistency. This Part replaces GB/T 16722.3-1996 "Technical product documentation - computer-aided information processing technology in the product design process State ", the contents of the main changes are. --- According to GB/T 1.1 and the requirements of this section, modify and increase the "scope" and content "Normative documents"; --- According to the International Organization for Standardization ISO 11442.2006 "Technical Product File Management" content, which increases the Chapter 5 "Product design" and "Appendix A typical rule file revisions" section, and the contents of Chapter 4 of Appendix A as a discharge Included in this section; --- Also, relevant content on standard text on the modifications made. Appendix A of this section is an informative annex. This part of the National Technical product documentation Standardization Technical Committee. This part of the National Technical product documentation Standardization Technical Committee. This section is drafted. the machine Productivity Promotion Center, Shaanxi Province Institute of Standardization, Chengdu Hang Lee (Group) Co., Ltd., Jilin University of Technology, China Electronics Technology Group Corporation 28th Research Institute. The main drafters of this section. Ding Hongyu, Hou Segovia, Cui Zhiyong, Xiaojiu Lin, Wang Xiuying, Zhang Hongqi. This part of the standard replaces the previous editions are. --- GB/T 16722.3-1996. Technical product documentation Computer Aided Technology Information Processing Product design process state

1 Scope

This section GB/T 16722 specifies the new norm-setting process of the desired product design documents. This section applies to computer-aided design (including the units and internal communication between units, quality assurance, acquisition and development of technology management System), manual design may also be used.

2 Normative references

The following documents contain provisions which, through reference GB/T 16722 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 13361 Technical Drawing generic term GB/T 15751 Technical product documentation computer-aided design and drafting vocabulary (GB/T 15751-1995eqv ISO /T R 10623.1992) GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements (GB/T 16722.1-2008, ISO 11442-1.2006, NEQ)

3 Terms and Definitions

This part of GB/T 13361 definitions and GB/T 15751 in.

4 Product Design Process

4.1 editing stage product design documents The following describes the generation of what documents and where the design cycle. Product development process can be divided into behavioral analysis, concept Design, basic and detailed design, the following illustration (see Figure 1).

1 Product Development Process

......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16722.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16722.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16722.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16722.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16722.3-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16722.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.