Home   Cart   Quotation   Policy   About-Us
www.ChineseStandard.net
SEARCH

GB/T 16671-2018 English PDF

US$679.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16671-2018: Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
Status: Valid

GB/T 16671: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 16671-2018679 Add to Cart 6 days Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) Valid
GB/T 16671-2009RFQ ASK 6 days Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) Obsolete
GB/T 16671-1996959 Add to Cart 6 days Geometrical tolerancing--Maximum material requirement, least material requirement and reciprocity requirement Obsolete

Similar standards

GB/T 17851   GB/T 16892   GB/T 15823   GB/T 16675.2   GB/T 16675.1   

Basic data

Standard ID: GB/T 16671-2018 (GB/T16671-2018)
Description (Translated English): Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 01.100.20
Word Count Estimation: 34,374
Date of Issue: 2018-09-17
Date of Implementation: 2019-04-01
Older Standard (superseded by this standard): GB/T 16671-2009
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 16671-2018: Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specification(GPS) - Geometrical tolerancing - Maximum material requirement(MMR) , least material requirement(LMR) and reciprocity requirement(RPR) ICS 01.100.20 J04 National Standards of People's Republic of China Replace GB/T 16671-2009 Product Geometric Specifications (GPS) Geometric Tolerance Maximum entity requirement (MMR), minimum entity Requirements (LMR) and Reversible Requirements (RPR) Maximummaterialrequirement(MMR), leastmaterialrequirement(LMR)and (ISO 2692.2014, MOD) 2018-09-17 released.2019-04-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 16671-2009 Product Geometric Specification (GPS) Geometric tolerance maximum entity requirements, minimum entity Requirements and Reversible Requirements, the main technical changes compared with GB/T 16671-2009 are as follows. --- Add reference document information and further interpretation for terms and definitions; --- Increase the scope of the size elements applicable to this standard. This standard uses the redrafting method to modify the use of ISO 2692.2014 "product geometry specification (GPS) geometric tolerance maximum Body Requirements (MMR), Minimum Entity Requirements (LMR), and Reversible Requirements (RPR). There are technical differences between this standard and ISO 2692.2014, and the terms involved in these differences have been passed on the outer margins of the margins. The vertical single line (—) is marked. The corresponding technical differences and their reasons are as follows. ---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace ISO 1101.2012 with GB/T 1182-2018 modified to international standards. This standard has made the following editorial changes. --- Informative Appendix C, change the matrix model of ISO 14638.1995 used in the original standard to the new moment of ISO 14638.2015 Matrix model. This standard is proposed and managed by the National Technical Committee for Standardization of Geometrical Specifications (SAC/TC240). This standard was drafted. China Machine Productivity Promotion Center, Kuanzhi Automobile Co., Ltd., Beijing Automobile Co., Ltd., Shanghai Automotive Group Technology Center of Co., Ltd., SAIC-GM-Wuling Automobile Co., Ltd., Zhengzhou University, Omnex (Shanghai) Consulting Co., Ltd., Xi'an Jiaotong University, Dai Keyi (Beijing) Technology Co., Ltd., Hexagon Measurement Technology (Qingdao) Co., Ltd., Carl Zeiss (Shanghai) Management Co., Ltd. Company, Pan Asia Automotive Technology Center Co., Ltd. The main drafters of this standard. Ming Cuixin, Shen Yujun, Qiu Chenxi, Zhou Jiangqi, Zhang Linna, Teng Lijing, Xu Mingyang, Zheng Peng, Yu Jichang, Jing Weizhen, Long Dongfei, Wang Huizhen, Han Dingzhong, Hu Min, Zhu Yue. The previous versions of the standards replaced by this standard are. ---GB/T 16671-1996, GB/T 16671-2009. Product Geometric Specifications (GPS) Geometric Tolerance Maximum entity requirement (MMR), minimum entity Requirements (LMR) and Reversible Requirements (RPR)

1 Scope

This standard specifies the terms and definitions of the maximum entity requirements, minimum entity requirements and reversible requirements, basic provisions, pattern representation methods and Application example. These requirements apply only to dimension elements. This standard applies to situations where workpiece dimensions and geometric tolerances are related to each other to meet their specific functions, such as meeting part assembly (most Large entity requirements), minimum wall thickness (minimum entity requirements), but maximum entity requirements and minimum entity requirements also apply to other functional requirements. Considering the correlation between dimensions and geometrical elements, when using the maximum entity requirement, minimum entity requirement or reversible requirement, The principle of independence as defined in GB/T 4249 no longer applies.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1182-2018 Geometrical Product Specifications (GPS) Geometric tolerance shape, orientation, position and runout tolerance (ISO 1101..2017, IDT) GB/T 18780.2-2003 Technical specification for geometrical quantities (GPS) - Geometrical elements - Part 2. Description of cylindrical and conical surfaces Take the center line, the extraction center plane of the parallel plane, and extract the local dimensions of the features (ISO 14660-2.1999, IDT) ISO 5459.2011 Geometrical Product Specifications (GPS) Geometric Tolerance Benchmarks and Benchmark Systems [Geometricalproduct Specifications(GPS)-Geometricaltolerancing-Datumsanddatumsystems] ISO 14405-1.2010 Geometrical Product Specifications (GPS) Geometrical tolerances Part 1. Linear dimensions [Geometrical Productspecifications(GPS)-Dimensionaltolerancing-Part 1.Linearsizes] ISO 17450-1.2011 Geometrical Product Specifications (GPS) Geometrical tolerances Part 1. Geometric specification and validated models [Geometricalproductspecifications(GPS)-Generalconcepts-Part 1.Modelforgeometricalspecifi- Cationandverification]

3 Terms and definitions

GB/T 18780.2-2003, ISO 5459.2011, ISO 14405-1.2010, ISO 17450-1.2011 and the following terms And definitions apply to this document. 3.1 Component integralfeature A geometric element that belongs to the actual surface of the workpiece or to the surface model. Note 1. The constituent elements define the features themselves, such as the surface of the workpiece. Note 2. Quoted from ISO 17450-1.2011, definition 3.3.5. 3.2 Size element featureofsize Linear size element featureoflinearsize A geometric element with one or more essential features, only one of its essential characteristics can be used as a variable parameter, and the rest is "single Part of the parameter family and adhere to the single constraint attribute of this parameter. Note 1. Quoted from ISO 17450-1.2011, definition 3.3.1.5.1. For the "single parameter family" and "single constraint attribute", see also ISO 22432.2011, Meaning 3.2.5.1.1.1 and 3.2.5.1.1.2. Example 1. A single cylindrical hole or axis is a linear dimension element whose linear dimension is its diameter. Example 2. Two relatively parallel flat surfaces are linear sized features whose linear dimension is the distance between the two parallel planes. 3.3 Export feature derivedfeature The geometric elements that do not actually exist on the actual surface of the workpiece are not the nominal components. Note 1. The derived features can be obtained from the nominal, fitted or extracted features. Can be called a nominal derived feature, a fitted derived feature, or an extraction guide Out of the elements. Note 2. The types of derived features include the center point, centerline, and center plane defined from one or more components. Note 3. Quoted from ISO 17450-1.2011, definition 3.3.6. Example 1. The centerline of a cylinder is the derived feature taken from the component of the cylindrical surface. The axis of the nominal cylinder is the nominal derived element. Example 2. The center plane of two relatively parallel flat surfaces is the derived element obtained from the two parallel flat surfaces, which can constitute a constituent element. These two The center plane of a relatively parallel plane is a nominal derived element. 3.4 Maximum entity state maximummaterialcondition MMC When the local dimension of the extracted component of the dimension element is at the limit size and has the largest material (the largest entity) State, such as the smallest diameter of the hole and the maximum diameter of the shaft. Note 1. In this standard, the term maximum entity state (MMC) is used to indicate that it needs attention at the ideal or nominal factor level (see ISO 17450-1.2011). The required limit (upper or lower limit). Note 2. The default mode or a special definition of several extracted feature sizes (see ISO 14405-1.2010) can be used to define the maximum entity state (MMC). The size of the extracted features. Note 3. As defined in this standard, the Maximum Entity State (MMC) can be used explicitly with any definition of the extracted feature size. 3.5 Maximum physical size maximummaterialsize MMS Determines the size of the feature's largest entity state. Note 1. One of the default definitions or one of the specific definitions of several extracted feature sizes (see ISO 14405-1.2010 and GB/T 18780.2-2003) Maximum physical size (MMS). Note 2. In this standard, the maximum physical size (MMS) is a given value, so it is not necessary to specifically define the extraction size to explicitly use the most Large physical size (MMS). Note 3. See Appendix A. 3.6 Minimum entity state leastmaterialcondition LMC Assume that the local size of the extracted component is at the limit size and has the least amount of material (the smallest entity), for example Such as the maximum diameter of the hole and the minimum diameter of the shaft. Note 1. In this standard, the term minimum entity state (LMC) is used to indicate that at the ideal or nominal factor level (see ISO 17450-1.2011), attention needs to be paid The limit (upper or lower limit) sought. Note 2. The default mode or a special definition of several extracted feature sizes (see ISO 14405-1.2010) can be used to define the minimum entity state (LMC). The size of the extracted features. Note 3. As defined in this standard, the Minimum Entity Status (LMC) can be used explicitly in conjunction with the definition of any extracted feature size. 3.7 Minimum physical size leastmaterialsize LMS Determines the size of the feature's minimum entity state. Note 1. One of the default definitions or one of the specific definitions of several extracted feature sizes (see ISO 14405-1.2010 and GB/T 18780.2-2003) The minimum physical size (LMS). Note 2. In this standard, the minimum physical size (LMS) is a given value, so it is not necessary to specifically define the extraction size to explicitly use the most Small physical size (LMS). Note 3. See Appendix A. 3.8 Maximum entity effective size maximummaterialvirtualsize MMVS The maximum physical dimension (MMS) of the dimension feature and the geometric tolerance (shape, orientation, or position) of its derived features size. Note 1. The Maximum Entity Effective Size (MMVS) is a size parameter that can be used as a value associated with the Maximum Entity Effectiveness (MMVC). Note 2. For outer dimension elements, MMVS is the sum of MMS and geometric tolerances, and for inner dimension features, is the difference between MMS and geometric tolerances. Note 3. MMVS, lMMVS, e of the outer dimension element are given by formula (1). lMMVS,e=lMMS δ (1) The MMVS, lMMVS, i of the inner dimension element is given by equation (2). lMMVS, i=lMMS-δ (2) In the formula. lMMS---Maximum physical size; δ --- geometric tolerance. 3.9 Maximum entity effect state maximummaterialvirtualcondition MMVC The state at which the feature is fitted to its largest physical effective size (MMVS). Note 1. The Maximum Entity Effectiveness (MMVC) is the ideal shape state of the feature. Note 2. When the geometric tolerance is the direction tolerance (see Figure A.3), the maximum entity effective state (MMVC) is affected by the direction of the fitting element (according to GB/T 1182- Constrained by.2018 and ISO 5459.2011). When the geometry specification is a position specification (see Figure A.4), the maximum entity effectiveness state (MMVC) is fitted to The position of the prime (according to GB/T 1182-2018 and ISO 5459.2011). Note 3. When the geometric tolerance is the direction tolerance (see Figure A.3), the maximum entity effective state (MMVC) is affected by the direction of the fitting element (according to GB/T 1182- Constrained by.2018 and ISO 5459.2011). When the geometry specification is a position specification (see Figure A.4), the maximum entity effectiveness state (MMVC) is fitted to The position of the prime (according to GB/T 1182-2018 and ISO 5459.2011). Note 4. See Figure A.1~Figure A.4, Figure A.6, Figure A.7 and Figure A.10~Figure A.13. 3.10 Minimum entity effective size leastmaterialvirtualsize LMVS The combination of the smallest physical dimension (LMS) of the dimension feature and the geometric tolerance (shape, direction, or position) of its derived feature size. Note 1. The Minimum Entity Effective Size (LMVS) is a size parameter that can be used as a value associated with the Minimum Entity Effectiveness (LMVC). Note 2. For outer dimension elements, LMVS is the difference between LMS and geometric tolerances, and for inner dimension features, it is the sum of LMS and geometric tolerances. Note 3. LMVS, lLMVS, e of the outer dimension element are given by equation (3). lLMVS, e=lLMS-δ (3) The LMVS, lLMVS,i of the inner dimension element is given by equation (4). lLMVS, i=lLMS δ (4) In the formula. lLMS---minimum physical size; δ --- geometric tolerance. 3.11 Minimum entity effect state leastmaterialvirtualcondition LMVC The state at which the feature is fitted to its smallest entity effective size (LMVS). Note 1. The minimum entity effect state (LMVC) is the ideal shape state of the feature. Note 2. When the geometric tolerance is the direction specification, the minimum entity effectiveness state (LMVC) is affected by the direction of the fitting element (according to GB/T 1182-2018 and Constrained by ISO 5459.2011). When the geometric tolerance is the position specification, the minimum entity effective state (LMVC) is affected by the position of the fitted feature (based on Constrained by GB/T 1182-2018 and ISO 5459.2011) (see Figure A.5). Note 3. See Figure A.5, Figure A.8 and Figure A.9. 3.12 Maximum entity requires maximummaterialrequirement MMR Non-ideal elements of a dimension element must not violate one of the size factor requirements of its Maximum Physical Effectiveness (MMVC), ie, the size A non-ideal element of a prime must not exceed one of the size factor requirements of its largest physical effectiveness boundary (MMVB). The largest entity effective state (MMVC) or maximum entity effective boundary is the same type and ideal shape as the measured dimension element The limit state of the geometric element, the size of which is MMVS. Note 1. The maximum physical requirement (MMR) can be used to control the assembly of the workpiece. Note 2. See also 4.2. 3.13 Minimum entity requires leastmaterialrequirement LMR Non-ideal elements of a dimension element must not violate one of the size factor requirements of its Minimum Entity Effectiveness (LMVC), ie, the size The non-ideal element of the prime must not exceed one of the size factor requirements of its smallest physical effect boundary (LMVB). Note 1. The minimum physical requirement (LMR) used in pairs can be used to control the minimum wall thickness, for example, the most between two symmetrical or coaxially arranged elements of the same size. Small wall thickness. Note 2. See also 4.3. 3.14 Reversible requirement reciprocityrequirement RPR Additional requirements for maximum entity requirements (MMR) or minimum entity requirements (LMR), indicating that dimensional tolerances can be small in actual geometric errors Correspondingly increases within the difference between the geometric tolerances. 4 Maximum Entity Requirements (MMR) and Minimum Entity Requirements (LMR) 4.1 Overview Maximum Entity Requirement (MMR) and Minimum Entity Requirement (LMR) can be used for a group of one or more as a measured element, and/or benchmark The size elements that make up. These requirements may specify the size of the dimension element and its derived feature geometry requirements (shape, direction or position) Combination requirements. Note 1. This version of this standard only contains dimensional elements of cylindrical and relatively parallel flat surface types. Therefore, the derived features can only be centerline and center plane. Note 2. In the ISO GPS standard, the thread element is considered to be a cylindrical dimension element. However, this standard does not define the application of MMR, LMR and RPR. The rules for threaded features. Therefore, the tools defined in this standard cannot be applied to thread elements. When the Maximum Entity Requirement (MMR) or Minimum Entity Requirement (LMR) is used, the two specifications (size specification and geometry specification) are Transformed into a common requirement specification. This common specification focuses only on the constituent elements, which are related to the polygon features of the dimensional elements in this standard. Note 3. The Maximum Entity Requirement (MMR) was once referred to as the Maximum Entity Principle (MMP). When the measured elements are not using the modifiers ( , and ), the ISO 14405-1.2010 and GB/T 18780.2-2003 are used. Take the dimension definition of the feature. ISO 5459.2011 is used when the benchmark does not use the modifier ( , ). Modifiers do not apply to benchmarks. 4.2 Maximum Entity Requirements (MMR) 4.2.1 Maximum entity requirements apply to measured elements The maximum entity requirement for the measured element specifies four separate requirements. --- The upper limit of the local size [see rule 1 in 1) and 2)]; --- Lower limit requirements for local dimensions [see rule B, 1) and 2)]; --- Do not violate the requirements of the MMVC surface (see rule C); --- Requirements involving more than one element (see rule D). When the maximum entity requirement (MMR) is used for the measured feature, the dimension element should be marked with a symbol in the tolerance box on the drawing. After measuring the geometric tolerances of the derived features. At this time, the following rules are specified for the polygon elements (of the dimension elements). a) Rule A The extracted local size requirements for the measured feature. 1) For outer dimension elements, equal to or less than the maximum physical size (MMS); 2) For inner dimension features, equal to or greater than the maximum physical size (MMS). Note 1. This rule can be changed when marked with a reversible requirement (RPR), ie a symbol after the symbol (see Chapter 5 and Figure A.1). b) Rule B The extracted local size requirements of the measured elements. 1) For outer dimension elements, equal to or greater than the minimum physical size (LMS) [see Figure A.2a), Figure A.3a), Figure A.4a), Figure A.6a), Figure A.7a), Figure A.10 and Figure A.11]; 2) For inner dimension elements, equal to or less than the minimum physical size (LMS) [see Figure A.2b), Figure A.3b), Figure A.4b), Figure A.6b), Figure A.7b), Figure A.10 and Figure A.11]. c) Rule C The extracted components of the measured element shall not violate its maximum entit......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16671-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16671-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16671-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16671-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16671-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16671-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.