GB/T 16306-2008 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16306-2008: Re-inspection and re-test procedures for assessment of declared quality levels Status: Valid GB/T 16306: Historical versions
Basic dataStandard ID: GB/T 16306-2008 (GB/T16306-2008)Description (Translated English): Re-inspection and re-test procedures for assessment of declared quality levels Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 19,186 Date of Issue: 2008-08-06 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 16306-1996 Quoted Standard: GB/T 2828.1-2003, GB/T 4882, GB/T 19000-2000, GB/T 15482, GB/T 6379.1, GB/T 6379.2, GB/T 8054, GB/T 10111, GB/T 13264, ISO 3534-1: 2006, ISO 3534-2: 1994, ISO 5725-6: 1994 Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the quality level of product quality claims retest assessment procedures and reinspection. When expressed as a percentage nonconforming overall quality level of verification to verify the overall volume of N should be greater than 250 and the total amount of the sample size should be greater than 10, ie N/n> 10. When the verification of the overall volume of less than 250, or in the aggregate amount of sample volume ratio of not greater than 10, retrieved from the standard sampling plans are approximate and should be used with caution, also according to GB/T 13264 determined by the method specified in the sampling programs. GB/T 16306-2008: Re-inspection and re-test procedures for assessment of declared quality levels---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Re-inspection and re-test procedures for assessment of declared quality levels ICS 03.120.30 A41 National Standards of People's Republic of China Replacing GB/T 16306-1996 Claimed that the level of quality and retest retest assessment procedures Posted 2008-08-06 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 3.1 Terms and definitions 3.2 Symbols 3 Reinspection program 4 sample product of Example 4 and 4.1 test results obtained under repeatability conditions acceptability of the test methods and the results of the final report to determine 4 4.2 Under reproducibility conditions acceptability of test results obtained testing methods and final reported results determined 5 4.3 Under intermediate precision conditions of test results obtained the acceptability of test methods and final reported results determined 6 4.4 Application Example 7 5 pairs of verifying the overall re-examination 8 5.1 verification of the overall re-examination procedures 8 5.2 implementation of the retest samples 9 Appendix A (informative) Quality verification sampling integrated OC curve 14ForewordThis standard specifies in product quality assessment of the overall re-examination and verification methods for sample products reinspection. This standard replaces GB/T 16306-1996 "product quality supervision and review procedures and sample solutions." The main technical differences between this standard and GB/T 16306-1996 is as follows. --- Will oversee the overall total to verification; --- Will not pass judgment value to the limit value; --- Increased normality test requirements; --- Increasing the quality level and actual claims compared with the level of quality determination is discussed; --- When the sample product retest increase the intermediate precision standard deviation about the content; --- Increased when the re-examination can not get to sample this standard to results of the first sampling of the final result; --- Increasing the sampling plan table. Appendix A of this standard is an informative annex. The standard proposed by China National Institute of Standardization. Application of this standard by the National Standardization Technical Committee on statistical methods. This standard was drafted. Wuxi City Product Quality Supervision and Inspection, China National Institute of Standardization, the Guangdong Provincial Administration for Industry and Commerce, Chinese people China Ordnance Engineering College, Academy of Mathematics and Systems Science Research Institute. The main drafters of this standard. CHEN Hua-ying, YU Zhen Fan, Chen Ye Huai, Wu Jianguo, Dingwen Xing, Chen Min, Zhang Yuzhu, Shi Feng Yong. This standard was first published in 1996, this revision is the first revision.IntroductionGB/T 16306 specifies in product quality assessment of the overall re-examination and verification of sample products retest method. This standard It consists of two parts. the verification of the overall re-examination and re-inspection of the detection object. The overall sampling, China has promulgated three sampling standard for quality verification, they are GB/T 2828.4 "count Sampling procedures for inspection - Part 4. Procedures for assessment of declared quality levels ", GB/T 2828.11" count sampling procedures Part 11 Score. small claims overall level of quality assessment procedures ", GB/T 6378.4" Sampling Inspection procedures - Part 4. Mean quality claims Volume level of assessment procedures. " Quality verification and quality inspection purposes are different, the sampling scheme used is different. Quality acceptance specified acceptance sampling System procedures apply to both parties (such as suppliers and consumers) between bilateral agreements. Acceptance sampling procedure used only as a test batch inspection The actual delivery of the product rule after a sample. Therefore, these programs do not explicitly involve any formal claim to the level of quality. Acceptance pumping Samples that can be received between the quality level of grant and non-grant received no clear boundaries. Counting adjustable and adjustable metering Programme (ISO 2859-1.1999, IDT) GB/T 4882 Statistical interpretation of data normality test (GB/T 4882-2001, idt ISO 5479.1997) GB/T 19000-2000 Quality Management System - Fundamentals and vocabulary (idt ISO 9000.2000) GB/T 15482 Product Quality Supervision and small overall counts one sampling procedures and sample forms GB/T 6379.1 measurement methods and results of Accuracy (trueness and precision) - Part 1. General principles and definitions (GB/T 6379.1-2004, ISO 5725-1.1994, IDT) GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the weight of a standard measurement method Refolding and basic methods of reproduction (GB/T 6379.2-2004, ISO 5725-2.1994, IDT) GB/T 8054 measurement standard sampling procedures and tables GB/T 10111 random number generation and its application in product quality sampling in GB/T 13264 percent nonconforming small batch count sampling procedures and sample forms ISO 3534-1.2006 Statistics Vocabulary and symbols - Part 1. General statistical terms and terms used in probability ISO 3534-2.2006 Statistics Vocabulary and symbols - Part 2. Applied Statistics ISO 5725-3.1994 Measurement methods and results Accuracy (trueness and precision) - Part 3. Standard Methods of measurement precision Intermediate measure ISO 5725-6.1994 Measurement methods and results Accuracy (trueness and precision) Part 6. practice of accuracy values 3 Terms, definitions and symbols GB/T 2828.1-2003, ISO 3534-1.2006, ISO 3534-2.2006 and GB/T 19000-2000 determine the terms, definitions, And the following symbols and terms, definitions and symbols apply to this standard. 3.1 Terms and Definitions 3.1.1 Sample product repeatability, reproducibility or under intermediate precision conditions further testing. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16306-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 16306-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16306-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16306-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16306-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16306-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
