GB/T 15532-2008 English PDF

US$1319.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15532-2008: Specification of computer software testing
Status: Valid

GB/T 15532: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 15532-2008	1319	Add to Cart	8 days	Specification of computer software testing	Valid
GB/T 15532-1995	599	Add to Cart	4 days	Computer software unit testing	Obsolete

Similar standards

GB/T 25000.51   GB/T 28172   GB/T 20918   GB/T 45395   GB/T 45400   GB/T 45281   

Basic data

Standard ID: GB/T 15532-2008 (GB/T15532-2008)
Description (Translated English): Specification of computer software testing
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L77
Classification of International Standard: 35.080
Word Count Estimation: 60,631
Date of Issue: 2008-04-11
Date of Implementation: 2008-09-01
Older Standard (superseded by this standard): GB/T 15532-1995
Quoted Standard: GB/T 8566; GB/T 9386; GB/T 11457; GB/T 16260.1; GB/T 18492; GB/T 20158
Regulation (derived from): Announcement of Newly Approved National Standards No. 6, 2008 (No. 119 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the types of computer software, software product life cycle basic test methods, procedures and guidelines. This standard applies to the whole process of computer software life cycle. This standard applies to computer software development institutions, testing organizations and related personnel.

GB/T 15532-2008: Specification of computer software testing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification of computer software testing ICS 35.080 L77 National Standards of People's Republic of China Replacing GB/T 15532-1995 Computer software test specification Posted 2008-04-11 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 1 General 4.1 Test Objective 1 4.2 Test category 1 4.3 Test procedure 2 4.4 Test Method 2 4.5 Test Case 2 4.6 Test Management 4 4.7 Test Document 5 4.8 Test Tool 6 Relationship 4.9 software integrity level and testing 6 5 7 Unit Testing 5.1 test object and purpose 7 5.2 Test organization and management 7 5.3 Technical Requirements 7 5.4 Test content 7 9 5.5 Test Environment 5.6 Test Method 9 5.7 Test Procedure 9 5.8 Document 11 6 Integrated Test 11 6.1 test object and purpose 11 6.2 Test organization and management 11 6.3 Technical Requirements 11 6.4 Test content 12 6.5 Test Environment 12 6.6 Test Method 12 6.7 Test procedure 13 6.8 Document 14 7 test configuration items 15 7.1 test object and purpose 15 7.2 Test organization and management 15 7.3 Technical Requirements 15 7.4 Test content 16 7.5 Test Environment 19 7.6 Test Method 19 7.7 Test procedure 19 7.8 Document 21 8 System Test 21 8.1 test object and purpose 21 8.2 Test organization and management 21 8.3 Technical Requirements 22 8.4 Test content 22 8.5 Test Environment 25 8.6 Test Method 25 8.7 Test procedure 25 8.8 Document 27 9 Acceptance Test 27 9.1 test object and purpose 27 9.2 Test organization and management 28 9.3 Technical Requirements 28 9.4 Test content 28 9.5 Test Environment 28 9.6 Test Method 28 9.7 Test procedure 28 9.8 Document 30 10 30 Regression Testing 10.1 test object and test purposes 30 10.2 Regression testing unit 30 CI 10.3 Regression Testing 32 10.4 System Regression Testing 34 Appendix A (informative) Software Testing 37 A. 1 Static Test Method 37 A. 2 Dynamic Test Method 40 Annex B (informative) Recommended software reliability model 43 B. 1 Snyder Yun German model 43 B. 2 generalized exponential model 46 B. 3 Musa/Ao Kumu off logarithmic Poisson execution time model 48 B. 4 through Wude/Fuer Luo model 50 Annex C (informative) software testing parts of the template 52 C. 1 Software Test 52 C. 2 Software Testing Record 53 C. 3 software problem report card 54 Correspondence between Annex D (informative) software test content 55

Foreword

This standard replaces GB/T 15532-1995 "computer software unit testing." This standard and GB/T 15532-1995 main difference Do the following. a) Since the standard contents were expanded, so the standard name from the original "computer software unit testing" to the current "computer software Test specification "; b) standard structural adjustment changes as follows. GB/T 15532-1995 GB/T 15532-2008

1 Subject Matter and Scope

2 References

3 Terms

4 unit test activities

4.1 development of methodologies, resources and schedule 4.2 and related needs to be tested to determine the characteristics 4.3 Refinement Plan 4.4 Design of the test set 4.5 Design and Implementation of the Plan of Implementation 4.6 perform test procedures 4.7 check termination 4.8 Evaluation of the test results and the unit under test Appendix A Implementation and Usage Guide Appendix B concepts and assumptions

1 Scope

2 Normative references

3 Terms and Definitions

4 General

5 Unit Testing

6 Integration Testing

7 test configuration items

8 System Test

9 Acceptance Test

10 Regression Testing Appendix A Software Testing Methods Appendix B Software Reliability Recommended models Appendix C of the template Software Testing Appendix D Software Testing correspondence between the content c) by deleting the GB/T 15532-1995 custom term instead direct reference to GB/T 11457 terms and definitions; d) according to the new standards are "test object and purpose", "testing organization and management", "technical requirements" of the major test categories, "Test Content", "test environment", "Test Methods", "access", "quasi-out conditions", "test" and "output documents" and other Entries to make further demands. Relatively new standard structured more clearly require clearer and more workable. This standard Annex A, Annex B, Annex C and Annex D is informative appendix. The standard proposed by the People's Republic of China Ministry of Information Industry. This standard by the National Information Technology Standardization Technical Committee. This standard was drafted. Shandong square co-Information Technology Co., Ministry of Information Industry Electronic Standardization Institute, Beijing track And Communication Technology Institute, Shanghai Computer Software Development Center, China Aerospace Science and Technology Corporation Software Testing Center, Shandong Computer Science Center, Shanghai Baoxin Software Co., Ltd. Shanghai Pudong Software Platform, Guangxi Software Park, Shanghai Information Technology Co., Ltd. Lu Qixin. The main drafters of this standard. Wangying Long, Xu often gather, Feng Hui, Dong fire people, Vang Pao Ai, Yanggen Xing, Wang Xin, pillars, Yin Ping, Zhang Louying, Li Gang, Package by Lin, Yang Mei-hong, Han Qingliang. This standard was first published in 1995. Computer software test specification

1 Scope

This standard specifies the basic test methods, procedures and guidelines in the software life cycle of various types of computer software products. This standard applies to computer software life cycle process. This standard applies to computer software development organizations, institutions and testing phase Customs officers.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8566 Information technology - Software life cycle processes (GB/T 8566-2007, ISO /IEC 12207.1995, MOD) GB/T 9386 computer software test documentation specifications GB/T 11457 IT software engineering terminology GB/T 16260.1 Software engineering - Product quality - Part 1. Quality model (GB/T 16260.1-2006, ISO /IEC 9126-1.2001, IDT) GB/T 18492 IT systems and software integrity levels (GB/T 18492-2001, ISO /IEC 15026.1998, IDT) GB/T 20158 Information technology - Software life cycle processes Configuration Management (GB/T 20158-2006, ISO /IEC TR 15846.1998, IDT)

3 Terms and Definitions

Terms and definitions GB/T 11457 in established apply to this standard.

4 General

4.1 testing purposes Computer software testing purposes are. a) verify that the software meets the software development contract or project development plan, system/subsystem design documentation, software requirements specification, Software quality software design specifications and software product descriptions requirements; b) by testing, found that software defects; c) provide a basis for measuring and evaluating the quality of software products. 4.2 test categories According to GB/T 8566 requirements, the standard test categories described in detail as follows. a) unit testing; b) integration testing; c) Configuration tests (also known as software qualification testing or confirmation test); d) system testing; e) acceptance testing. May choose to perform test categories according to the size, type, software integrity level. Regression testing may be tested in each of the above categories, and throughout the entire software life cycle, it is classified separately described. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15532-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15532-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15532-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15532-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15532-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15532-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.