GB/T 15094-2008 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15094-2008: Terminology for ship technology -- Ship repairing technology Status: Valid GB/T 15094: Historical versions
Basic dataStandard ID: GB/T 15094-2008 (GB/T15094-2008)Description (Translated English): Terminology for ship technology -- Ship repairing technology Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U04 Classification of International Standard: 47.020.01 Word Count Estimation: 19,130 Date of Issue: 2008-07-30 Date of Implementation: 2009-02-01 Older Standard (superseded by this standard): GB/T 15094-1994 Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the relevant dock ship repair, hull, turbines and other aspects of the repair process terms and their definitions. This standard applies to research vessels, design, management and other areas that can be applied, teaching, manufacturing. GB/T 15094-2008: Terminology for ship technology -- Ship repairing technology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terminology for ship technology. Ship repairing technology ICS 47.020.01 U04 National Standards of People's Republic of China Replacing GB/T 15094-1994 Terminology for ship technology repair process Posted 2008-07-30 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 15094-1994 "Terminology for ship technology repair process." This standard compared with GB/T 15094-1994, there are the following changes. --- Remove the "superstate", "finder DEVIATION" term; --- Added the "underwater repair", "underwater adhesive," "steel sandwich plate structure" term; --- Added some Chinese and English Index index. The standard proposed by China State Shipbuilding Corporation. This standard by the National Standardization Technical Committee boat marine vessels based at the Technical Committee. This standard was drafted. China Shipbuilding Industry Corporation Tianjin shiprepair Institute of Technology. The main drafters. Zhang Shuqing, Yao Jun, Cui Circle, Zhouyue Li, Guo Fengyan. This standard replaces the standards previously issued as follows. --- GB/T 15094-1994. Terminology for ship technology repair process1 ScopeThis standard specifies the relevant ship repair dock, hull, machinery and other aspects of the repair process terms and their definitions. This standard applies to ships of the research, design, manufacturing, teaching, management, and other areas can be applied.2 dock repair2.1 The ship floating on the water moved to dry-dock or floating dock inside. 2.2 The dock dock inside the ship moved outside the job. 2.3 The ship along the inclined longitudinal or transverse row boat chute traction rise above the surface of the work. 2.4 According docking chart or line graph and the position of the previous recording and decided to dock docking pier, dock and pier height and the number of targeted operations. 2.5 Dock drainage process, feel free to adjust the position coordinates of the ship pier in the process according to the requirements. 2.6 According to the baseline at both ends of a connection bottom two points with a light look through approach to measuring points relative to this connection the keel line of vertical difference, sentenced Fixed keel local deformation method bottom. 2.7 Maintenance and repair of the underwater portion of the hull underwater and ancillary devices, including underwater inspection, cleaning, coating, sealing, welding, cutting Cut, replacement and maintenance. 2.8 Using a special process under underwater adhesive seal water damaged hull. 2.9 Use adhesive to the sleeve is fixed to the propeller shaft, rudder and pintle shaft and other parts of the process. 2.10 When the propeller shaft and propeller keyed, key button slot dimensions pairing process and the process of working with a whisk. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15094-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 15094-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15094-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15094-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15094-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15094-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
