GB/T 14853.1-2013 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14853.1-2013: Rubber compounding ingredients -- Pelletized carbon black -- Part 1: Determination of pour density
Status: Valid

GB/T 14853.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14853.1-2013	139	Add to Cart	3 days	Rubber compounding ingredients -- Pelletized carbon black -- Part 1: Determination of pour density	Valid
GB/T 14853.1-2002	239	Add to Cart	2 days	Rubber compounding ingredients -- Carbon black, pelletized -- Determination of pour density	Obsolete
GB/T 14853.1-1993	199	Add to Cart	2 days	Rubber compounding ingredients--Carbon black, pelletized--Determination of pour density	Obsolete

Similar standards

GB/T 7044   GB/T 3780.8   GB/T 3782   GB/T 14853.2   GB/T 14853.5   GB/T 14853.6   

Basic data

Standard ID: GB/T 14853.1-2013 (GB/T14853.1-2013)
Description (Translated English): Rubber compounding ingredients -- Pelletized carbon black -- Part 1: Determination of pour density
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G49
Classification of International Standard: 83.040.20
Word Count Estimation: 6,634
Older Standard (superseded by this standard): GB/T 14853.1-2002
Quoted Standard: GB 3778; GB/T 8170
Adopted Standard: ASTM D1513-2005, MOD
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method for measuring the density of the rubber poured with granulated carbon black. This standard applies to all types of rubber granulated carbon density was determined by pouring.

GB/T 14853.1-2013: Rubber compounding ingredients -- Pelletized carbon black -- Part 1: Determination of pour density

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber compounding ingredients Pelletized carbon black Part 1... Determination of pour density ICS 83.040.20 G49 National Standards of People's Republic of China Replacing GB/T 14853.1-2002 Carbon black, pelletized rubber Part 1. Determination of pour density Part 1. Determinationofpourdensity Issued on. 2013-12-31 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 14853 "Carbon black, pelletized rubber" is divided into five parts. --- Part 1. Determination of pour density; --- Part 2. Determination of fines content and the amount of wear particles; --- Part 4. Determination of mass strength; --- Part 5. Determination of particle size distribution; --- Part 6. Determination of the strength of a single particle breakage. This section GB/T 14853 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 14853.1-2002 "Rubber granulated carbon black pour density determination." And GB/T 14853.1-2002 phase Ratio, the main technical changes are as follows. --- Modify the standard name; Version --- 2002 is equivalent to using ISO 1306.1995, edition revised adoption ASTMD1513-05; --- Increase the volume of "624cm3" stainless steel cup (see 4.1); --- Added "stainless steel cup production methods" (see Note 4.1); --- Modify ruler specifications "130mm" is "150mm" (see 4.2); --- The "test procedure" has been described in greater detail (see 6.1); --- Modify the "precision" (see Chapter 8, edition 2002 Chapter 8); --- Increase the informative Appendix A. This section uses redrafted law revision adopted ASTMD1513-05 "Standard Test Method for granulated carbon black pour density determination." This section compared with ASTMD1513-05 more adjustments in the structure, listed in Appendix A of this section and ASTMD1513-05 The reg number control list. This section exists compared with ASTMD1513-05 technical differences, technical differences and their reasons are as follows. --- Remove the precision of the detailed description, with retention of the precision requirements (see ASTM D1513-05 Chapter 10, edition Chapter 9); --- Increased blurbs normative references and references relationship with ASTMD1799, D1900, D4483 without a corresponding I National standards (see Chapter 2 edition); --- Delete the words "pour density Cup" representation diameter "(4in ± 0.2in)", to fit our representation; while increasing "Note 2. You can also use other volumetric density of the cup, but the test results are consistent with the requirements" to facilitate the use of a standard user (see ASTMD1513-05 5.1, this version 4.1); --- Remove the ISO standard containers used 1000cm3 pour density calculation formulas, while increasing the description of the formula "If the volume of 1000cm3 pour density cup, pour density D (kg/m3) is equal to the carbon black in value Mass (g) ", and simplifies the formula (2), to facilitate the use of a standard user (see ASTMD1513-05 of 8.1.1,8.1.2, Chapter 7 of this edition). This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Rubber and rubber products Standardization Technical Committee of carbon black Technical Committee (SAC/TC35/SC5) centralized. This section is responsible for drafting unit. China Rubber Group Carbon Black Research & Design Institute. The main drafters of this section. Niesu Qing, Mrs. This part of the standard replaces the previous editions are. --- GB/T 14853.1-1993, GB/T 14853.1-2002. Carbon black, pelletized rubber Part 1. Determination of pour density

1 Scope

GB/T 14853 provisions of this part of the rubber Carbon black, pelletized pour determination of density. This section applies to all types of rubber carbon black density was determined using pelletized pour.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 3778 carbon black for rubber GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment

3 Method summary

By weighing a known volume of the mass of carbon black, poured density calculated.

4 Instrument

4.1 cups pour density, or volume 1000cm3 624cm3, highly uniform, no decanted lip. Stainless steel cups, diameter (100 ± 5) mm. Note 1. The cup pour density can be made in the following manner. at 20 ℃, or 624cm3 1000cm3 pour water in diameter (100 ± 5) mm volume 1000cm3 1200cm3 or stainless steel cup, at the level of well marked, then the lathe clamping vehicles knife to cut off the mark. Note 2. You can also use other volumetric density Cup, but consistent with the requirements of the test results. 4.2 ruler or blade length of at least 150mm. 4.3 Balance precision of 0.1g.

5 Sampling

Sampled according to the provisions of GB 3778.

6 Test procedure

6.1 never exceed 50mm above the center of the rim of the glass, poured it in the black cup peeled density, carbon black to overflow the rim and on the density of the square Into a cone. During the test, the density of the cup should maintain the natural resting state. Holding a ruler or vertical blade close to the rim of the glass container, scrape Black top, so that the surface is horizontal. 6.2 weighing the carbon black quality, accurate to 0.1g. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14853.1-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14853.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14853.1-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14853.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14853.1-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14853.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.