GB/T 14834-2009 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14834-2009: Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals
Status: Valid

GB/T 14834: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14834-2009	369	Add to Cart	3 days	Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals	Valid
GB/T 14834-1993	279	Add to Cart	3 days	Rubber, vulcanized. Determination of adhesion to, and corrosion of, metals	Obsolete

Similar standards

GB/T 14837.3   GB/T 15254   GB/T 15256   GB/T 14837.2   GB/T 14837.1   

Basic data

Standard ID: GB/T 14834-2009 (GB/T14834-2009)
Description (Translated English): Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G40
Classification of International Standard: 83.060
Word Count Estimation: 16,126
Date of Issue: 2009-04-24
Date of Implementation: 2009-12-01
Older Standard (superseded by this standard): GB/T 14834-1993
Adopted Standard: ISO 6505-2005, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.6 (Total No.146)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method for the determination of metal adhesion and corrosive effect on metal with vulcanized rubber or thermoplastic rubber exposed to the specified test environment. Appendix A of the test method involves calibration tables necessary equipment. This standard applies to general assessment of vulcanized rubber or thermoplastic rubber and metal adhesion and metal corrosion.

GB/T 14834-2009: Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals ICS 83.060 G40 National Standards of People's Republic of China Replacing GB/T 14834-1993 Vulcanized or thermoplastic rubber Determination of adhesion to metal and metal corrosive effect (ISO 6505.2005, MOD) Posted 2009-04-24 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 6505.2005 "vulcanized rubber or thermoplastic rubber and metal to metal adhesion and corrosion testing role Fixed "(in English). This standard replaces GB/T 14834-1993 "vulcanized rubber and metal-to-metal adhesion and corrosion effects of measurement." This standard is based on ISO 6505.2005 redrafted. This standard and ISO 6505.2005 and the following reasons difference. instead of ISO with GB grade metal metal grades for the domestic market buy. --- ISO 6505 standard specified in ISO 209-1 grades AlCu4SiMg condition TF aluminum, in line with GB/T 3190 in grade aluminum 2A14 solution treated and precipitation process substitute; --- ISO 6505 standard specified in ISO 630 Fe360A carbon steel grades, in line with GB/T 700 in grades Q235A Instead of carbon steel; --- ISO 6505 standard EN1652 stipulated in grades CuZn37 brass, in line with GB/T 5231 in grades H63 Instead of brass; --- ISO 6505 standard EN1652 stipulated in grade Cu-ETP copper, in line with GB/T 5231 in T2 copper grades instead. For ease of use, this standard made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) use a decimal point instead of a decimal comma ",". ","; c) Remove the preface to international standards. This standard and GB/T 14834-1993 compared to the main changes are as follows. --- Changing the name of the standard; Determination of the object --- expanded from vulcanized rubber vulcanized rubber, thermoplastic rubber; --- Test grades from the original aluminum LY11 to 2A14 (1993 edition Chapter VI; Chapter 6 of this edition); --- Test strip metal plate size increased (50 ± 1) mm × 100mm (Chapter 6 of this edition); --- Rubber O-ring to increase the sample specimen (Excerpts 7.1.2,9.5.1.2,9.5.2.2); --- Added two test cycles (96 ± 2) h and (120 ± 2) h (edition 8.2); --- The test procedure is described in different test environments, respectively. (Edition 9.5); --- Corrosion evaluation test in different environments will be described separately. (Excerpts 10.2); --- Increase normative annex A and informative Annex B. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standards Commission rubber rubber physical and chemical test methods for Standardization Technical Committee (SAC/TC35/SC2) centralized. This standard was drafted. Shanghai Institute of Rubber Products. The main drafters of this standard. Bianzheng Jun, Yang Chenyun. This standard replaces the standards previously issued as follows. --- GB/T 14834-1993. Vulcanized or thermoplastic rubber Determination of adhesion to metal and metal corrosive effect Warning. Use of this standard shall have a person experiences regular lab work. This standard is not intended to involve the use of this standard may be out Security issues now, the user has the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations. Note. Some operations covered by this standard may be used to generate some substance or waste generation and local environmental pollution Movies Sound, appropriate documentation should develop these materials after use disposal.

1 Scope

This standard specifies the vulcanized rubber or thermoplastic rubber to metal adhesion measured exposure and the role of metal corrosion in the specified test environment Setting Method. Appendix A - based testing method involves calibration table necessary equipment. This standard applies to general assessment of vulcanized rubber or thermoplastic rubber and metal-to-metal adhesion and corrosion.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 700 carbon structural steel (GB/T 700-2006, ISO 630.1995, NEQ) GB/T 2941 rubber physical test method for preparing and conditioning General Procedure (GB/T 2941-2006, ISO 23529.2004, IDT) GB/T 3190 Wrought aluminum and aluminum alloy chemical composition (GB/T 3190-2008, ISO 209.2007, MOD) GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product GB/T 6003.1 woven wire mesh test sieve (GB/T 6003.1-1997, eqvISO 3310-1.1990) GB/T 6031 vulcanized rubber or thermoplastic rubber hardness measurement (10 ~ 100IRHD) (GB/T 6031-1998, idtISO 48. 1994) ISO 18899 rubber test equipment calibration Guidelines Principle 3 The vulcanized rubber or thermoplastic rubber samples according to a predetermined condition is sandwiched between two metal test plates, in dry or humid atmosphere through Over a certain period of time. By visual inspection to determine its degree of adhesion and corrosion on metal surfaces.

4 Materials

4.1 acetone (clean metals). AR. 4.2 Other suitable solvents (cleaning rubber). AR, rubber and should not adversely affect the test. 4.3 pumice. mesh size should be able to meet the basic dimensions GB/T 6003.1 standard prescribed for the test sieves 53μm. 4.4 distilled water or corresponding purity water. 4.5 silica gel.

5 test device

5.1 In accordance with the general laboratory requirements, and add the following content. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14834-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14834-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14834-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14834-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14834-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14834-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.