GB/T 14811-2008 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14811-2008: Heat pipe terminology Status: Valid GB/T 14811: Historical versions
Basic dataStandard ID: GB/T 14811-2008 (GB/T14811-2008)Description (Translated English): Heat pipe terminology Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J75 Classification of International Standard: 27.060.30 Word Count Estimation: 19,121 Date of Issue: 6/26/2008 Date of Implementation: 1/1/2009 Older Standard (superseded by this standard): GB/T 14811-1993 Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the basic terms of the heat pipe. This Standard is applicable to science, technology, products, and other areas of the heat pipe. GB/T 14811-2008: Heat pipe terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Heat pipe terminology ICS 27.060.30 J75 National Standards of People's Republic of China Replacing GB/T 14811-1993 The term heat pipe Posted 2008-06-26 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 14811-1993 "Heat Pipe term." This standard and GB/T 14811-1993 compared to the main changes are as follows. --- Increased roads, steam tubes and liquid tubes 21 terms; --- Cancel the effective length of the state and steady state and seven terms; --- Replaced by the following terms. "Heat pipe thermal switch" to "heat pipe thermal switch"; "Reservoir chamber" to "compensation" and "reservoir"; "Gas holder" to "gas chamber"; "Longitudinal grooved heat pipe" to "axially grooved heat pipe"; "Heat pipe start" to "start"; "Compatible" to "compatibility"; "Magneto-hydrodynamic heat pipe" to "magnetic power heat pipe"; --- Name "heat pipe structure" to "heat tubes" (1993 edition, see Chapter 2; Excerpts see 2.1); --- Name "special heat pipe" to "kind of heat pipe" (1993 edition, see Chapter 4; see edition 2.3). The standard proposed by China Aerospace Science and Technology Corporation. The standard by the China Aerospace Science and Technology Corporation. This standard drafting unit. China Academy of Space Technology in general, Chinese Academy of Sciences Institute of Engineering Thermophysics, Nanjing University of Technology. The main drafters of this standard. Shaoxing Guo, Guo Shun, Zhang, Qu Wei, Miaojian India. This standard replaces the standards previously issued as follows. --- GB/T 14811-1993. The term heat pipe1 ScopeThis standard specifies the basic terms of the heat pipe. This standard applies to the heat pipe science, technology, and other fields.2 Terms and definitions2.1 heat tubes 2.1.1 In suction capillary structure to drive the working fluid circulating evaporation, condensation heat transfer device. 2.1.2 Heat pipe is provided in the capillary suction force structure and the flow channel for the liquid refrigerant reflux. 2.1.3 Heat pipe for transferring heat of the working medium. 2.1.4 Die and inclusive working fluid housing. 2.1.5 Heat pipe liquid refrigerant absorbs heat vaporized into gaseous means (district, sections). 2.1.6 Condenser Gaseous refrigerant heat pipe heat from the gas into a liquid device (district, sections). 2.1.7 Heat pipe between the evaporator and condenser heat exchange with the outside world does not segment (region). 2.1.8 Heat pipe for transporting liquid working fluid channel structure. 2.1.9 A mesh net constructed dies. 2.1.10 The envelope wall of the axial channel formed dies. ...... |
