| GB/T 14609-2008 English PDFUS$239.00 ยท In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14609-2008: Inspection of grain and oils -- Determination of copper, iron, manganese, zinc, calcium, magnesium in cereals and derived products by atomic absorption and flame spectrophotometry Status: Obsolete GB/T 14609: Historical versions
 Basic dataStandard ID: GB/T 14609-2008 (GB/T14609-2008)Description (Translated English): Inspection of grain and oils -- Determination of copper, iron, manganese, zinc, calcium, magnesium in cereals and derived products by atomic absorption and flame spectrophotometry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B20 Classification of International Standard: 67.060 Word Count Estimation: 6,610 Date of Issue: 2008-11-04 Date of Implementation: 2009-01-20 Older Standard (superseded by this standard): GB/T 14609-1993 Quoted Standard: GB/T 602; GB/T 6682 Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the determination of copper in cereal and cereal products by flame atomic absorption spectrometry, iron, manganese, zinc, calcium, principle of magnesium, reagents, instruments and equipment, analysis step, calculated results and repeatability. This standard applies to cereals and products of copper, determination of magnesium and other elements, iron, manganese, zinc, calcium. The method detection limit: copper 0. 6mg/kg, iron 2. 4mg/kg, manganese 0. 5mg/kg, zinc 0. 4mg/kg, calcium 1. 5mg/kg, magnesium 0. 7mg/kg. GB/T 14609-2008: Inspection of grain and oils -- Determination of copper, iron, manganese, zinc, calcium, magnesium in cereals and derived products by atomic absorption and flame spectrophotometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Inspection of grain and oils. Determination of copper, iron, manganese, zinc, calcium, magnesium in cereals and derived products by atomic absorption and flame spectrophotometry ICS 67.060 B20 National Standards of People's Republic of China Replacing GB/T 14609-1993 Inspection of grain and grain products Determination of copper, iron, manganese, zinc, calcium, magnesium Flame Atomic Absorption Spectrometry Posted 2008-11-04 2009-01-20 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 14609-1993 "Grain of copper, iron, manganese, zinc, calcium, magnesium assay atomic absorption spectrometry." This standard compared with GB/T 14609-1993, the main technical differences are as follows. --- Modify the standard Chinese name changed to "Inspection of grain and grain products Flame copper, iron, manganese, zinc, calcium, magnesium Atomic Absorption Spectrometry "; --- Increasing the detection limit; --- Increased wet digestion and microwave digestion first two sample preparation methods. The standard proposed by the National Food Authority. This standard by the National Standardization Technical Committee OILS. This standard was drafted. Ministry of Agriculture, Grain Products Quality Supervision and Testing Center (Harbin). The main drafters of this standard. Chenguo You, Liu Feng, Du Yingqiu, Xiaobo Zhang, Cheng Aihua, Ma Yonghua, Wang Yuekai. This standard replaces the standards previously issued as follows. --- GB/T 14609-1993. Inspection of grain and grain products Determination of copper, iron, manganese, zinc, calcium, magnesium Flame Atomic Absorption Spectrometry1 ScopeThis standard specifies the principles of measurement and cereal products in copper, iron, manganese, zinc, calcium and magnesium by flame atomic absorption spectrometry, reagents, instruments And equipment, analytical step, the results of calculations and repeatability. This standard applies to the determination of grain and its products in copper, iron, manganese, zinc, calcium, magnesium and other elements. The detection limit. copper 0.6mg/kg, iron 2.4mg/kg, manganese 0.5mg/kg, zinc 0.4mg/kg, calcium 1.5mg/kg, Magnesium 0.7mg/kg.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 602 Determination of impurities in chemical reagents prepared standard solution (GB/T 602-2002, ISO 6353-1 with. 1982, Reagentsforchemicalanalysis-Part 1. Generaltestmethods, NEQ) GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) Principle 3 The sample was ashing or acid digestion, the sample to be tested so that all of the elements into the test solution and diluted to the appropriate concentration range. Import atom Absorption spectrometer, measuring the absorbance at each element characteristic wavelength within a certain range of concentration, absorbance is directly proportional to the content of the element, and Quantitative comparison of standard series.4 ReagentsUnless otherwise indicated, the reagents should be of analytical grade, test water should be consistent with GB/T 6682 stipulated two of water. 4.1 hydrochloric acid. 4.2 nitrate. 4.3 perchloric acid. 4.4 Hydrogen peroxide (30%). 4.5 mixed acid digestion solution. nitric acid + perchloric acid (4 + 1, volume ratio). 4.6 0.5mol/L nitric acid solution. Measure 32mL of nitric acid (4.2), diluted with water to 1000mL. 4.7 50g/L lanthanum solution. Weigh 58.65g of lanthanum oxide (La2O, 99.99%), wetted with a small amount of water, was added 150mL of hydrochloric acid (4.1) were dissolved, and finally diluted with water to 1000mL. 4.8 copper, iron, manganese, zinc, calcium, magnesium single element standard stock solution. According to the provisions of GB/T 602 preparation, or by the National Research Center mention For; the concentration of 1000mg/L or 500mg/L. 4.9 copper, iron, manganese, zinc, calcium, magnesium series uses single element standard solution. According to the need of a single element standard stock solution (4.8) with nitric acid solution (4.6) stepwise diluted to the appropriate concentration (Table 2) of the standard working solution, which together formed the elements listed in Table 1 using a standard series solution. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14609-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14609-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14609-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14609-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14609-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14609-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |