GB/T 13400.1-2012 English PDFUS$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13400.1-2012: Network planning techniques -- Part 1: General terms Status: Valid GB/T 13400.1: Historical versions
Basic dataStandard ID: GB/T 13400.1-2012 (GB/T13400.1-2012)Description (Translated English): Network planning techniques -- Part 1: General terms Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 07.020 Word Count Estimation: 24,281 Older Standard (superseded by this standard): GB/T 13400.1-1992 Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the network planning technique commonly used terms and their definitions. This section applies to all industries and construction program management and other areas of scientific research work. GB/T 13400.1-2012: Network planning techniques -- Part 1: General terms---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Network planning techniques Part 1. General terms ICS 07.020 A41 National Standards of People's Republic of China Replacing GB/T 13400.1-1992 Network Planning Technique Part 1. Common Terms Part 1. Generalterms Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅱ 1 Scope 1 Terminology 1 2 2.1 associated with the term network planning 1 2.2 and network planning methods related terms 2 2.3 and network diagrams related terms 3 2.4 and time parameters related terms 7 2.5 network planning and optimization and management-related terminology 10 Index 13 Pinyin index 13 English equivalents index 15ForewordGB/T 13400 "Network Planning Technology", consists of the following three parts. --- Part 1. Common terminology; --- Part 2. General method of drawing the network; --- Part 3. project management application in the general procedure. This section GB/T 13400 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 13400.1-1992 "network planning technique commonly used term," compared with the GB/T 13400.1-1992, the main To technical changes are as follows. --- Name change. From "Network planning technique commonly used term" for the "Network planning technique - Part 1. Common terms"; --- Structural Adjustment. the original standard "basic terms" "Network Planning Technology" "network map", "network plan" Section 4 of the structural adjustment "and the 5 structure of the network-related program, the term "and so on. --- Added "Double - Code Time Scale Network Map" "Single Code overlapping network map", "key nodes" "milestone" in "wave line", "cutting line method" "Earned Value Method" "Minute Network Planning Law" and other eight terms. Abolition of the "network simulation program Law", "set the node" "branch node", etc. Three terms. This section is proposed and managed by the China National Institute of Standardization. This part mainly drafted by. China National Institute of Standardization, Beijing Institute of Engineering Science, Management, Chinese Academy of Sciences. The main drafters of this section. Hongyan, Zhan Wei, Li Xiaolin, Zhang graceful, Gan Xi Shao, Cong ECONOMY. This part of the standard replaces the previous editions are. --- GB/T 13400.1-1992.IntroductionNetwork planning technique is that people in management practice created for program management in order to ensure the realization of the intended target management techniques. it is A scientific and effective management methods, is widely used in industries program management and project management planning, implementation, control all stage. Its greatest feature is able to provide a variety of information for the project management plan to help managers implement rational organization of tasks, so Overall planning, a clear focus, optimize resources, to achieve the project objectives. In China, the network planning technology in the 1960s, promoted and applied to the 80's and project management, and gradually Its core technology and become an important part, and has been a great development, has accumulated rich experience. In order to regulate the operation of Network Planning Technology Terms and definitions, formulated section. Network Planning Technique Part 1. Common Terms1 ScopeGB/T 13400 provisions of this part of the common terms and their definitions of network planning techniques. This section applies to program management and construction industries and other areas of scientific research.2 Terms2.1 associated with the term network planning 2.1.1 definitions 2.1.1.1 Network Planning networkplan Filling work schedule (2.3.2.1) in the network map (2.3.1.1) in the time parameters of the formation. Note. The time limit (2.4.27) as a constraint, the time limit may be prepared as network planning. 2.1.1.2 Network Planning Technique networkplanningtechniques With network planning (2.1.1.1) the work of the task (2.3.2.1) schedule be arranged and controlled to ensure that plans to achieve the objectives set Management techniques. 2.1.2 Classification 2.1.2.1 based on work classification code 2.1.2.1.1 Node network activity-on-nodenetworkplan; AO-Nnetworkplan Network plans to Node Network (2.3.1.4) represented by (2.1.1.1). 2.1.2.1.2 - Arc network planning activity-on-arrownetworkplan; AO-Anetworkplan Network plans to double arrow network (2.3.1.2) represented by (2.1.1.1). 2.1.2.2 Given the nature of classification 2.1.2.2.1 Certainly Network Project deterministicnetworkplan Work (2.3.2.1), the logical relationship between the work (2.3.3.1) and Duration (2.4.1) are positive network plan (2.1.1.1). 2.1.2.2.2 Non-Network Project is certainly un-deterministicnetworkplan Work (2.3.2.1), the logical relationship between the work (2.3.3.1) and Duration (2.4.1) in any one or more uncertain Network Program (2.1.1.1). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13400.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 13400.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13400.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13400.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13400.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13400.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
