GB/T 13376-2008 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13376-2008: Plastic scintillators
Status: Valid

GB/T 13376: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13376-2008	419	Add to Cart	3 days	Plastic scintillators	Valid
GB/T 13376-1992	479	Add to Cart	4 days	Plastic scintillators	Obsolete

Similar standards

GB/T 13286   NB/T 20318   GB/T 24247   GB/T 45608   GB/T 43189   GB/T 40291   

Basic data

Standard ID: GB/T 13376-2008 (GB/T13376-2008)
Description (Translated English): Plastic scintillators
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: F88
Classification of International Standard: 27.120
Word Count Estimation: 18,195
Date of Issue: 2008-07-02
Date of Implementation: 2009-04-01
Older Standard (superseded by this standard): GB/T 13376-1992
Quoted Standard: GB/T 10257-2001; GB/T 10263-2006; GB/T 13181; EJ/T 1061
Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the classification of plastic scintillator, technical requirements, test methods, inspection rules, packaging and storage. This standard applies to all kinds of plastic scintillator products, such products quality inspection and quality assessment basis.

GB/T 13376-2008: Plastic scintillators

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic scintillators ICS 27.120 F88 National Standards of People's Republic of China Replacing GB/T 13376-1992 Plastic scintillator Posted 2008-07-02 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Category 1 5 2 Technical Requirements Test Method 5 6 7 Inspection rules 13 8 signs, packaging, transportation and storage 13 Figure 1 scintillator performance measurement system block diagram of a pulse 6 Compton edge distribution Figure 2 pulse amplitude distribution 6 Measuring device 3 single photon scintillation decay time measurement block diagram of FIG. 11 Figure 4 schematic emission spectrum measurement device 12 Table 1 Classification and specifications plastic scintillator 2 Table 2 Appearance Size 3 Table 3 plastic scintillator appearance requirements 3 Table 4 4 \u200b\u200blight output performance Table 5 ordinary plastic scintillator core performance indicators 4 Table 6 high β/γ-type plastic scintillator core performance indicators 4 Table 7 Reference conditions and standard test conditions 5 Table 8 Table 13 inspection items Categories

Foreword

This standard replaces GB/T 13376-1992 "plastic scintillator." This standard compared with GB/T 13376-1992 main changes are as follows. --- Increasing the term "β and γ efficiency ratio" (see 3.5); --- Table table title will be increased; --- Table 3 reduced the number of defects allowed to exist and size (see 5.2); --- Original table is split into 5 tables 5 and 6, in order to articulate common plastic scintillator core performance indicators and high β/γ-type plastic scintillator The core performance indicators (see 5.4); --- Increasing the measurement probe β/γ-type plastic scintillator (see 6.6); --- Detailed drawing of FIG. 3, the single-photon measurement of scintillation decay time measuring devices more intuitive (see 6.8.2). The standard proposed by China National Nuclear Corporation. This standard by the National Standardization Technical Committee on nuclear instrumentation. This standard was drafted. nuclear (Beijing) Nuclear Instrument Factory. The main drafters of this standard. Qu Yuhui. This standard replaces the previous standard release case. GB/T 13376-1992. Plastic scintillator

1 Scope

This standard specifies the classification of plastic scintillator, technical requirements, test methods, inspection rules, packaging and storage. This standard applies to all kinds of plastic scintillator products, these products quality inspection and quality assessment basis.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 10257-2001 nuclear instruments and nuclear radiation detectors Quality inspection rule GB/T 10263-2006 nuclear radiation detectors of environmental conditions and test methods GB/T 13181 scintillator Methods for measuring performance EJ/T 1061 nuclear radiation detector type designation

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 The number of photons emitted by the scintillator with wavelength or photon energy profile of the change. [GB/T 4096.6-1996, the definition 2.3.13] 3.2 From the scintillator by a single shot to the time of its maximum photon emission rate dropped to 1/e of need. [GB/T 4096.6-1996, the definition 2.3.5] 3.3 The number of particle detectors to measure the ratio of the number of particles in the same time interval of the detector. [GB/T 4096.6-1996, the definition 2.1.23] 3.4 Test or calibration system for correcting other scintillator scintillator properties. 3.5 When measuring β-ray source in the strong field of γ, β and γ detection efficiency detection efficiency ratio.

4 Products

4.1 Classification plastic scintillator body Classified plastic scintillator in Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13376-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13376-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13376-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13376-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13376-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13376-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.