GB/T 13281-2008 English PDFUS$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13281-2008: Lead-acid battery used for passenger trains Status: Valid GB/T 13281: Historical versions
Basic dataStandard ID: GB/T 13281-2008 (GB/T13281-2008)Description (Translated English): Lead-acid battery used for passenger trains Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K84 Classification of International Standard: 29.220.20 Word Count Estimation: 15,172 Date of Issue: 2008-06-13 Date of Implementation: 2009-03-01 Older Standard (superseded by this standard): GB/T 13281-1991 Quoted Standard: JB/T 2599 Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the lead-acid batteries used for passenger trains terminology, product classification, technical requirements, test methods, inspection rules and signs packaging, transport and storage. This standard applies to passenger train lighting and other electrical DC power supply with lead-acid batteries. GB/T 13281-2008: Lead-acid battery used for passenger trains---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Lead-Acid battery used for passenger trains ICS 29.220.20 K84 National Standards of People's Republic of China Replacing GB/T 13281-1991 Passenger Train with lead-acid batteries Posted 2008-06-13 2009-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 13281-1991 "Passenger Train with lead-acid batteries." The original standard GB/T 13281-1991 compared to the main changes are as follows. Technical requirements and test methods of using VRLAB. --- Increased terminology, symbols --- Increasing the product classification and environmental requirements --- Increasing the open circuit voltage consistency --- Increasing the capacity consistency --- Increased low capacity --- Increase the large current discharge characteristics --- Increase performance Overcharge --- To increase the sealing reaction efficiency --- Explosion increase capacity --- The ability to increase the anti-mist --- Increasing the exhaust valve performance --- Increased air tightness --- Modification charge retention ability --- Modify cycle endurance capacity --- Cancellation sealant performance test The standard proposed by China Electrical Equipment Industrial Association. The standard lead-acid batteries by the National Standardization Technical Committee (SAC/TC69) centralized. Drafting of this standard. Shenyang Institute of batteries, Battery Co., Ltd. Zhejiang Yue, Feng Day Electric Group Company Limited. The main drafters of this standard. Xie Shuang, Cao Miaogen, Songyong Jiang, Zhao key, Peng Jianhui. This standard replaces the standards previously issued as follows. --- JB1864-76, GB/T 13281-1991. Passenger Train with lead-acid batteries1 ScopeThis standard specifies the railroad passenger car lead-acid batteries terms, product classifications, technical requirements, test methods, inspection rules and signs package Loading, transport and storage. This standard applies to rail passenger lighting and other electrical DC power supply used in lead-acid batteries (hereinafter referred to as a battery).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. JB/T 2599 lead-acid battery Model methodology 3 terminology, symbols 3.1 Capacity values \u200b\u200bunder specified conditions as measured by the manufacturer claims the battery. The Standard 10-hour rate (hereinafter represented by 10hr) capacity With the amount of C10 (Ah) said the rate of 5 hours (hereinafter represented by 5hr) capacity with C5 (Ah), where 1-hour rate (hereinafter represented by 1hr) Capacity He is represented by C1 (Ah). Values \u200b\u200bare shown in Table 1. 3.2 Under specified conditions the battery can actually be measured release of electricity; this standard is represented by Ca (Ah). 3.3 At low temperature -40 ℃ the battery can actually be measured release of electricity; this standard is represented by Cd (Ah). 3.4 The term indicates the size of the battery charge and discharge current, the value shown in Table 1. This standard with I10 (A), I5 (A), I1 (A) represented. 3.5 Under specified conditions, the internal battery gas produced by the decomposition of water is reduced to a negative absorption of water efficiency; this standard with η (%) FIG. 3.6 Open circuit voltage combinations Consistency. Under specified conditions, more than two or two single 2V or 12V batteries in series during use of the terminal voltage display like consistency state. This standard is represented by ΔU (V). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13281-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 13281-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13281-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13281-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13281-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13281-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
